Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

KM™

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (1566)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1562)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1562)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1562)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1562)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1562)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1566)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1566)
  • M Stainless Steel (1559)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1559)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1559)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1559)
  • K Cast Iron (1589)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1589)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1589)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1586)
  • N Non-Ferrous Materials (1509)
    • N1
      Wrought Aluminum
      (1491)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1487)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (990)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1486)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1471)
    • N6
      Carbon, Graphite Composites, CFRP
      (1372)
    • N7
      MMC's
      (1368)
  • S High-Temp Alloys (1580)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1578)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1580)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1578)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1550)
  • H Hardened Materials (1330)
    • H1
      Hardened Materials 44-48 HRC
      (1330)
    • H2
      Hardened Materials 48-55 HRC
      (1249)
    • H3
      Hardened Materials 56-60 HRC
      (1142)
    • H4
      Hardened Materials >60 HRC
      (1087)
Applications
  • Back Boring Back Boring (469)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (166)
  • Blind Hole Finishing Blind Hole Finishing (166)
  • CRT Boring CRT Boring (3)
  • CRT Profiling CRT Profiling (3)
  • Chamfer Turning Chamfer Turning (608)
  • Convex Drilling Convex Drilling (9)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (9)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (9)
  • Counterboring Counterboring (9)
  • Countersinking Countersinking (9)
  • Cut-Off Cut-Off (215)
  • Deep Grooving Deep Grooving (233)
  • Drilling Drilling (12)
  • Face Grooving Face Grooving (199)
  • Facing Facing (1155)
  • Flat Bottom Drilling Flat Bottom Drilling (9)
  • Grooving Grooving (246)
  • ID Facing ID Facing (66)
  • ID Grooving ID Grooving (237)
  • ID Thread Turning ID Thread Turning (225)
  • Inclined Entry Drilling Inclined Entry Drilling (9)
  • Inclined Exit Drilling Inclined Exit Drilling (9)
  • Multiple Direction Cutting Multiple Direction Cutting (1607)
  • OD Thread Turning OD Thread Turning (227)
  • Plunge Turning Plunge Turning (621)
  • Pre-Condition Pre-Condition (23)
  • Profiling Profiling (1110)
  • Stacked Plates Drilling Stacked Plates Drilling (9)
  • TRN Boring TRN Boring (936)
  • Threading Threading (204)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (166)
  • Through Hole Finishing Through Hole Finishing (166)
  • Turning Turning (1226)
  • X-Offset Drilling X-Offset Drilling (9)
Cutting Diameter
  • 15.875 (1)
  • 17.462 (1)
  • 19.05 (1)
  • 20.638 (1)
  • 22.225 (1)
  • 23.812 (1)
  • 25.4 (1)
  • 26.988 (1)
  • 27.0 (1)
  • 28.575 (1)
  • 29.0 (1)
  • 30.162 (1)
  • 31.0 (1)
  • 31.75 (1)
  • 33.35 (1)
  • 34.925 (1)
  • 38.1 (1)
  • 39.7 (1)
  • 41.275 (1)
  • 44.45 (1)
  • 47.625 (1)
  • 49.212 (1)
  • 50.8 (1)
to
Cutting Diameter
  • 0.625 (1)
  • 0.6875 (1)
  • 0.75 (1)
  • 0.8125 (1)
  • 0.875 (1)
  • 0.9375 (1)
  • 1.0 (1)
  • 1.0625 (1)
  • 1.063 (1)
  • 1.125 (1)
  • 1.1417 (1)
  • 1.1875 (1)
  • 1.2205 (1)
  • 1.25 (1)
  • 1.313 (1)
  • 1.375 (1)
  • 1.5 (1)
  • 1.563 (1)
  • 1.625 (1)
  • 1.75 (1)
  • 1.875 (1)
  • 1.9375 (1)
  • 2.0 (1)
to
Type of Thread
  • 55 (80)
  • 60 (218)
  • ACME (166)
  • API (111)
  • API BUTTRESS (20)
  • API RD (117)
  • BSPT (60)
  • BSW (139)
  • BUTTRESS (138)
  • M (164)
  • NPT (119)
  • NPTF (60)
  • RD DIN 405 (74)
  • STUB ACME (133)
  • TR DIN 103 (74)
  • UN (198)
  • UNJ (119)
Cutting Condition
  • Heavily Interrupted Cut (1392)
  • Interrupted (741)
  • Lightly Interrupted Cut (1412)
  • Smooth Cut (1414)
  • Varying Depth of Cut (1406)
Maximum Hole Depth [L4]
  • 1.875 (1)
  • 2.0625 (1)
  • 2.25 (1)
  • 2.4375 (1)
  • 2.625 (1)
  • 2.8125 (1)
  • 3.0 (1)
  • 3.1875 (1)
  • 3.189 (1)
  • 3.375 (1)
  • 3.4252 (1)
  • 3.5625 (1)
  • 3.6614 (1)
  • 3.75 (1)
  • 3.939 (1)
  • 4.125 (1)
  • 4.5 (1)
  • 4.689 (1)
  • 4.875 (1)
  • 5.25 (1)
  • 5.625 (1)
  • 5.8125 (1)
  • 6.0 (1)
to
Maximum Hole Depth [L4]
  • 47.625 (1)
  • 52.388 (1)
  • 57.15 (1)
  • 61.912 (1)
  • 66.675 (1)
  • 71.438 (1)
  • 76.2 (1)
  • 80.962 (1)
  • 81.0 (1)
  • 85.725 (1)
  • 87.0 (1)
  • 90.488 (1)
  • 93.0 (1)
  • 95.25 (1)
  • 100.051 (1)
  • 104.775 (1)
  • 114.3 (1)
  • 119.101 (1)
  • 123.825 (1)
  • 133.35 (1)
  • 142.875 (1)
  • 147.638 (1)
  • 152.4 (1)
to
Reach
  • 64.0 (1)
  • 72.0 (1)
  • 76.0 (1)
  • 81.0 (1)
  • 86.0 (1)
  • 90.0 (1)
  • 95.0 (1)
  • 96.0 (1)
  • 100.0 (1)
  • 103.0 (1)
  • 107.0 (1)
  • 110.0 (1)
  • 115.0 (1)
  • 117.0 (1)
  • 123.0 (1)
  • 129.0 (1)
  • 139.0 (1)
  • 145.0 (1)
  • 158.0 (1)
  • 167.0 (1)
  • 182.0 (1)
  • 187.0 (1)
  • 191.0 (1)
to
Reach
  • 2.5197 (1)
  • 2.8346 (1)
  • 2.9921 (1)
  • 3.189 (1)
  • 3.3858 (1)
  • 3.5433 (1)
  • 3.7402 (1)
  • 3.7795 (1)
  • 3.937 (1)
  • 4.0551 (1)
  • 4.2126 (1)
  • 4.3307 (1)
  • 4.5276 (1)
  • 4.6063 (1)
  • 4.8425 (1)
  • 5.0787 (1)
  • 5.4724 (1)
  • 5.7087 (1)
  • 6.2205 (1)
  • 6.5748 (1)
  • 7.1654 (1)
  • 7.3622 (1)
  • 7.5197 (1)
to
Tool Cutting Edge Angle
  • 45.0 (66)
  • 48.0 (15)
  • 49.783 (3)
  • 50.0 (4)
  • 61.0 (2)
  • 62.5 (25)
  • 63.0 (8)
  • 67.5 (4)
  • 72.5 (3)
  • 75.0 (157)
  • 85.0 (4)
  • 90.0 (479)
  • 92.0 (8)
  • 93.0 (388)
  • 95.0 (400)
  • 97.0 (4)
  • 107.5 (88)
to
Connection Style
  • Cutoff Support Blade A1-A3 (3)
  • KM (1177)
Number of Flutes
  • 2 (23)
Cutting Edges Per Insert
  • 1.0 (995)
  • 2.0 (1020)
  • 3.0 (311)
  • 4.0 (814)
  • 6.0 (159)
  • 8.0 (456)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (30)
  • 0.03 (68)
  • 0.033 (4)
  • 0.038 (140)
  • 0.05 (24)
  • 0.051 (102)
  • 0.056 (14)
  • 0.057 (29)
  • 0.066 (59)
  • 0.07 (29)
  • 0.076 (178)
  • 0.08 (122)
  • 0.081 (15)
  • 0.082 (13)
  • 0.085 (13)
  • 0.086 (13)
  • 0.089 (80)
  • 0.09 (80)
  • 0.091 (13)
  • 0.094 (59)
  • 0.097 (44)
  • 0.1 (772)
  • 0.102 (509)
  • 0.108 (15)
  • 0.116 (30)
  • 0.117 (29)
  • 0.127 (59)
  • 0.13 (4)
  • 0.131 (59)
  • 0.132 (59)
  • 0.133 (59)
  • 0.135 (13)
  • 0.15 (61)
  • 0.152 (29)
  • 0.155 (59)
  • 0.157 (59)
  • 0.159 (13)
  • 0.16 (44)
  • 0.165 (88)
  • 0.173 (59)
  • 0.177 (8)
  • 0.178 (103)
  • 0.18 (60)
  • 0.185 (25)
  • 0.19 (138)
  • 0.191 (138)
  • 0.198 (59)
  • 0.2 (880)
  • 0.202 (84)
  • 0.203 (518)
  • 0.21 (29)
  • 0.223 (13)
  • 0.224 (59)
  • 0.225 (4)
  • 0.235 (59)
  • 0.24 (13)
  • 0.244 (30)
  • 0.25 (59)
  • 0.251 (59)
  • 0.254 (88)
  • 0.255 (30)
  • 0.269 (72)
  • 0.279 (25)
  • 0.282 (59)
  • 0.284 (59)
  • 0.3 (92)
  • 0.305 (13)
  • 0.31 (12)
  • 0.315 (74)
  • 0.318 (109)
  • 0.33 (59)
  • 0.34 (168)
  • 0.343 (84)
  • 0.356 (59)
  • 0.38 (35)
  • 0.381 (36)
  • 0.394 (21)
  • 0.396 (4)
  • 0.397 (921)
  • 0.4 (1085)
  • 0.404 (59)
  • 0.406 (332)
  • 0.43 (59)
  • 0.432 (20)
  • 0.445 (88)
  • 0.472 (30)
  • 0.49 (59)
  • 0.5 (54)
  • 0.508 (59)
  • 0.51 (3)
  • 0.533 (7)
  • 0.565 (15)
  • 0.57 (29)
  • 0.572 (96)
  • 0.575 (59)
  • 0.6 (65)
  • 0.64 (3)
  • 0.7 (15)
  • 0.75 (50)
  • 0.76 (13)
  • 0.787 (117)
  • 0.79 (75)
  • 0.791 (14)
  • 0.792 (257)
  • 0.794 (951)
  • 0.795 (1)
  • 0.8 (1167)
  • 0.826 (12)
  • 0.84 (9)
  • 0.902 (88)
  • 0.93 (7)
  • 0.936 (15)
  • 0.97 (3)
  • 1.0 (123)
  • 1.01 (4)
  • 1.06 (10)
  • 1.188 (61)
  • 1.19 (160)
  • 1.191 (865)
  • 1.194 (109)
  • 1.195 (29)
  • 1.2 (1058)
  • 1.25 (109)
  • 1.404 (7)
  • 1.5 (121)
  • 1.515 (4)
  • 1.525 (12)
  • 1.585 (59)
  • 1.587 (148)
  • 1.588 (715)
  • 1.59 (27)
  • 1.6 (836)
  • 1.75 (109)
  • 1.98 (29)
  • 1.981 (59)
  • 2.0 (97)
  • 2.025 (9)
  • 2.25 (88)
  • 2.38 (51)
  • 2.381 (152)
  • 2.388 (88)
  • 2.39 (14)
  • 2.4 (302)
  • 2.5 (33)
  • 2.525 (4)
  • 3.0 (1)
  • 3.175 (29)
  • 3.18 (53)
  • 3.2 (133)
  • 4.0 (30)
  • 4.7625 (2)
  • 5.0 (4)
  • 6.0 (4)
  • 6.35 (12)
  • 8.0 (1)
  • 10.0 (3)
  • 12.5 (5)
  • 16.0 (4)
to
Corner Radius
  • 0.001 (37)
  • 0.0011 (16)
  • 0.0012 (15)
  • 0.0013 (4)
  • 0.0015 (140)
  • 0.002 (114)
  • 0.0023 (29)
  • 0.0026 (59)
  • 0.0028 (42)
  • 0.003 (178)
  • 0.0031 (122)
  • 0.0032 (28)
  • 0.0033 (13)
  • 0.0034 (13)
  • 0.0035 (80)
  • 0.0037 (59)
  • 0.0038 (44)
  • 0.0039 (13)
  • 0.004 (883)
  • 0.0043 (15)
  • 0.0046 (59)
  • 0.005 (63)
  • 0.0052 (59)
  • 0.0053 (72)
  • 0.0059 (60)
  • 0.006 (90)
  • 0.0062 (59)
  • 0.0063 (28)
  • 0.0065 (88)
  • 0.0068 (59)
  • 0.007 (107)
  • 0.0075 (138)
  • 0.0078 (96)
  • 0.0079 (67)
  • 0.008 (930)
  • 0.0083 (177)
  • 0.0088 (72)
  • 0.0089 (4)
  • 0.0093 (59)
  • 0.0094 (13)
  • 0.0096 (30)
  • 0.0099 (59)
  • 0.01 (88)
  • 0.0106 (72)
  • 0.011 (25)
  • 0.0111 (59)
  • 0.0112 (59)
  • 0.0118 (59)
  • 0.012 (46)
  • 0.0122 (12)
  • 0.0124 (59)
  • 0.0125 (109)
  • 0.013 (168)
  • 0.0135 (113)
  • 0.014 (59)
  • 0.015 (61)
  • 0.0155 (21)
  • 0.0156 (1043)
  • 0.0157 (9)
  • 0.0158 (34)
  • 0.0159 (59)
  • 0.016 (805)
  • 0.017 (79)
  • 0.0175 (88)
  • 0.0186 (30)
  • 0.0193 (59)
  • 0.0197 (54)
  • 0.02 (62)
  • 0.021 (7)
  • 0.022 (14)
  • 0.0225 (96)
  • 0.025 (3)
  • 0.0276 (15)
  • 0.0295 (50)
  • 0.0298 (13)
  • 0.031 (895)
  • 0.0311 (14)
  • 0.0312 (955)
  • 0.0313 (1154)
  • 0.0315 (244)
  • 0.032 (13)
  • 0.0325 (12)
  • 0.033 (9)
  • 0.0355 (88)
  • 0.0368 (7)
  • 0.0369 (15)
  • 0.038 (3)
  • 0.039 (10)
  • 0.0394 (113)
  • 0.0398 (4)
  • 0.042 (10)
  • 0.0468 (61)
  • 0.0469 (1058)
  • 0.047 (853)
  • 0.0472 (173)
  • 0.0492 (109)
  • 0.0516 (61)
  • 0.0553 (7)
  • 0.059 (12)
  • 0.0591 (121)
  • 0.0597 (4)
  • 0.06 (12)
  • 0.062 (12)
  • 0.0625 (976)
  • 0.063 (615)
  • 0.0689 (109)
  • 0.078 (59)
  • 0.0785 (9)
  • 0.0787 (88)
  • 0.079 (9)
  • 0.0797 (9)
  • 0.0886 (88)
  • 0.0928 (12)
  • 0.0938 (430)
  • 0.094 (204)
  • 0.098 (4)
  • 0.0984 (33)
  • 0.0985 (4)
  • 0.0994 (4)
  • 0.106 (29)
  • 0.1181 (1)
  • 0.125 (91)
  • 0.126 (71)
  • 0.1563 (156)
  • 0.1575 (30)
  • 0.1875 (2)
  • 0.1969 (4)
  • 0.197 (4)
  • 0.2362 (4)
  • 0.25 (12)
  • 0.312 (112)
  • 0.315 (1)
  • 0.3935 (3)
  • 0.3937 (3)
  • 0.492 (2)
  • 0.4922 (5)
  • 0.6299 (4)
  • 0.63 (4)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Interrupted (23)
  • Stable (23)
  • Unstable (23)
Grade Of Cutting Tool
  • 13E (653)
  • 241 (148)
  • AC5 (8)
  • ALO (21)
  • C2 (11)
  • C25 (18)
  • C3 (11)
  • CBN6 (11)
  • CG4 (3)
  • CG5 (71)
  • CG6 (36)
  • CL4 (427)
  • CM1 (71)
  • CM2 (650)
  • CM3 (470)
  • CM4 (300)
  • CM5 (7)
  • CPD1 (11)
  • CPX (636)
  • CS5 (23)
  • CW2 (292)
  • CW2015 (569)
  • CW3020 (16)
  • CW5025 (634)
  • GH1 (37)
  • GX (321)
  • HCK10 (69)
  • HCK20 (15)
  • HCM15 (4)
  • HK1500 (518)
  • HK35 (64)
  • HT2 (442)
  • HTX (315)
  • HWK10 (9)
  • HWK15 (72)
  • K00379 (20)
  • K060 (397)
  • K090 (736)
  • K1 (256)
  • K1010P (37)
  • K1025 (9)
  • K10M (879)
  • K10P (787)
  • K10U (672)
  • K15 (42)
  • K15U (769)
  • K20K (887)
  • K21 (355)
  • K25M (743)
  • K25P (736)
  • K2885 (109)
  • K313 (1308)
  • K35P (372)
  • K420 (819)
  • K45 (470)
  • K4H (84)
  • K6 (11)
  • K68 (1178)
  • KB1340 (282)
  • KB1345 (484)
  • KB1610 (647)
  • KB1625 (524)
  • KB1630 (548)
  • KB5610 (546)
  • KB5625 (667)
  • KB5630 (431)
  • KB9610 (777)
  • KB9640 (355)
  • KBH10 (710)
  • KBH10B (466)
  • KBH20 (729)
  • KBH20B (466)
  • KBK35 (156)
  • KBK45 (12)
  • KC210 (552)
  • KC250 (654)
  • KC5010 (1439)
  • KC5020P (72)
  • KC5025 (1454)
  • KC5410 (1144)
  • KC5510 (830)
  • KC5525 (551)
  • KC710 (372)
  • KC7140 (23)
  • KC720 (1101)
  • KC7215 (23)
  • KC722 (318)
  • KC7225 (23)
  • KC730 (1244)
  • KC7310 (887)
  • KC7315 (17)
  • KC732 (905)
  • KC7815 (23)
  • KC7820 (17)
  • KC7845 (6)
  • KC7935 (23)
  • KC8050 (1166)
  • KC810 (1270)
  • KC850 (1314)
  • KC9010 (984)
  • KC9025 (1142)
  • KC910 (1151)
  • KC9105 (1038)
  • KC9110 (1348)
  • KC9120 (1110)
  • KC9125 (1210)
  • KC9125RR (75)
  • KC9140 (878)
  • KC9145 (715)
  • KC9210 (109)
  • KC9215 (839)
  • KC9225 (1114)
  • KC9240 (1118)
  • KC9240NEW (1106)
  • KC9245 (840)
  • KC9315 (1130)
  • KC9320 (1198)
  • KC9325 (1012)
  • KC935 (1289)
  • KC950 (1143)
  • KC990 (1065)
  • KCD25 (378)
  • KCK05 (1109)
  • KCK05B (937)
  • KCK15 (1033)
  • KCK15B (1078)
  • KCK20 (1225)
  • KCK20B (1235)
  • KCM15 (1063)
  • KCM15B (989)
  • KCM25 (1139)
  • KCM25B (1056)
  • KCM35 (952)
  • KCM35B (658)
  • KCP05 (1021)
  • KCP05B (722)
  • KCP10 (1198)
  • KCP10B (1280)
  • KCP15 (19)
  • KCP25 (1221)
  • KCP25B (1296)
  • KCP30 (1111)
  • KCP30B (801)