successfully added to cart
View Cart

Notifications

Mark all as read

Obróbka skrawaniem powierzchni zewnętrznych

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1826)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1815)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1815)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1815)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1815)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1815)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1826)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1826)
  • M Stainless Steel (1821)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1821)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1821)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1821)
  • K Cast Iron (1891)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1891)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1885)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1867)
  • N Non-Ferrous Materials (1773)
    • N1
      Wrought Aluminum
      (1712)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1701)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (873)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1757)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1695)
    • N6
      Carbon, Graphite Composites, CFRP
      (1454)
    • N7
      MMC's
      (1695)
  • S High-Temp Alloys (1894)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1883)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1889)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1886)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1810)
  • H Hardened Materials (1566)
    • H1
      Hardened Materials 44-48 HRC
      (1566)
    • H2
      Hardened Materials 48-55 HRC
      (1557)
    • H3
      Hardened Materials 56-60 HRC
      (1557)
    • H4
      Hardened Materials >60 HRC
      (1170)
Select First Choice
  • CN (110)
  • DE (108)
  • GB (54)
  • IN (2)
  • SG (15)
  • US (136)
Applications
Applications
  • Chamfer Turning Chamfer Turning (49)
  • Facing Facing (1223)
  • ID Facing ID Facing (2)
  • Multiple Direction Cutting Multiple Direction Cutting (1288)
  • Plunge Turning Plunge Turning (55)
  • Profiling Profiling (1168)
  • TRN Boring TRN Boring (342)
  • Turning Turning (1781)
Type of Thread
Type of Thread
  • 60 (1)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1827)
  • Interrupted (1015)
  • Lightly Interrupted Cut (1856)
  • Smooth Cut (1871)
  • Varying Depth of Cut (1847)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (198)
  • 48.0 (8)
  • 49.783 (2)
  • 50.0 (24)
  • 60.0 (16)
  • 62.5 (27)
  • 63.0 (19)
  • 72.5 (25)
  • 75.0 (291)
  • 85.0 (7)
  • 90.0 (351)
  • 91.0 (1)
  • 93.0 (448)
  • 95.0 (392)
  • 97.5 (1)
  • 105.0 (1)
  • 107.5 (90)
  • 117.5 (14)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (264)
  • Toolholder (1323)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (5)
  • 1.0 (1079)
  • 2.0 (1077)
  • 3.0 (306)
  • 4.0 (1171)
  • 6.0 (270)
  • 8.0 (738)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (55)
  • 0.001 in (102)
  • 0.002 in (272)
  • 0.004 in (985)
  • 0.008 in (938)
  • 0.014 in (123)
  • 0.016 in (1464)
  • 0.024 in (63)
  • 0.028 in (19)
  • 0.031 in (1722)
  • 0.047 in (1579)
  • 0.062 in (165)
  • 0.063 in (1214)
  • 0.078 in (7)
  • 0.079 in (7)
  • 0.094 in (196)
  • 0.095 in (598)
  • 0.119 in (13)
  • 0.125 in (110)
  • 0.126 in (263)
  • 0.157 in (71)
  • 0.187 in (13)
  • 0.188 in (48)
  • 0.189 in (3)
  • 0.197 in (77)
  • 0.237 in (80)
  • 0.25 in (92)
  • 0.313 in (16)
  • 0.315 in (5)
  • 0.375 in (20)
  • 0.394 in (4)
  • 0.492 in (6)
  • 0.5 in (15)
  • 0.63 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (55)
  • 0.025 mm (102)
  • 0.05 mm (272)
  • 0.1 mm (985)
  • 0.2 mm (938)
  • 0.351 mm (123)
  • 0.4 mm (1464)
  • 0.601 mm (63)
  • 0.701 mm (19)
  • 0.8 mm (1722)
  • 1.201 mm (1579)
  • 1.576 mm (165)
  • 1.6 mm (1214)
  • 1.975 mm (7)
  • 2.0 mm (7)
  • 2.375 mm (196)
  • 2.401 mm (598)
  • 3.0 mm (13)
  • 3.176 mm (110)
  • 3.2 mm (263)
  • 4.0 mm (71)
  • 4.75 mm (13)
  • 4.775 mm (48)
  • 4.801 mm (3)
  • 5.0 mm (77)
  • 6.0 mm (80)
  • 6.351 mm (92)
  • 7.95 mm (16)
  • 8.0 mm (5)
  • 9.525 mm (20)
  • 10.0 mm (4)
  • 12.5 mm (6)
  • 12.701 mm (15)
  • 16.0 mm (2)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (953)
  • CM2 (907)
  • CM3 (798)
  • CPX (890)
  • K090 (1229)
  • K10M (1310)
  • K10P (1156)
  • K10U (1116)
  • K15U (1091)
  • K20K (1313)
  • K25M (1111)
  • K25P (1140)
  • K313 (1706)
  • K420 (994)
  • K68 (1580)
  • KB1610 (848)
  • KB9610 (998)
  • KBH10 (987)
  • KBH20 (1006)
  • KC5010 (1765)
  • KC5025 (1568)
  • KC5410 (1418)
  • KC5510 (1174)
  • KC720 (1248)
  • KC730 (1547)
  • KC7310 (1259)
  • KC732 (1210)
  • KC8050 (1769)
  • KC810 (1662)
  • KC850 (1756)
  • KC9010 (1401)
  • KC9025 (1696)
  • KC910 (1620)
  • KC9105 (1445)
  • KC9110 (1738)
  • KC9120 (1517)
  • KC9125 (1673)
  • KC9140 (1267)
  • KC9145 (1065)
  • KC9215 (1178)
  • KC9225 (1541)
  • KC9240 (1622)
  • KC9240NEW (1615)
  • KC9245 (1181)
  • KC9315 (1705)
  • KC9320 (1563)
  • KC9325 (1423)
  • KC935 (1675)
  • KC950 (1529)
  • KC990 (1572)
  • KCK05 (1543)
  • KCK05B (1337)
  • KCK15 (1492)
  • KCK15B (1573)
  • KCK20 (1601)
  • KCK20B (1605)
  • KCM15 (1507)
  • KCM15B (1377)
  • KCM25 (1602)
  • KCM25B (1531)
  • KCM35 (1380)
  • KCM35B (1001)
  • KCP05 (1324)
  • KCP05B (918)
  • KCP10 (1646)
  • KCP10B (1648)
  • KCP25 (1692)
  • KCP25B (1717)
  • KCP30 (1649)
  • KCP30B (1136)
  • KCP40 (1033)
  • KCP40B (1118)
  • KCPK05 (1088)
  • KCS10B (1396)
  • KCU10 (1736)
  • KCU25 (1560)
  • KD050 (815)
  • KD081 (786)
  • KD1425 (830)
  • KT125 (880)
  • KT175 (1107)
  • KT315 (1276)
  • KU10T (1233)
  • KU30T (1564)
  • KY1310 (788)
  • KY1320 (1099)
  • KY1615 (1180)
  • KY3000 (1150)
  • KY3400 (968)
  • KY3500 (1229)
  • KY4400 (1110)
  • KYHK15B (1151)
  • KYK25 (896)
  • KYK35 (1189)
  • NL250 (1159)
  • NL300 (877)
  • NL920 (987)
  • SP0819 (839)
  • SP3019 (926)
  • SP4019 (816)
Hand Of Tool
Hand Of Tool
  • L (638)
  • N (209)
  • R (741)
Wiper Insert
Wiper Insert
  • N (1903)
  • Y (1024)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 16.0 mm (1)
  • 40.0 mm (4)
  • 44.0 mm (12)
  • 50.0 mm (32)
  • 54.0 mm (30)
  • 60.0 mm (2)
  • 63.0 mm (16)
  • 70.0 mm (38)
  • 74.0 mm (4)
  • 80.0 mm (51)
  • 86.0 mm (68)
  • 90.0 mm (6)
  • 94.0 mm (2)
  • 100.0 mm (37)
  • 104.0 mm (2)
  • 106.0 mm (31)
  • 118.0 mm (2)
  • 120.0 mm (2)
  • 130.0 mm (2)
  • 150.0 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.63 in (1)
  • 1.575 in (4)
  • 1.732 in (12)
  • 1.969 in (32)
  • 2.126 in (30)
  • 2.362 in (2)
  • 2.48 in (16)
  • 2.757 in (38)
  • 2.914 in (4)
  • 3.15 in (51)
  • 3.386 in (68)
  • 3.543 in (6)
  • 3.701 in (2)
  • 3.938 in (37)
  • 4.094 in (2)
  • 4.173 in (31)
  • 4.646 in (2)
  • 4.724 in (2)
  • 5.118 in (2)
  • 5.906 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (293)
  • E (233)
  • S (1062)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (867)
  • DOUBLE POSITIVE (36)
  • NEGATIVE-ZERO (156)
  • NEUTRAL (ZERO) (397)
  • POSITIVE-ZERO (65)
Maximum Bore Depth
Maximum Bore Depth
  • 1.379 in (20)
  • 1.575 in (65)
  • 1.772 in (16)
  • 1.891 in (1)
  • 1.969 in (90)
  • 2.165 in (1)
  • 2.362 in (103)
  • 2.757 in (39)
  • 4.529 in (8)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 35.0 mm (20)
  • 40.0 mm (65)
  • 45.0 mm (16)
  • 48.0 mm (1)
  • 50.0 mm (90)
  • 55.0 mm (1)
  • 60.0 mm (103)
  • 70.0 mm (39)
  • 115.0 mm (8)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (13)
frontEnd
Clamp Style
Clamp Style
  • C (166)
  • D (264)
  • M (712)
  • N (35)
  • P (307)
  • S (408)
  • W (8)
  • X (15)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (495)
  • D-DIAMOND/RHOMBIC 55 (385)
  • E-DIAMOND/RHOMBIC 75 (1)
  • R-ROUND (161)
  • S-SQUARE 90 (321)
  • T-TRIANGLE 60 (261)
  • V-DIAMOND/RHOMBIC 35 (192)
  • W-TRIGON 80 (99)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.25 in (3)
  • 0.276 in (3)
  • 0.309 in (2)
  • 0.315 in (2)
  • 0.4 in (2)
  • 0.411 in (1)
  • 0.43 in (2)
  • 0.465 in (2)
  • 0.473 in (1)
  • 0.478 in (2)
  • 0.501 in (2)
  • 0.625 in (1)
  • 0.63 in (5)
  • 0.748 in (1)
  • 0.75 in (4)
  • 0.787 in (4)
  • 0.81 in (3)
  • 0.946 in (2)
  • 0.984 in (4)
  • 1.0 in (15)
  • 1.02 in (4)
  • 1.131 in (1)
  • 1.143 in (1)
  • 1.25 in (3)
  • 1.26 in (1)
  • 1.299 in (2)
  • 1.381 in (5)
  • 1.496 in (2)
  • 1.5 in (4)
  • 1.581 in (2)
  • 1.863 in (1)
  • 1.875 in (2)
  • 2.323 in (1)
  • 2.364 in (1)
  • 2.374 in (1)
  • 3.071 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 6.351 mm (3)
  • 7.0 mm (3)
  • 7.851 mm (2)
  • 8.0 mm (2)
  • 10.15 mm (2)
  • 10.425 mm (1)
  • 10.925 mm (2)
  • 11.8 mm (2)
  • 12.0 mm (1)
  • 12.125 mm (2)
  • 12.726 mm (2)
  • 15.875 mm (1)
  • 16.0 mm (5)
  • 19.0 mm (1)
  • 19.05 mm (4)
  • 20.0 mm (4)
  • 20.576 mm (3)
  • 24.0 mm (2)
  • 25.0 mm (4)
  • 25.401 mm (15)
  • 25.901 mm (4)
  • 28.701 mm (1)
  • 29.0 mm (1)
  • 31.75 mm (3)
  • 32.0 mm (1)
  • 33.0 mm (2)
  • 35.051 mm (5)
  • 38.0 mm (2)
  • 38.1 mm (4)
  • 40.151 mm (2)
  • 47.325 mm (1)
  • 47.625 mm (2)
  • 59.0 mm (1)
  • 60.051 mm (1)
  • 60.301 mm (1)
  • 78.0 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (1211)
  • B L (1144)
  • C A (1354)
  • C N (1302)
  • D P (998)
  • H T (1396)
  • H W (1843)
backEnd
Connection Type
Connection Type
  • SQUARE SHANK (1323)
  • TAPER SHANK (264)
System Size
System Size
  • KM32 (15)
  • KM32TS (6)
  • KM40TS (67)
  • KM50TS (57)
  • KM63TS (79)
  • KM63UT (1)
  • KM80TS (39)
Back-End Diameter
Back-End Diameter
  • 12.0 mm (1)
  • 32.0 mm (41)
  • 40.0 mm (148)
  • 50.0 mm (150)
  • 63.0 mm (186)
  • 80.0 mm (66)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.473 in (1)
  • 1.26 in (41)
  • 1.575 in (148)
  • 1.969 in (150)
  • 2.48 in (186)
  • 3.15 in (66)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Oprawki z chwytem gwintowanym

Płytki z chwytem gwintowanym
(1 Products)
  • TurningTurning
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [FA] F A Dimension [FA] F A Dimension Gage Insert Shim Screw ID Drive Size Insert Screw ID Drive Size
1097867 SSBCR2525M12 SSBCR2525M12   25.0000 .9843 25.0000 .9843 22.0000 .8661 150.0000 5.905 21.0000 .8268 3.0610 .1205 SC..120408 4 mm T15
    List price:
    $108.23 /each.
    Your price::
    Qty
    List price:
    Discount: %
    Your price::
    Replacement This item is no longer available
    Replacement Product Please contact customer service for assistance
    Qty

    Sold in pkg. of

    ORIGINAL PRODUCT

    Oprawki z chwytem gwintowanym

    Płytki z chwytem gwintowanym
    (3 Products)
    • TurningTurning
    • ProfilingProfiling
    View Products
    SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert Shim Screw ID Drive Size Insert Screw ID Drive Size
    1098005 SSDCN1212N09 SSDCN1212N09   12.0000 .4724 12.0000 .4724 6.0000 .2362 160.0000 6.299 18.0000 .7087 SC..09T308   T15
      List price:
      $91.87 /each.
      Your price::
      Qty
      1098006 SSDCN1616H09 SSDCN1616H09   16.0000 .6299 16.0000 .6299 8.0000 .3150 100.0000 3.937 18.0000 .7087 SC..09T308 3.5 mm T15
        List price:
        $99.10 /each.
        Your price::
        Qty
        1098007 SSDCN2020K09 SSDCN2020K09   20.0000 .7874 20.0000 .7874 10.0000 .3937 125.0000 4.921 18.0000 .7087 SC..09T308 3.5 mm T15
          List price:
          $103.78 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is no longer available
          Replacement Product Please contact customer service for assistance
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          Oprawki KENCLAMP

          Płytki KENLOC
          (23 Products)
          • TurningTurning
          • ProfilingProfiling
          • FacingFacing
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [B3] Head Back Offset [B3] Head Back Offset Gage Insert Lock Pin ID Drive Size Shim Screw ID Drive Size Clamp Screw ID Drive Size
          1875135 DCLNL164CKC3 DCLNL164CKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 31.7500 1.250     CN..432 15 IP 15 IP 15 IP
            List price:
            $112.53 /each.
            Your price::
            Qty
            1875133 DCLNL164DKC3 DCLNL164DKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 31.7500 1.250     CN..432 15 IP 15 IP 15 IP
              List price:
              $113.82 /each.
              Your price::
              Qty
              1875137 DCLNR124BKC3 DCLNR124BKC3   19.0500 .7500 19.0500 .7500 25.4000 1.000 114.3000 4.500 31.7500 1.250 3.8100 .1500 CN..432 15 IP 15 IP 15 IP
                List price:
                $107.19 /each.
                Your price::
                Qty
                1875134 DCLNR164CKC3 DCLNR164CKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 31.7500 1.250     CN..432 15 IP 15 IP 15 IP
                  List price:
                  $113.41 /each.
                  Your price::
                  Qty
                  1874862 DCLNR164DKC3 DCLNR164DKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 31.7500 1.250     CN..432 15 IP 15 IP 15 IP
                    List price:
                    $113.62 /each.
                    Your price::
                    Qty
                    1875141 DCLNR204DKC3 DCLNR204DKC3   31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 31.7500 1.250     CN..432 15 IP 15 IP 15 IP
                      List price:
                      $128.96 /each.
                      Your price::
                      Qty
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is no longer available
                      Replacement Product Please contact customer service for assistance
                      Qty

                      Sold in pkg. of

                      ORIGINAL PRODUCT

                      Oprawki KENCLAMP

                      Płytki KENLOC
                      (14 Products)
                      • TurningTurning
                      • ProfilingProfiling
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert Lock Pin ID Drive Size Shim Screw ID Drive Size Clamp Screw ID Drive Size
                      1875149 DDJNL164CKC3 DDJNL164CKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 31.7500 1.250 DN..432 15 IP 15 IP 15 IP
                        List price:
                        $166.11 /each.
                        Your price::
                        Qty
                        1875139 DDJNL164DKC3 DDJNL164DKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 31.7500 1.250 DN..432 15 IP 15 IP 15 IP
                          List price:
                          $166.11 /each.
                          Your price::
                          Qty
                          1875151 DDJNL204DKC3 DDJNL204DKC3   31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 31.7500 1.250 DN..432 15 IP 15 IP 15 IP
                            List price:
                            $176.30 /each.
                            Your price::
                            Qty
                            1875140 DDJNR164CKC3 DDJNR164CKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 127.0000 5.000 31.7500 1.250 DN..432 15 IP 15 IP 15 IP
                              List price:
                              $164.57 /each.
                              Your price::
                              Qty
                              1875136 DDJNR164DKC3 DDJNR164DKC3   25.4000 1.000 25.4000 1.000 31.7500 1.250 152.4000 6.000 31.7500 1.250 DN..432 15 IP 15 IP 15 IP
                                List price:
                                $166.11 /each.
                                Your price::
                                Qty
                                1875148 DDJNR204DKC3 DDJNR204DKC3   31.7500 1.250 31.7500 1.250 38.1000 1.500 152.4000 6.000 31.7500 1.250 DN..432 15 IP 15 IP 15 IP
                                  List price:
                                  $176.77 /each.
                                  Your price::
                                  Qty
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is no longer available
                                  Replacement Product Please contact customer service for assistance
                                  Qty

                                  Sold in pkg. of

                                  ORIGINAL PRODUCT

                                  Oprawki z chwytem gwintowanym

                                  Płytki z chwytem gwintowanym
                                  (1 Products)
                                  • TurningTurning
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [FA] F A Dimension [FA] F A Dimension Gage Insert Insert Screw ID Drive Size
                                  1097828 SCRCR1212N09 SCRCR1212N09   12.0000 .4724 12.0000 .4724 13.0000 .5118 160.0000 6.299 14.0000 .5512 2.2710 .0894 CC..09T308 T15
                                    List price:
                                    $91.87 /each.
                                    Your price::
                                    Qty