Witamy
Potwierdź swoje preferencje
Aktualizuj preferencje

Sugestie dotyczące produktów

Product Family suggestions

Kennametal do usług

Czy masz pytanie dotyczące konkretnego produktu?

Zobacz pełną listę światowych specjalistów ds. usług według obszaru wiedzy specjalistycznej

Szybkie zamówienie
Pozycje pomyślnie dodano do koszyka
Wyświetl koszyk

PSC 63

Wybierz filtry
Filters
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (147)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (147)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (147)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (147)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (147)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (147)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (147)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (147)
  • M Stainless Steel (147)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (147)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (147)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (147)
  • K Cast Iron (147)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (147)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (147)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (147)
  • N Non-Ferrous Materials (141)
    • N1
      Wrought Aluminum (141)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (141)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (86)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (140)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (141)
    • N6
      Carbon, Graphite Composites, CFRP (136)
    • N7
      MMC's (136)
  • S High-Temp Alloys (143)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (143)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (143)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (143)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (143)
  • H Hardened Materials (130)
    • H1
      Hardened Materials 44-48 HRC (130)
    • H2
      Hardened Materials 48-55 HRC (115)
    • H3
      Hardened Materials 56-60 HRC (109)
    • H4
      Hardened Materials >60 HRC (103)
Applications
Applications
  • Back Boring Back Boring (1)
  • Chamfer Turning Chamfer Turning (4)
  • Facing Facing (102)
  • Grooving Grooving (9)
  • ID Facing ID Facing (84)
  • ID Grooving ID Grooving (9)
  • ID Thread Turning ID Thread Turning (19)
  • Multiple Direction Cutting Multiple Direction Cutting (118)
  • OD Thread Turning OD Thread Turning (3)
  • Plunge Turning Plunge Turning (15)
  • Profiling Profiling (20)
  • TRN Boring TRN Boring (84)
  • Turning Turning (111)
Type of Thread
Type of Thread
  • 55 (16)
  • 60 (37)
  • ACME (35)
  • API (23)
  • API BUTTRESS (4)
  • API RD (24)
  • BSPT (12)
  • BSW (28)
  • BUTTRESS (21)
  • M (29)
  • NPT (24)
  • NPTF (12)
  • RD DIN 405 (16)
  • STUB ACME (28)
  • TR DIN 103 (16)
  • UN (33)
  • UNJ (24)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (127)
  • Interrupted (73)
  • Lightly Interrupted Cut (127)
  • Smooth Cut (127)
  • Varying Depth of Cut (127)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (6)
  • 62.5 (2)
  • 72.5 (2)
  • 75.0 (12)
  • 90.0 (46)
  • 93.0 (35)
  • 95.0 (36)
  • 107.5 (10)
Tool Cutting Edge Angle Min do Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • PSC (98)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (94)
  • 2.0 (106)
  • 3.0 (20)
  • 4.0 (78)
  • 6.0 (4)
  • 8.0 (50)
Cutting Edges Per Insert Min do Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 2.047 in (2)
  • 2.126 in (1)
  • 2.205 in (1)
  • 2.362 in (2)
  • 2.559 in (87)
  • 2.757 in (3)
  • 2.953 in (2)
  • 3.543 in (5)
  • 3.938 in (7)
  • 4.134 in (4)
  • 4.331 in (7)
  • 4.724 in (2)
  • 4.921 in (2)
  • 5.513 in (18)
  • 5.71 in (1)
  • 6.891 in (5)
Over All Length [L] Min do Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 52.0 mm (2)
  • 54.0 mm (1)
  • 56.0 mm (1)
  • 60.0 mm (2)
  • 65.0 mm (87)
  • 70.0 mm (3)
  • 75.0 mm (2)
  • 90.0 mm (5)
  • 100.0 mm (7)
  • 105.0 mm (4)
  • 110.0 mm (7)
  • 120.0 mm (2)
  • 125.0 mm (2)
  • 140.0 mm (18)
  • 145.0 mm (1)
  • 175.0 mm (5)
Over All Length [L] Min do Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (9)
  • 0.002 in (37)
  • 0.003 in (33)
  • 0.004 in (86)
  • 0.005 in (14)
  • 0.006 in (30)
  • 0.007 in (21)
  • 0.008 in (85)
  • 0.01 in (21)
  • 0.011 in (14)
  • 0.012 in (15)
  • 0.014 in (38)
  • 0.015 in (1)
  • 0.016 in (96)
  • 0.017 in (16)
  • 0.019 in (19)
  • 0.02 in (15)
  • 0.021 in (2)
  • 0.023 in (19)
  • 0.024 in (4)
  • 0.028 in (5)
  • 0.03 in (3)
  • 0.031 in (113)
  • 0.035 in (19)
  • 0.037 in (6)
  • 0.039 in (16)
  • 0.047 in (110)
  • 0.049 in (14)
  • 0.055 in (1)
  • 0.06 in (15)
  • 0.062 in (26)
  • 0.063 in (101)
  • 0.069 in (14)
  • 0.078 in (12)
  • 0.079 in (19)
  • 0.089 in (19)
  • 0.094 in (21)
  • 0.095 in (52)
  • 0.098 in (7)
  • 0.125 in (7)
  • 0.126 in (21)
  • 0.157 in (8)
  • 0.197 in (1)
  • 0.237 in (2)
  • 0.313 in (2)
  • 0.315 in (2)
  • 0.394 in (2)
Corner Radius Min do Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (9)
  • 0.05 mm (37)
  • 0.076 mm (33)
  • 0.1 mm (86)
  • 0.125 mm (14)
  • 0.151 mm (30)
  • 0.176 mm (21)
  • 0.2 mm (85)
  • 0.225 mm (13)
  • 0.25 mm (21)
  • 0.275 mm (14)
  • 0.301 mm (15)
  • 0.325 mm (20)
  • 0.351 mm (37)
  • 0.375 mm (1)
  • 0.4 mm (96)
  • 0.426 mm (16)
  • 0.45 mm (19)
  • 0.476 mm (6)
  • 0.5 mm (15)
  • 0.525 mm (2)
  • 0.576 mm (19)
  • 0.601 mm (4)
  • 0.701 mm (5)
  • 0.75 mm (3)
  • 0.775 mm (14)
  • 0.8 mm (99)
  • 0.9 mm (19)
  • 0.925 mm (6)
  • 1.0 mm (16)
  • 1.201 mm (110)
  • 1.25 mm (14)
  • 1.401 mm (1)
  • 1.5 mm (14)
  • 1.526 mm (1)
  • 1.576 mm (26)
  • 1.6 mm (101)
  • 1.75 mm (14)
  • 1.975 mm (12)
  • 2.0 mm (19)
  • 2.25 mm (19)
  • 2.375 mm (21)
  • 2.401 mm (52)
  • 2.5 mm (7)
  • 3.176 mm (7)
  • 3.2 mm (21)
  • 4.0 mm (8)
  • 5.0 mm (1)
  • 6.0 mm (2)
  • 7.95 mm (2)
  • 8.0 mm (2)
  • 10.0 mm (2)
Corner Radius Min do Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (67)
  • 241 (14)
  • AC5 (4)
  • CG4 (2)
  • CL4 (49)
  • CM2 (65)
  • CM3 (53)
  • CM4 (28)
  • CM5 (6)
  • CPX (72)
  • CW2 (32)
  • CW2015 (63)
  • CW5025 (68)
  • GH1 (2)
  • GX (31)
  • HCK10 (6)
  • HCK20 (5)
  • HK1500 (54)
  • HK35 (6)
  • HT2 (51)
  • HTX (31)
  • HWK15 (6)
  • K00326 (3)
  • K00331 (6)
  • K060 (23)
  • K090 (72)
  • K1 (28)
  • K1010P (2)
  • K10M (92)
  • K10P (73)
  • K10U (61)
  • K15 (11)
  • K15U (61)
  • K20K (84)
  • K21 (29)
  • K25M (74)
  • K25P (74)
  • K2885 (14)
  • K313 (125)
  • K35P (52)
  • K420 (80)
  • K45 (26)
  • K4H (13)
  • K6 (1)
  • K68 (124)
  • K8735 (3)
  • KB1340 (17)
  • KB1345 (47)
  • KB1610 (41)
  • KB1625 (37)
  • KB1630 (48)
  • KB5610 (40)
  • KB5625 (49)
  • KB5630 (36)
  • KB9610 (59)
  • KB9640 (21)
  • KBH10 (61)
  • KBH10B (43)
  • KBH20 (71)
  • KBH20B (43)
  • KBK35 (14)
  • KC210 (55)
  • KC250 (67)
  • KC5010 (135)
  • KC5020P (13)
  • KC5025 (141)
  • KC5410 (119)
  • KC5510 (78)
  • KC5525 (46)
  • KC710 (43)
  • KC720 (106)
  • KC722 (41)
  • KC730 (121)
  • KC7310 (81)
  • KC732 (79)
  • KC8050 (106)
  • KC810 (121)
  • KC850 (125)
  • KC9010 (80)
  • KC9025 (99)
  • KC910 (113)
  • KC9105 (90)
  • KC9110 (126)
  • KC9120 (95)
  • KC9125 (105)
  • KC9125RR (1)
  • KC9140 (78)
  • KC9145 (76)
  • KC9210 (18)
  • KC9215 (78)
  • KC9225 (99)
  • KC9240 (100)
  • KC9240NEW (100)
  • KC9245 (78)
  • KC9315 (106)
  • KC9320 (119)
  • KC9325 (84)
  • KC935 (120)
  • KC950 (112)
  • KC990 (80)
  • KCD25 (29)
  • KCK05 (98)
  • KCK05B (90)
  • KCK15 (97)
  • KCK15B (103)
  • KCK20 (120)
  • KCK20B (121)
  • KCM15 (95)
  • KCM15B (88)
  • KCM25 (103)
  • KCM25B (97)
  • KCM35 (91)
  • KCM35B (67)
  • KCP05 (83)
  • KCP05B (59)
  • KCP10 (104)
  • KCP10B (130)
  • KCP15 (9)
  • KCP25 (105)
  • KCP25B (130)
  • KCP25C (106)
  • KCP30 (100)
  • KCP30B (81)
  • KCP40 (73)
  • KCP40B (89)
  • KCPK05 (88)
  • KCS10 (38)
  • KCS10B (103)
  • KCU10 (127)
  • KCU10B (99)
  • KCU25 (127)
  • KD050 (44)
  • KD081 (50)
  • KD100 (54)
  • KD120 (49)
  • KD1400 (42)
  • KD1405 (34)
  • KD1425 (57)
  • KM1 (25)
  • KMF (14)
  • KS15 (17)
  • KT1120 (15)
  • KT125 (49)
  • KT150 (29)
  • KT175 (71)
  • KT315 (92)
  • KT325 (51)
  • KT5020 (3)
  • KTP10 (21)
  • KU10 (13)
  • KU10T (88)
  • KU25T (27)
  • KU30T (116)
  • KY1310 (41)
  • KY1320 (68)
  • KY1540 (29)
  • KY1615 (69)
  • KY2000 (42)
  • KY2100 (23)
  • KY3000 (91)
  • KY3400 (55)
  • KY3500 (76)
  • KY4000 (31)
  • KY4300 (41)
  • KY4400 (67)
  • KYHK15B (67)
  • KYK10 (27)
  • KYK25 (47)
  • KYK35 (76)
  • KYS25 (29)
  • KYS30 (33)
  • MC2 (4)
  • NL200 (32)
  • NL250 (78)
  • NL300 (67)
  • NL400 (37)
  • NL920 (54)
  • P25 (26)
  • PB100 (16)
  • PB170 (18)
  • PB250 (20)
  • PB300 (14)
  • PD100 (6)
  • PD50 (6)
  • PN120 (1)
  • PS5 (34)
  • SP0819 (64)
  • SP0A00 (1)
  • SP0PW3 (4)
  • SP3019 (46)
  • SP4019 (50)
  • SP4036 (3)
  • SP4066 (5)
  • SP4093 (3)
  • SP61EJ (1)
  • SPADAP (14)
  • SPN4W2 (8)
  • SPSREJ (1)
  • THM (61)
  • THM-X (39)
  • THMF-X (15)
  • TN10P (103)
  • TN10U (65)
  • TN15M (92)
  • TN15U (61)
  • TN2000 (66)
  • TN20K (93)
  • TN20P (95)
  • TN30M (94)
  • TN30P (73)
  • TN4000 (60)
  • TN5015 (81)
  • TN5020 (84)
  • TN5105 (53)
  • TN5120 (94)
  • TN6010 (70)
  • TN6025 (76)
  • TN7005 (57)
  • TN7010 (93)
  • TN7015 (93)
  • TN7025 (93)
  • TN7035 (83)
  • TN7105 (56)
  • TN7110 (107)
  • TN7115 (94)
  • TN7125 (87)
  • TN7135 (85)
  • TN8025 (80)
  • TTI15 (47)
  • TTM09 (12)
  • TTR (22)
  • TTR-X (8)
  • TTS (48)
  • TTX (43)
  • W00342 (14)
  • WBH10C (59)
  • WBH10P (36)
  • WBH10U (41)
  • WBH20P (54)
  • WBH25P (37)
  • WBH25U (52)
  • WBH30P (36)
  • WBK40U (17)
  • WBK45U (46)
  • WDN00U (22)
  • WDN25U (42)
  • WK05CT (84)
  • WK15CT (53)
  • WK20CT (98)
  • WM15CT (95)
  • WM25CT (95)
  • WM35CT (78)
  • WP05CT (18)
  • WP15CT (100)
  • WP20TT (4)
  • WP25CT (100)
  • WP35CT (98)
  • WS10PT (83)
  • WS25PT (80)
  • WU05PT (6)
  • WU10HT (93)
  • WU10PT (67)
  • WU25PT (63)
  • X00511 (14)
  • X00580 (14)
  • X00581 (14)
  • X00582 (14)
  • X00583 (14)
  • X00584 (14)
  • X00585 (14)
  • X00586 (14)
  • X00591 (14)
  • X00592 (14)
  • X00593 (14)
  • X00594 (14)
  • X00596 (14)
  • X00597 (14)
  • X00599 (14)
Hand Of Tool
Hand Of Tool
  • L (43)
  • N (8)
  • R (47)
Wiper Insert
Wiper Insert
  • N (147)
  • Y (48)
F Dimension
F Dimension
  • 0.0 mm (6)
  • 5.0 mm (1)
  • 6.0 mm (1)
  • 13.0 mm (2)
  • 14.0 mm (2)
  • 17.0 mm (9)
  • 22.0 mm (15)
  • 27.0 mm (23)
  • 32.0 mm (1)
  • 35.0 mm (13)
  • 43.0 mm (2)
  • 45.0 mm (23)
F Dimension Min do F Dimension Max
F Dimension
F Dimension
  • 0.0 in (6)
  • 0.197 in (1)
  • 0.237 in (1)
  • 0.512 in (2)
  • 0.551 in (2)
  • 0.669 in (9)
  • 0.866 in (15)
  • 1.063 in (23)
  • 1.26 in (1)
  • 1.379 in (13)
  • 1.693 in (2)
  • 1.772 in (23)
F Dimension Min do F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (4)
  • 24.0 mm (1)
  • 24.5 mm (1)
  • 25.0 mm (2)
  • 32.0 mm (7)
  • 34.0 mm (2)
  • 38.5 mm (2)
  • 40.0 mm (13)
  • 41.301 mm (2)
  • 47.6 mm (2)
  • 48.0 mm (3)
  • 48.5 mm (2)
  • 50.0 mm (16)
  • 53.0 mm (1)
  • 57.2 mm (2)
  • 63.0 mm (5)
  • 81.0 mm (3)
  • 88.9 mm (2)
  • 90.0 mm (7)
  • 110.0 mm (31)
  • 125.0 mm (14)
  • 139.701 mm (2)
  • 174.601 mm (2)
  • 209.601 mm (2)
  • 215.0 mm (2)
  • 222.3 mm (2)
  • 510.0 mm (2)
  • 2000.0 mm (2)
Minimum Axial Groove Diameter Min