successfully added to cart
View Cart

Notifications

Mark all as read

Przecinanie

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1238)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1238)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1238)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1238)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1238)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1238)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1238)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1238)
  • M Stainless Steel (1166)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1166)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1166)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1166)
  • K Cast Iron (1191)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1191)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1182)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1170)
  • N Non-Ferrous Materials (1143)
    • N1
      Wrought Aluminum
      (1143)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1133)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (69)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1143)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1133)
    • N6
      Carbon, Graphite Composites, CFRP
      (1133)
    • N7
      MMC's
      (69)
  • S High-Temp Alloys (1174)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1174)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1174)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1174)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1161)
  • H Hardened Materials (674)
    • H1
      Hardened Materials 44-48 HRC
      (674)
    • H2
      Hardened Materials 48-55 HRC
      (616)
    • H3
      Hardened Materials 56-60 HRC
      (97)
    • H4
      Hardened Materials >60 HRC
      (97)
Select First Choice
  • BR (58)
  • CN (366)
  • DE (395)
  • GB (214)
  • IN (111)
  • SG (176)
  • US (471)
Applications
Applications
  • Boring Boring (379)
  • CRT Profiling CRT Profiling (2)
  • Cut-Off Cut-Off (707)
  • Deep Grooving Deep Grooving (72)
  • Face Grooving Face Grooving (458)
  • Facing Facing (26)
  • Grooving Grooving (920)
  • ID Grooving ID Grooving (425)
  • ID Thread Turning ID Thread Turning (39)
  • Multiple Direction Cutting Multiple Direction Cutting (219)
  • Plunge Turning Plunge Turning (473)
  • Profiling Profiling (185)
  • Turning Turning (185)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (930)
  • Lightly Interrupted Cut (969)
  • Smooth Cut (1189)
  • Varying Depth of Cut (1136)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (8)
  • 90.0 (524)
  • 92.25 (24)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Cutoff Support Blade A1-A3 (80)
  • Toolholder (439)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (715)
  • 2.0 (585)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (27)
  • 0.004 in (20)
  • 0.006 in (56)
  • 0.008 in (578)
  • 0.012 in (143)
  • 0.016 in (504)
  • 0.031 in (359)
  • 0.034 in (19)
  • 0.039 in (120)
  • 0.041 in (119)
  • 0.046 in (20)
  • 0.047 in (173)
  • 0.048 in (12)
  • 0.06 in (121)
  • 0.061 in (76)
  • 0.063 in (109)
  • 0.065 in (76)
  • 0.079 in (91)
  • 0.08 in (26)
  • 0.081 in (65)
  • 0.094 in (89)
  • 0.096 in (65)
  • 0.098 in (77)
  • 0.099 in (27)
  • 0.1 in (47)
  • 0.119 in (68)
  • 0.12 in (66)
  • 0.125 in (66)
  • 0.128 in (40)
  • 0.156 in (31)
  • 0.157 in (35)
  • 0.158 in (37)
  • 0.159 in (20)
  • 0.187 in (8)
  • 0.188 in (9)
  • 0.197 in (10)
  • 0.198 in (12)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (27)
  • 0.1 mm (20)
  • 0.151 mm (56)
  • 0.2 mm (578)
  • 0.301 mm (143)
  • 0.4 mm (504)
  • 0.8 mm (359)
  • 0.851 mm (19)
  • 1.0 mm (120)
  • 1.05 mm (119)
  • 1.175 mm (20)
  • 1.201 mm (173)
  • 1.225 mm (12)
  • 1.5 mm (113)
  • 1.526 mm (35)
  • 1.55 mm (76)
  • 1.6 mm (109)
  • 1.651 mm (76)
  • 2.0 mm (91)
  • 2.025 mm (26)
  • 2.051 mm (65)
  • 2.375 mm (89)
  • 2.45 mm (65)
  • 2.5 mm (77)
  • 2.526 mm (27)
  • 2.551 mm (47)
  • 3.0 mm (68)
  • 3.026 mm (26)
  • 3.051 mm (40)
  • 3.176 mm (66)
  • 3.25 mm (40)
  • 3.95 mm (20)
  • 3.975 mm (11)
  • 4.0 mm (35)
  • 4.025 mm (37)
  • 4.05 mm (20)
  • 4.75 mm (8)
  • 4.775 mm (9)
  • 5.0 mm (10)
  • 5.025 mm (12)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (771)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (771)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (366)
  • Lightly Interrupted Cut (405)
  • Smooth Cut (625)
  • Varying Depth of Cut (572)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K1025 (48)
  • K313 (512)
  • KB1630 (93)
  • KB5625 (84)
  • KBH20 (88)
  • KC5010 (190)
  • KC5025 (284)
  • KC9110 (132)
  • KC9125 (132)
  • KCK20 (108)
  • KCK20B (371)
  • KCM35B (322)
  • KCP10 (164)
  • KCP10B (371)
  • KCP25 (166)
  • KCP25B (371)
  • KCU10 (603)
  • KCU25 (854)
  • KD1405 (69)
  • KMF (31)
  • KMS (46)
  • KT315 (156)
  • KU10 (131)
  • KU30T (84)
  • KY3500 (114)
  • KYS30 (52)
  • SP88F8 (19)
Hand Of Tool
Hand Of Tool
  • L (231)
  • N (45)
  • N - Neutral (3)
  • R (240)
Wiper Insert
Wiper Insert
  • N (1227)
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.787 in (28)
  • 1.024 in (8)
  • 1.063 in (9)
  • 1.102 in (7)
  • 1.181 in (3)
  • 1.26 in (40)
  • 1.339 in (8)
  • 1.379 in (2)
  • 1.496 in (1)
  • 1.655 in (33)
  • 2.047 in (24)
  • 2.441 in (29)
  • 2.52 in (11)
  • 2.598 in (12)
  • 3.15 in (4)
  • 3.228 in (4)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 20.0 mm (28)
  • 26.0 mm (8)
  • 27.0 mm (9)
  • 28.0 mm (7)
  • 30.0 mm (3)
  • 32.0 mm (40)
  • 34.0 mm (8)
  • 35.0 mm (2)
  • 38.0 mm (1)
  • 42.0 mm (33)
  • 52.0 mm (24)
  • 62.0 mm (29)
  • 64.0 mm (11)
  • 66.0 mm (12)
  • 80.0 mm (4)
  • 82.0 mm (4)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (8)
  • E (511)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (31)
  • POSITIVE-ZERO (136)
frontEnd
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (87)
  • SQUARE SHANK ADAPTER (20)
Clamp Style
Clamp Style
  • C (54)
  • S (38)
  • Y (444)
Cutting Width
Cutting Width
  • 0.055 in (50)
  • 0.06 in (6)
  • 0.061 in (5)
  • 0.063 in (46)
  • 0.079 in (155)
  • 0.081 in (47)
  • 0.084 in (119)
  • 0.088 in (38)
  • 0.094 in (91)
  • 0.095 in (89)
  • 0.097 in (1)
  • 0.098 in (92)
  • 0.104 in (4)
  • 0.119 in (198)
  • 0.12 in (97)
  • 0.122 in (13)
  • 0.123 in (76)
  • 0.125 in (125)
  • 0.128 in (27)
  • 0.13 in (76)
  • 0.157 in (154)
  • 0.159 in (81)
  • 0.161 in (76)
  • 0.162 in (65)
  • 0.187 in (99)
  • 0.188 in (66)
  • 0.19 in (19)
  • 0.192 in (65)
  • 0.197 in (112)
  • 0.199 in (63)
  • 0.202 in (47)
  • 0.237 in (94)
  • 0.239 in (61)
  • 0.241 in (40)
  • 0.25 in (75)
  • 0.253 in (19)
  • 0.255 in (40)
  • 0.276 in (42)
  • 0.281 in (40)
  • 0.289 in (40)
  • 0.312 in (32)
  • 0.313 in (12)
  • 0.315 in (53)
  • 0.316 in (10)
  • 0.317 in (57)
  • 0.32 in (20)
  • 0.375 in (21)
  • 0.379 in (8)
  • 0.38 in (8)
  • 0.394 in (22)
  • 0.396 in (26)
  • 0.399 in (8)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.401 mm (50)
  • 1.5 mm (6)
  • 1.55 mm (5)
  • 1.6 mm (46)
  • 2.0 mm (155)
  • 2.051 mm (47)
  • 2.125 mm (119)
  • 2.2 mm (38)
  • 2.375 mm (91)
  • 2.401 mm (89)
  • 2.475 mm (1)
  • 2.5 mm (92)
  • 2.625 mm (4)
  • 3.0 mm (198)
  • 3.051 mm (97)
  • 3.1 mm (13)
  • 3.125 mm (76)
  • 3.176 mm (125)
  • 3.25 mm (27)
  • 3.301 mm (76)
  • 4.0 mm (154)
  • 4.05 mm (81)
  • 4.101 mm (76)
  • 4.125 mm (65)
  • 4.75 mm (99)
  • 4.775 mm (66)
  • 4.825 mm (19)
  • 4.875 mm (65)
  • 5.0 mm (112)
  • 5.051 mm (63)
  • 5.125 mm (47)
  • 6.0 mm (94)
  • 6.051 mm (61)
  • 6.125 mm (40)
  • 6.351 mm (75)
  • 6.426 mm (19)
  • 6.476 mm (40)
  • 7.0 mm (42)
  • 7.125 mm (40)
  • 7.325 mm (40)
  • 7.926 mm (32)
  • 7.95 mm (12)
  • 8.0 mm (53)
  • 8.025 mm (10)
  • 8.05 mm (57)
  • 8.125 mm (20)
  • 9.525 mm (21)
  • 9.625 mm (8)
  • 9.65 mm (8)
  • 10.0 mm (22)
  • 10.05 mm (26)
  • 10.125 mm (8)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • MCS - Modular Cartridge System (87)
  • VKT - Square Shank (20)
Insert Shape
Insert Shape
  • PRISMATIC (1290)
Cartridge Size
Cartridge Size
  • 50 (37)
  • 65 (17)
Front End Style
Front End Style
  • MCS01 Modular Deep Grooving (87)
  • VKT01 Std Design (20)
Insert Size
Insert Size
  • 10 (12)
  • 2 (67)
  • 3 (59)
  • 4 (65)
  • 5 (51)
  • 6 (48)
  • 8 (24)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.315 in (6)
  • 0.394 in (33)
  • 0.433 in (1)
  • 0.473 in (10)
  • 0.512 in (8)
  • 0.531 in (9)
  • 0.551 in (34)
  • 0.572 in (4)
  • 0.591 in (3)
  • 0.63 in (151)
  • 0.669 in (31)
  • 0.69 in (5)
  • 0.748 in (7)
  • 0.787 in (20)
  • 0.828 in (9)
  • 0.866 in (32)
  • 0.946 in (4)
  • 0.984 in (3)
  • 1.024 in (95)
  • 1.26 in (36)
  • 1.299 in (14)
  • 1.575 in (30)
  • 1.969 in (5)
  • 2.362 in (8)
  • 4.724 in (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 8.0 mm (6)
  • 10.0 mm (33)
  • 11.0 mm (1)
  • 12.0 mm (10)
  • 13.0 mm (8)
  • 13.5 mm (9)
  • 14.0 mm (34)
  • 14.5 mm (4)
  • 15.0 mm (3)
  • 16.0 mm (151)
  • 17.0 mm (31)
  • 17.5 mm (5)
  • 19.0 mm (7)
  • 20.0 mm (20)
  • 21.0 mm (9)
  • 22.0 mm (32)
  • 24.0 mm (4)
  • 25.0 mm (3)
  • 26.0 mm (95)
  • 32.0 mm (36)
  • 33.0 mm (14)
  • 40.0 mm (30)
  • 50.0 mm (5)
  • 60.0 mm (8)
  • 120.0 mm (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 6 in (8)
  • 7 in (4)
  • 0.866 in (12)
  • 1.102 in (2)
  • 1.299 in (2)
  • 1.496 in (2)
  • 1.693 in (2)
  • 1.85 in (6)
  • 1.891 in (6)
  • 1.929 in (4)
  • 2.106 in (4)
  • 2.185 in (2)
  • 2.244 in (8)
  • 2.283 in (8)
  • 2.303 in (7)
  • 2.382 in (2)
  • 2.5 in (14)
  • 2.579 in (2)
  • 2.618 in (4)
  • 2.697 in (4)
  • 2.894 in (4)
  • 3.426 in (2)
  • 3.484 in (2)
  • 5.439 in (3)
  • 5.463 in (4)
  • 5.482 in (4)
  • 5.508 in (12)
  • 5.529 in (10)
  • 5.533 in (7)
  • 5.906 in (4)
  • 6.226 in (2)
  • 6.25 in (4)
  • 6.271 in (4)
  • 6.534 in (2)
  • 6.694 in (3)
Gage Length
Gage Length
  • 22 mm (12)
  • 57 mm (8)
  • 58 mm (8)
  • 47 mm (6)
  • 48 mm (6)
  • 150 mm (4)
  • 49 mm (4)
  • 170 mm (3)
  • 28 mm (2)
  • 33 mm (2)
  • 38 mm (2)
  • 43 mm (2)
  • 87 mm (2)
  • 53.5 mm (4)
  • 55.5 mm (2)
  • 58.5 mm (7)
  • 60.5 mm (2)
  • 63.5 mm (14)
  • 65.5 mm (2)
  • 66.5 mm (4)
  • 68.5 mm (4)
  • 73.5 mm (4)
  • 88.5 mm (2)
  • 138.15 mm (3)
  • 138.75 mm (4)
  • 139.25 mm (4)
  • 139.9 mm (12)
  • 140.4 mm (10)
  • 140.55 mm (7)
  • 152.4 mm (8)
  • 158.15 mm (2)
  • 158.75 mm (4)
  • 159.25 mm (4)
  • 165.951 mm (2)
  • 177.8 mm (4)
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
  • 1.651 mm (5)
  • 1.75 mm (4)
  • 1.901 mm (7)
  • 2.0 mm (25)
  • 2.475 mm (5)
  • 2.5 mm (2)
  • 2.575 mm (6)
  • 2.725 mm (4)
  • 2.901 mm (9)
  • 3.0 mm (12)
  • 3.301 mm (6)
  • 3.401 mm (47)
  • 3.45 mm (6)
  • 3.5 mm (31)
  • 3.526 mm (4)
  • 3.6 mm (3)
  • 3.801 mm (5)
  • 4.075 mm (5)
  • 4.101 mm (7)
  • 4.15 mm (6)
  • 4.2 mm (37)
  • 4.4 mm (6)
  • 4.5 mm (12)
  • 4.601 mm (1)
  • 4.75 mm (6)
  • 4.801 mm (5)
  • 4.9 mm (37)
  • 5.0 mm (1)
  • 5.301 mm (4)
  • 5.9 mm (6)
  • 6.0 mm (14)
  • 6.101 mm (4)
  • 6.25 mm (2)
  • 6.275 mm (1)
  • 6.351 mm (1)
  • 6.4 mm (17)
  • 6.5 mm (6)
  • 7.301 mm (1)
  • 7.95 mm (3)
  • 8.1 mm (9)
  • 8.201 mm (3)
Maximum Cutting Insert Depth Min to Maximum Cutting Insert Depth Max
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
  • 0.065 in (5)
  • 0.069 in (4)
  • 0.075 in (7)
  • 0.079 in (25)
  • 0.097 in (5)
  • 0.098 in (2)
  • 0.101 in (6)
  • 0.107 in (4)
  • 0.114 in (9)
  • 0.119 in (12)
  • 0.13 in (6)
  • 0.134 in (47)
  • 0.136 in (6)
  • 0.138 in (31)
  • 0.139 in (4)
  • 0.143 in (3)
  • 0.15 in (5)
  • 0.16 in (5)
  • 0.161 in (7)
  • 0.163 in (6)
  • 0.165 in (37)
  • 0.174 in (6)
  • 0.177 in (12)
  • 0.181 in (1)
  • 0.187 in (6)
  • 0.189 in (5)
  • 0.193 in (37)
  • 0.197 in (1)
  • 0.209 in (4)
  • 0.232 in (6)
  • 0.237 in (14)
  • 0.24 in (4)
  • 0.246 in (2)
  • 0.247 in (1)
  • 0.25 in (1)
  • 0.252 in (17)
  • 0.256 in (6)
  • 0.288 in (1)
  • 0.313 in (3)
  • 0.319 in (9)
  • 0.323 in (3)
Maximum Cutting Insert Depth Min to Maximum Cutting Insert Depth Max
insertGeometry
Shape
Shape
  • PRISMATIC (717)
Insert Seat Size
Insert Seat Size
  • 1 (22)
  • 10 (29)
  • 1B (22)
  • 2 (87)
  • 2B (11)
  • 2S (7)
  • 3 (155)
  • 3S (12)
  • 4 (131)
  • 4S (7)
  • 5 (80)
  • 5S (8)
  • 6 (93)
  • 8 (53)
Cutting Tool Material
Cutting Tool Material
  • B H (93)
  • B L (88)
  • C N (118)
  • D P (69)
  • H T (156)
  • H W (1234)
backEnd
Connection Type
Connection Type
  • CUTOFF BLADE (77)
  • Cutoff Blade (3)
  • SQUARE SHANK (439)
System Size
System Size
  • KM40TS (4)
  • KM4X100 (4)
  • KM4X63 (8)
  • KM50TS (8)
  • KM63TS (8)
  • KM63XMZ (11)
  • KM80ATC (8)
  • KM80TS (8)
  • PSC40 (4)
  • PSC50 (8)
  • PSC63 (8)
  • PSC80 (8)
  • VDI30 (10)
  • VDI40 (10)
No filters matching ""