Product Suggestions

Product Family suggestions

successfully added to cart
View Cart

Notifications

Mark all as read

Obróbka rowków czołowych

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (2661)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2661)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2661)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2661)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2661)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2661)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2661)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2661)
  • M Stainless Steel (2228)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2228)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2228)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2228)
  • K Cast Iron (2644)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2644)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2624)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2612)
  • N Non-Ferrous Materials (2420)
    • N1
      Wrought Aluminum
      (2412)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2220)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (270)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (2420)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (2228)
    • N6
      Carbon, Graphite Composites, CFRP
      (2220)
    • N7
      MMC's
      (262)
  • S High-Temp Alloys (2428)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2428)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2428)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2428)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2404)
  • H Hardened Materials (1453)
    • H1
      Hardened Materials 44-48 HRC
      (1453)
    • H2
      Hardened Materials 48-55 HRC
      (1208)
    • H3
      Hardened Materials 56-60 HRC
      (216)
    • H4
      Hardened Materials >60 HRC
      (216)
Select First Choice
  • BR (46)
  • CN (228)
  • DE (226)
  • GB (145)
  • IN (125)
  • SG (154)
  • US (229)
Applications
Applications
  • Back Boring Back Boring (143)
  • Boring Boring (1466)
  • Cut-Off Cut-Off (530)
  • Deep Grooving Deep Grooving (34)
  • Drilling Drilling (1)
  • Face Grooving Face Grooving (3112)
  • Facing Facing (275)
  • Grooving Grooving (3001)
  • ID Facing ID Facing (283)
  • ID Grooving ID Grooving (2246)
  • ID Thread Turning ID Thread Turning (108)
  • Multiple Direction Cutting Multiple Direction Cutting (233)
  • OD Thread Turning OD Thread Turning (127)
  • Plunge Turning Plunge Turning (2159)
  • Profiling Profiling (215)
  • Threading Threading (130)
  • Turning Turning (1396)
Cutting Length
Cutting Length
  • 26.0 mm (1)
  • 32.0 mm (3)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 1.024 in (1)
  • 1.26 in (3)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • 60 (187)
  • ACME (122)
  • API (114)
  • API RD (86)
  • BSW (78)
  • BUTTRESS (182)
  • M (114)
  • NPT (78)
  • STUB ACME (78)
  • UN (182)
  • UNJ (78)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (2207)
  • Lightly Interrupted Cut (2344)
  • Smooth Cut (2813)
  • Varying Depth of Cut (2647)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (12)
  • 90.0 (785)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (6)
  • Boring Bar Shank (90)
  • Toolholder (361)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (1105)
  • 2.0 (2104)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (78)
  • 0.003 in (192)
  • 0.004 in (298)
  • 0.005 in (78)
  • 0.006 in (120)
  • 0.007 in (201)
  • 0.008 in (1462)
  • 0.01 in (178)
  • 0.011 in (78)
  • 0.012 in (289)
  • 0.014 in (201)
  • 0.016 in (871)
  • 0.017 in (78)
  • 0.019 in (114)
  • 0.02 in (157)
  • 0.023 in (317)
  • 0.03 in (70)
  • 0.031 in (790)
  • 0.033 in (13)
  • 0.034 in (19)
  • 0.035 in (114)
  • 0.039 in (201)
  • 0.041 in (35)
  • 0.046 in (10)
  • 0.047 in (289)
  • 0.048 in (8)
  • 0.049 in (147)
  • 0.06 in (345)
  • 0.061 in (141)
  • 0.062 in (92)
  • 0.063 in (427)
  • 0.065 in (139)
  • 0.069 in (147)
  • 0.078 in (93)
  • 0.079 in (254)
  • 0.08 in (26)
  • 0.081 in (116)
  • 0.089 in (114)
  • 0.094 in (137)
  • 0.095 in (159)
  • 0.096 in (115)
  • 0.098 in (189)
  • 0.099 in (23)
  • 0.1 in (131)
  • 0.119 in (114)
  • 0.12 in (118)
  • 0.125 in (183)
  • 0.128 in (94)
  • 0.156 in (22)
  • 0.157 in (22)
  • 0.158 in (26)
  • 0.159 in (17)
  • 0.187 in (4)
  • 0.188 in (5)
  • 0.197 in (6)
  • 0.198 in (8)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (78)
  • 0.076 mm (192)
  • 0.1 mm (298)
  • 0.125 mm (78)
  • 0.151 mm (120)
  • 0.176 mm (201)
  • 0.2 mm (1462)
  • 0.225 mm (78)
  • 0.25 mm (178)
  • 0.275 mm (78)
  • 0.301 mm (289)
  • 0.325 mm (201)
  • 0.351 mm (114)
  • 0.4 mm (871)
  • 0.426 mm (78)
  • 0.45 mm (114)
  • 0.476 mm (40)
  • 0.5 mm (157)
  • 0.576 mm (317)
  • 0.75 mm (70)
  • 0.775 mm (209)
  • 0.8 mm (581)
  • 0.826 mm (13)
  • 0.851 mm (19)
  • 0.9 mm (114)
  • 1.0 mm (201)
  • 1.05 mm (35)
  • 1.175 mm (10)
  • 1.201 mm (289)
  • 1.225 mm (8)
  • 1.25 mm (147)
  • 1.5 mm (337)
  • 1.526 mm (37)
  • 1.55 mm (141)
  • 1.576 mm (92)
  • 1.6 mm (427)
  • 1.651 mm (139)
  • 1.75 mm (147)
  • 1.975 mm (93)
  • 2.0 mm (254)
  • 2.025 mm (26)
  • 2.051 mm (116)
  • 2.25 mm (114)
  • 2.375 mm (137)
  • 2.401 mm (159)
  • 2.45 mm (115)
  • 2.5 mm (189)
  • 2.526 mm (23)
  • 2.551 mm (131)
  • 3.0 mm (114)
  • 3.026 mm (20)
  • 3.051 mm (98)
  • 3.176 mm (183)
  • 3.25 mm (94)
  • 3.95 mm (15)
  • 3.975 mm (7)
  • 4.0 mm (22)
  • 4.025 mm (26)
  • 4.05 mm (17)
  • 4.75 mm (4)
  • 4.775 mm (5)
  • 5.0 mm (6)
  • 5.025 mm (8)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (2830)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (2830)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (1410)
  • Lightly Interrupted Cut (1547)
  • Smooth Cut (2016)
  • Varying Depth of Cut (1850)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K1 (5)
  • K1025 (38)
  • K2885 (146)
  • K313 (837)
  • K420 (216)
  • K4H (110)
  • K68 (303)
  • KB1345 (114)
  • KB1630 (210)
  • KB5625 (154)
  • KBH20 (122)
  • KC250 (151)
  • KC5010 (533)
  • KC5025 (567)
  • KC5410 (186)
  • KC710 (182)
  • KC720 (213)
  • KC722 (182)
  • KC730 (417)
  • KC732 (78)
  • KC810 (198)
  • KC850 (340)
  • KC910 (110)
  • KC9110 (288)
  • KC9120 (78)
  • KC9125 (106)
  • KC9320 (182)
  • KC935 (182)
  • KC950 (182)
  • KCK20 (244)
  • KCK20B (702)
  • KCM35B (365)
  • KCP10 (139)
  • KCP10B (764)
  • KCP25 (140)
  • KCP25B (820)
  • KCU10 (1195)
  • KCU25 (1315)
  • KD050 (40)
  • KD081 (78)
  • KD100 (97)
  • KD120 (114)
  • KD1405 (67)
  • KD1425 (86)
  • KMS (44)
  • KT175 (146)
  • KT315 (294)
  • KU10 (106)
  • KU10T (182)
  • KU25T (182)
  • KU30T (258)
  • KY3000 (114)
  • KY3500 (98)
  • KYS30 (38)
  • SP88F8 (13)
Hand Of Tool
Hand Of Tool
  • L (207)
  • N (9)
  • R (241)
Wiper Insert
Wiper Insert
  • N (3021)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (147)
  • 11.175 mm (2)
  • 11.5 mm (2)
  • 16.0 mm (4)
  • 17.0 mm (3)
  • 18.5 mm (2)
  • 18.55 mm (4)
  • 20.0 mm (5)
  • 20.326 mm (1)
  • 21.0 mm (3)
  • 22.0 mm (3)
  • 25.0 mm (10)
  • 25.401 mm (4)
  • 26.0 mm (11)
  • 28.576 mm (4)
  • 30.0 mm (8)
  • 33.0 mm (4)
  • 34.0 mm (4)
  • 34.926 mm (6)
  • 35.0 mm (8)
  • 36.0 mm (5)
  • 38.0 mm (1)
  • 38.1 mm (4)
  • 40.0 mm (17)
  • 41.0 mm (4)
  • 41.301 mm (57)
  • 42.0 mm (5)
  • 44.0 mm (2)
  • 44.45 mm (2)
  • 47.6 mm (56)
  • 48.0 mm (3)
  • 50.0 mm (34)
  • 50.801 mm (2)
  • 52.0 mm (3)
  • 54.0 mm (4)
  • 55.875 mm (3)
  • 56.625 mm (49)
  • 57.151 mm (6)
  • 57.2 mm (29)
  • 58.0 mm (4)
  • 60.0 mm (56)
  • 60.325 mm (4)
  • 63.5 mm (22)
  • 64.0 mm (4)
  • 68.0 mm (4)
  • 69.851 mm (4)
  • 70.0 mm (8)
  • 75.0 mm (59)
  • 76.2 mm (8)
  • 80.0 mm (11)
  • 82.551 mm (4)
  • 88.9 mm (535)
  • 90.0 mm (8)
  • 92.0 mm (3)
  • 100.0 mm (72)
  • 120.0 mm (11)
  • 127.0 mm (1)
  • 130.0 mm (4)
  • 132.0 mm (4)
  • 139.701 mm (728)
  • 146.05 mm (3)
  • 174.601 mm (125)
  • 180.0 mm (72)
  • 184.0 mm (3)
  • 200.0 mm (8)
  • 209.601 mm (236)
  • 222.3 mm (58)
  • 250.0 mm (72)
  • 290.0 mm (7)
  • 333.0 mm (4)
  • 350.0 mm (66)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (147)
  • 0.44 in (2)
  • 0.453 in (2)
  • 0.63 in (4)
  • 0.669 in (3)
  • 0.728 in (2)
  • 0.73 in (4)
  • 0.787 in (5)
  • 0.8 in (1)
  • 0.828 in (3)
  • 0.866 in (3)
  • 0.984 in (10)
  • 1.0 in (4)
  • 1.024 in (11)
  • 1.125 in (4)
  • 1.181 in (8)
  • 1.299 in (4)
  • 1.339 in (4)
  • 1.375 in (6)
  • 1.379 in (8)
  • 1.417 in (5)
  • 1.496 in (1)
  • 1.5 in (4)
  • 1.575 in (17)
  • 1.614 in (4)
  • 1.627 in (57)
  • 1.655 in (5)
  • 1.732 in (2)
  • 1.75 in (2)
  • 1.874 in (56)
  • 1.891 in (3)
  • 1.969 in (34)
  • 2.0 in (2)
  • 2.047 in (3)
  • 2.126 in (4)
  • 2.2 in (3)
  • 2.229 in (49)
  • 2.25 in (6)
  • 2.253 in (29)
  • 2.283 in (4)
  • 2.362 in (56)
  • 2.375 in (4)
  • 2.5 in (22)
  • 2.52 in (4)
  • 2.677 in (4)
  • 2.75 in (4)
  • 2.757 in (8)
  • 2.953 in (59)
  • 3.0 in (8)
  • 3.15 in (11)
  • 3.25 in (4)
  • 3.5 in (535)
  • 3.543 in (8)
  • 3.622 in (3)
  • 3.938 in (72)
  • 4.724 in (11)
  • 5.0 in (1)
  • 5.118 in (4)
  • 5.197 in (4)
  • 5.5 in (728)
  • 5.75 in (3)
  • 6.875 in (125)
  • 7.087 in (72)
  • 7.244 in (3)
  • 7.875 in (8)
  • 8.252 in (236)
  • 8.752 in (58)
  • 9.843 in (72)
  • 11.417 in (7)
  • 13.11 in (4)
  • 13.781 in (66)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.787 in (4)
  • 0.828 in (3)
  • 0.906 in (1)
  • 0.984 in (5)
  • 1.024 in (2)
  • 1.181 in (4)
  • 1.379 in (10)
  • 1.417 in (13)
  • 1.575 in (8)
  • 1.655 in (4)
  • 1.811 in (1)
  • 1.891 in (4)
  • 1.969 in (21)
  • 2.126 in (2)
  • 2.283 in (4)
  • 2.362 in (31)
  • 2.52 in (3)
  • 2.835 in (3)
  • 2.914 in (3)
  • 2.953 in (50)
  • 3.307 in (4)
  • 3.701 in (4)
  • 3.938 in (67)
  • 4.409 in (4)
  • 4.882 in (3)
  • 5.354 in (4)
  • 5.906 in (3)
  • 6.299 in (4)
  • 7.087 in (73)
  • 7.875 in (2)
  • 8.346 in (3)
  • 9.843 in (68)
  • 10.0 in (4)
  • 11.811 in (11)
  • 13.781 in (66)
  • 39.331 in (81)
  • 393.661 in (1824)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 20.0 mm (4)
  • 21.0 mm (3)
  • 23.0 mm (1)
  • 25.0 mm (5)
  • 26.0 mm (2)
  • 30.0 mm (4)
  • 35.0 mm (10)
  • 36.0 mm (13)
  • 40.0 mm (8)
  • 42.0 mm (4)
  • 46.0 mm (1)
  • 48.0 mm (4)
  • 50.0 mm (21)
  • 54.0 mm (2)
  • 58.0 mm (4)
  • 60.0 mm (31)
  • 64.0 mm (3)
  • 72.0 mm (3)
  • 74.0 mm (3)
  • 75.0 mm (50)
  • 84.0 mm (4)
  • 94.0 mm (4)
  • 100.0 mm (67)
  • 112.0 mm (4)
  • 124.0 mm (3)
  • 136.0 mm (4)
  • 150.0 mm (3)
  • 160.0 mm (4)
  • 180.0 mm (73)
  • 200.0 mm (2)
  • 212.0 mm (3)
  • 250.0 mm (68)
  • 254.0 mm (4)
  • 300.0 mm (11)
  • 350.0 mm (66)
  • 999.0 mm (81)
  • 9999.0 mm (1824)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Countersunk Angle
Countersunk Angle
  • 20.0 (3)
  • 45.0 (7)
Countersunk Angle Min to Countersunk Angle Max
Cutting Direction
Cutting Direction
  • E (376)
  • S (81)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (236)
  • NEUTRAL (ZERO) (168)
Maximum Bore Depth
Maximum Bore Depth
  • 1.0 in (10)
  • 1.23 in (1)
  • 1.232 in (1)
  • 1.291 in (1)
  • 1.5 in (1)
  • 1.891 in (2)
  • 2.0 in (25)
  • 2.499 in (1)
  • 2.5 in (3)
  • 2.52 in (4)
  • 3.0 in (5)
  • 3.15 in (4)
  • 3.75 in (2)
  • 3.781 in (1)
  • 3.938 in (11)
  • 4.0 in (12)
  • 4.5 in (2)
  • 5.0 in (5)
  • 5.039 in (4)
  • 6.0 in (8)
  • 6.299 in (6)
  • 7.0 in (3)
  • 7.875 in (1)
  • 8.0 in (8)
  • 9.0 in (1)
  • 10.0 in (7)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 25.401 mm (10)
  • 31.25 mm (1)
  • 31.3 mm (1)
  • 32.801 mm (1)
  • 38.1 mm (1)
  • 48.0 mm (2)
  • 50.801 mm (25)
  • 63.475 mm (1)
  • 63.5 mm (3)
  • 64.0 mm (4)
  • 76.2 mm (5)
  • 80.0 mm (4)
  • 95.25 mm (2)
  • 96.0 mm (1)
  • 100.0 mm (11)
  • 101.601 mm (12)
  • 114.301 mm (2)
  • 127.0 mm (5)
  • 128.0 mm (4)
  • 152.4 mm (8)
  • 160.0 mm (6)
  • 177.8 mm (3)
  • 200.0 mm (1)
  • 203.201 mm (8)
  • 228.601 mm (1)
  • 254.0 mm (7)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (9)
  • S (87)
frontEnd
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (79)
  • SQUARE SHANK ADAPTER (20)
Clamp Style
Clamp Style
  • N (197)
  • Y (435)