Product Suggestions

Product Family suggestions

successfully added to cart
View Cart

Notifications

Mark all as read

Obróbka skrawaniem powierzchni wewnętrznych

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1375)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1374)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1374)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1374)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1374)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1374)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1375)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1375)
  • M Stainless Steel (1375)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1375)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1375)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1375)
  • K Cast Iron (1371)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1371)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1369)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1369)
  • N Non-Ferrous Materials (1297)
    • N1
      Wrought Aluminum
      (1287)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1286)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1042)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1296)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1286)
    • N6
      Carbon, Graphite Composites, CFRP
      (1192)
    • N7
      MMC's
      (1286)
  • S High-Temp Alloys (1383)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1381)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1381)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1381)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1374)
  • H Hardened Materials (1143)
    • H1
      Hardened Materials 44-48 HRC
      (1143)
    • H2
      Hardened Materials 48-55 HRC
      (1136)
    • H3
      Hardened Materials 56-60 HRC
      (1136)
    • H4
      Hardened Materials >60 HRC
      (1012)
Select First Choice
  • BR (2)
  • CN (78)
  • DE (75)
  • GB (39)
  • IN (1)
  • SG (9)
  • US (71)
Applications
Applications
  • Back Boring Back Boring (87)
  • CRT Profiling CRT Profiling (55)
  • Chamfer Turning Chamfer Turning (82)
  • Facing Facing (271)
  • ID Facing ID Facing (197)
  • ID Grooving ID Grooving (11)
  • ID Thread Turning ID Thread Turning (12)
  • Multiple Direction Cutting Multiple Direction Cutting (1116)
  • Profiling Profiling (882)
  • TRN Boring TRN Boring (1029)
  • Threading Threading (1)
  • Turning Turning (189)
Type of Thread
Type of Thread
  • 55 (6)
  • 60 (16)
  • ACME (17)
  • API (13)
  • API BUTTRESS (2)
  • API RD (13)
  • BSPT (4)
  • BSW (14)
  • BUTTRESS (10)
  • M (14)
  • NPT (12)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (14)
  • TR DIN 103 (6)
  • UN (14)
  • UNJ (12)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1240)
  • Interrupted (566)
  • Lightly Interrupted Cut (1350)
  • Smooth Cut (1366)
  • Stable (4)
  • Unstable (4)
  • Varying Depth of Cut (1342)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (21)
  • 60.0 (14)
  • 62.5 (13)
  • 75.0 (48)
  • 85.0 (7)
  • 90.0 (247)
  • 90.25 (10)
  • 91.0 (2)
  • 93.0 (315)
  • 95.0 (659)
  • 97.0 (8)
  • 107.5 (50)
  • 140.0 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (206)
  • Boring Bar Shank (850)
  • KM (220)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (977)
  • 2.0 (902)
  • 3.0 (314)
  • 4.0 (653)
  • 6.0 (122)
  • 8.0 (286)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (28)
  • 0.001 in (54)
  • 0.002 in (271)
  • 0.003 in (14)
  • 0.004 in (919)
  • 0.005 in (8)
  • 0.006 in (14)
  • 0.007 in (112)
  • 0.008 in (1037)
  • 0.01 in (10)
  • 0.011 in (8)
  • 0.012 in (10)
  • 0.014 in (48)
  • 0.015 in (102)
  • 0.016 in (1215)
  • 0.017 in (10)
  • 0.019 in (10)
  • 0.02 in (8)
  • 0.021 in (1)
  • 0.023 in (10)
  • 0.024 in (58)
  • 0.027 in (1)
  • 0.028 in (9)
  • 0.031 in (1244)
  • 0.033 in (1)
  • 0.035 in (10)
  • 0.037 in (2)
  • 0.039 in (13)
  • 0.047 in (925)
  • 0.049 in (8)
  • 0.06 in (8)
  • 0.062 in (203)
  • 0.063 in (618)
  • 0.069 in (8)
  • 0.078 in (8)
  • 0.079 in (10)
  • 0.089 in (10)
  • 0.094 in (138)
  • 0.095 in (162)
  • 0.098 in (2)
  • 0.119 in (1)
  • 0.125 in (18)
  • 0.126 in (70)
  • 0.157 in (6)
  • 0.197 in (1)
  • 0.25 in (3)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (28)
  • 0.025 mm (54)
  • 0.05 mm (271)
  • 0.076 mm (14)
  • 0.1 mm (919)
  • 0.125 mm (8)
  • 0.151 mm (14)
  • 0.176 mm (112)
  • 0.2 mm (1037)
  • 0.225 mm (8)
  • 0.25 mm (10)
  • 0.275 mm (8)
  • 0.301 mm (10)
  • 0.325 mm (10)
  • 0.351 mm (48)
  • 0.375 mm (102)
  • 0.4 mm (1215)
  • 0.426 mm (10)
  • 0.45 mm (10)
  • 0.476 mm (3)
  • 0.5 mm (8)
  • 0.525 mm (1)
  • 0.576 mm (10)
  • 0.601 mm (58)
  • 0.65 mm (1)
  • 0.701 mm (9)
  • 0.775 mm (28)
  • 0.8 mm (1216)
  • 0.826 mm (1)
  • 0.9 mm (10)
  • 0.925 mm (2)
  • 1.0 mm (13)
  • 1.201 mm (925)
  • 1.25 mm (8)
  • 1.5 mm (8)
  • 1.576 mm (203)
  • 1.6 mm (618)
  • 1.75 mm (8)
  • 1.975 mm (8)
  • 2.0 mm (10)
  • 2.25 mm (10)
  • 2.375 mm (138)
  • 2.401 mm (162)
  • 2.5 mm (2)
  • 3.0 mm (1)
  • 3.176 mm (18)
  • 3.2 mm (70)
  • 4.0 mm (6)
  • 5.0 mm (1)
  • 6.351 mm (3)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (120)
  • 0.65 mm (1)
  • 0.701 mm (1)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (120)
  • 0.027 in (1)
  • 0.028 in (1)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K090 (577)
  • K10M (731)
  • K10P (666)
  • K10U (673)
  • K15U (664)
  • K20K (699)
  • K25M (658)
  • K25P (599)
  • K313 (1276)
  • K420 (592)
  • K68 (1104)
  • KB1610 (801)
  • KB1630 (600)
  • KB5610 (721)
  • KB5625 (703)
  • KB5630 (550)
  • KB9610 (859)
  • KBH10 (621)
  • KBH20 (705)
  • KC250 (572)
  • KC5010 (1367)
  • KC5025 (1297)
  • KC5410 (1064)
  • KC5510 (612)
  • KC720 (1065)
  • KC730 (1318)
  • KC7310 (769)
  • KC732 (1050)
  • KC8050 (1192)
  • KC810 (1179)
  • KC850 (1236)
  • KC9010 (1033)
  • KC9025 (1227)
  • KC910 (1159)
  • KC9105 (1058)
  • KC9110 (1225)
  • KC9120 (1040)
  • KC9125 (1171)
  • KC9140 (643)
  • KC9215 (630)
  • KC9225 (1155)
  • KC9240 (1135)
  • KC9240NEW (1124)
  • KC9245 (622)
  • KC9315 (1201)
  • KC9320 (1093)
  • KC9325 (994)
  • KC935 (1330)
  • KC950 (1064)
  • KC990 (1131)
  • KCD25 (582)
  • KCK05 (1149)
  • KCK05B (764)
  • KCK15 (1022)
  • KCK15B (1094)
  • KCK20 (1143)
  • KCK20B (1110)
  • KCM15 (1125)
  • KCM15B (932)
  • KCM25 (1159)
  • KCM25B (1052)
  • KCM35 (863)
  • KCP05 (1085)
  • KCP05B (561)
  • KCP10 (1171)
  • KCP10B (1179)
  • KCP25 (1186)
  • KCP25B (1206)
  • KCP30 (1075)
  • KCP30B (588)
  • KCP40 (548)
  • KCP40B (576)
  • KCPK05 (641)
  • KCS10 (740)
  • KCS10B (1031)
  • KCU10 (1321)
  • KCU25 (1253)
  • KD050 (714)
  • KD081 (624)
  • KD100 (740)
  • KD120 (646)
  • KD1400 (960)
  • KD1405 (609)
  • KD1425 (1009)
  • KT125 (653)
  • KT150 (583)
  • KT175 (930)
  • KT315 (1209)
  • KTP10 (572)
  • KU10T (1035)
  • KU30T (1073)
  • KY1320 (568)
  • KY1615 (572)
  • KY3500 (602)
  • KY4400 (598)
  • KYHK15B (617)
  • KYK35 (597)
  • NL250 (593)
  • NL920 (568)
  • SP4019 (601)
Hand Of Tool
Hand Of Tool
  • L (490)
  • R (786)
Wiper Insert
Wiper Insert
  • N (1263)
  • Y (794)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 4.575 mm (8)
  • 5.176 mm (8)
  • 5.275 mm (5)
  • 5.551 mm (3)
  • 5.7 mm (4)
  • 5.775 mm (3)
  • 5.801 mm (5)
  • 5.851 mm (1)
  • 5.95 mm (9)
  • 6.0 mm (1)
  • 6.176 mm (1)
  • 6.2 mm (1)
  • 6.601 mm (2)
  • 6.775 mm (3)
  • 6.9 mm (1)
  • 6.976 mm (3)
  • 7.051 mm (1)
  • 7.075 mm (1)
  • 7.101 mm (8)
  • 7.25 mm (14)
  • 7.426 mm (4)
  • 7.5 mm (1)
  • 7.525 mm (5)
  • 7.601 mm (1)
  • 7.625 mm (2)
  • 8.15 mm (3)
  • 8.8 mm (4)
  • 9.05 mm (6)
  • 9.1 mm (5)
  • 9.15 mm (3)
  • 9.201 mm (1)
  • 10.5 mm (1)
  • 10.55 mm (12)
  • 10.951 mm (1)
  • 11.0 mm (14)
  • 11.125 mm (1)
  • 12.201 mm (30)
  • 12.451 mm (1)
  • 12.9 mm (2)
  • 13.0 mm (31)
  • 13.675 mm (1)
  • 14.3 mm (1)
  • 15.25 mm (43)
  • 16.0 mm (47)
  • 16.5 mm (1)
  • 18.55 mm (10)
  • 19.55 mm (43)
  • 20.0 mm (58)
  • 21.375 mm (1)
  • 21.6 mm (10)
  • 23.625 mm (41)
  • 24.901 mm (16)
  • 25.0 mm (70)
  • 25.401 mm (2)
  • 26.151 mm (1)
  • 26.925 mm (1)
  • 27.0 mm (2)
  • 30.225 mm (3)
  • 30.475 mm (43)
  • 31.0 mm (10)
  • 32.0 mm (131)
  • 32.676 mm (2)
  • 33.0 mm (2)
  • 33.025 mm (22)
  • 33.275 mm (1)
  • 37.0 mm (3)
  • 37.35 mm (22)
  • 37.4 mm (3)
  • 39.375 mm (3)
  • 40.0 mm (135)
  • 41.276 mm (2)
  • 43.0 mm (1)
  • 43.301 mm (26)
  • 44.7 mm (37)
  • 44.95 mm (1)
  • 45.0 mm (2)
  • 45.975 mm (1)
  • 47.625 mm (2)
  • 48.0 mm (1)
  • 50.0 mm (135)
  • 50.801 mm (32)
  • 51.051 mm (13)
  • 52.0 mm (2)
  • 53.975 mm (3)
  • 55.0 mm (6)
  • 57.151 mm (6)
  • 59.0 mm (2)
  • 60.0 mm (14)
  • 60.95 mm (34)
  • 63.0 mm (64)
  • 63.5 mm (14)
  • 65.0 mm (1)
  • 65.825 mm (4)
  • 67.3 mm (2)
  • 70.0 mm (15)
  • 76.95 mm (26)
  • 82.551 mm (10)
  • 100.0 mm (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.18 in (8)
  • 0.205 in (8)
  • 0.209 in (5)
  • 0.219 in (3)
  • 0.224 in (4)
  • 0.227 in (3)
  • 0.228 in (5)
  • 0.23 in (1)
  • 0.234 in (9)
  • 0.237 in (1)
  • 0.243 in (1)
  • 0.244 in (1)
  • 0.26 in (2)
  • 0.267 in (3)
  • 0.272 in (1)
  • 0.275 in (3)
  • 0.278 in (1)
  • 0.279 in (1)
  • 0.28 in (8)
  • 0.286 in (14)
  • 0.292 in (4)
  • 0.295 in (1)
  • 0.296 in (5)
  • 0.299 in (1)
  • 0.3 in (2)
  • 0.321 in (3)
  • 0.347 in (4)
  • 0.356 in (6)
  • 0.358 in (5)
  • 0.36 in (3)
  • 0.362 in (1)
  • 0.414 in (1)
  • 0.416 in (12)
  • 0.431 in (1)
  • 0.433 in (14)
  • 0.438 in (1)
  • 0.48 in (30)
  • 0.49 in (1)
  • 0.508 in (2)
  • 0.512 in (31)
  • 0.538 in (1)
  • 0.564 in (1)
  • 0.6 in (43)
  • 0.63 in (47)
  • 0.65 in (1)
  • 0.73 in (10)
  • 0.77 in (43)
  • 0.787 in (58)
  • 0.842 in (1)
  • 0.85 in (10)
  • 0.93 in (41)
  • 0.98 in (16)
  • 0.984 in (70)
  • 1.0 in (2)
  • 1.03 in (1)
  • 1.06 in (1)
  • 1.063 in (2)
  • 1.19 in (3)
  • 1.2 in (43)
  • 1.22 in (10)
  • 1.26 in (131)
  • 1.286 in (2)
  • 1.299 in (2)
  • 1.3 in (22)
  • 1.31 in (1)
  • 1.457 in (3)
  • 1.47 in (22)
  • 1.472 in (3)
  • 1.55 in (3)
  • 1.575 in (135)
  • 1.625 in (2)
  • 1.693 in (1)
  • 1.705 in (26)
  • 1.76 in (37)
  • 1.77 in (1)
  • 1.772 in (2)
  • 1.81 in (1)
  • 1.875 in (2)
  • 1.891 in (1)
  • 1.969 in (135)
  • 2.0 in (32)
  • 2.011 in (13)
  • 2.047 in (2)
  • 2.125 in (3)
  • 2.165 in (6)
  • 2.25 in (6)
  • 2.323 in (2)
  • 2.362 in (14)
  • 2.4 in (34)
  • 2.48 in (64)
  • 2.5 in (14)
  • 2.559 in (1)
  • 2.592 in (4)
  • 2.65 in (2)
  • 2.757 in (15)
  • 3.031 in (26)
  • 3.25 in (10)
  • 3.938 in (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (10)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (10)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (624)
  • E (604)
  • P (19)
  • S (20)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (589)
  • DOUBLE POSITIVE (3)
  • NEGATIVE-ZERO (384)
  • NEUTRAL (ZERO) (123)
  • POSITIVE-NEGATIVE (37)
  • POSITIVE-ZERO (140)
Maximum Bore Depth
Maximum Bore Depth
  • 0.484 in (1)
  • 0.5 in (7)
  • 0.63 in (2)
  • 0.75 in (7)
  • 0.787 in (2)
  • 0.875 in (3)
  • 0.935 in (3)
  • 0.946 in (6)
  • 0.982 in (1)
  • 0.984 in (1)
  • 1.0 in (16)
  • 1.018 in (1)
  • 1.122 in (1)
  • 1.124 in (3)
  • 1.125 in (6)
  • 1.181 in (5)
  • 1.25 in (10)
  • 1.26 in (14)
  • 1.379 in (2)
  • 1.385 in (3)
  • 1.417 in (9)
  • 1.498 in (3)
  • 1.499 in (13)
  • 1.5 in (17)
  • 1.508 in (3)
  • 1.563 in (2)
  • 1.575 in (17)
  • 1.661 in (6)
  • 1.701 in (2)
  • 1.873 in (5)
  • 1.875 in (16)
  • 1.891 in (31)
  • 1.907 in (2)
  • 1.938 in (2)
  • 1.969 in (5)
  • 1.986 in (2)
  • 2.0 in (29)
  • 2.169 in (11)
  • 2.205 in (2)
  • 2.209 in (6)
  • 2.249 in (2)
  • 2.25 in (12)
  • 2.283 in (4)
  • 2.362 in (21)
  • 2.382 in (4)
  • 2.444 in (3)
  • 2.499 in (11)
  • 2.5 in (30)
  • 2.52 in (31)
  • 2.757 in (9)
  • 2.775 in (4)
  • 2.835 in (8)
  • 2.953 in (2)
  • 2.955 in (11)
  • 2.993 in (6)
  • 3.0 in (48)
  • 3.037 in (4)
  • 3.044 in (8)
  • 3.124 in (2)
  • 3.125 in (6)
  • 3.15 in (39)
  • 3.152 in (2)
  • 3.2 in (4)
  • 3.434 in (6)
  • 3.473 in (8)
  • 3.476 in (2)
  • 3.485 in (2)
  • 3.593 in (2)
  • 3.594 in (2)
  • 3.749 in (2)
  • 3.75 in (18)
  • 3.781 in (12)
  • 3.789 in (7)
  • 3.938 in (76)
  • 4.0 in (55)
  • 4.11 in (4)
  • 4.412 in (10)
  • 4.418 in (2)
  • 4.5 in (18)
  • 4.612 in (10)
  • 4.724 in (5)
  • 4.738 in (10)
  • 4.992 in (13)
  • 5.0 in (27)
  • 5.039 in (69)
  • 5.284 in (2)
  • 5.513 in (2)
  • 5.883 in (8)
  • 6.0 in (65)
  • 6.299 in (68)
  • 6.992 in (5)
  • 7.0 in (8)
  • 7.875 in (50)
  • 8.0 in (41)
  • 10.0 in (40)
  • 12.5 in (18)
  • 15.0 in (22)
  • 17.5 in (6)
  • 20.0 in (16)
  • 25.0 in (8)
Maximum Bore Depth Min