Sending to SolidCAM in progress...

Downloaded file will be available after import in the SolidCAM tool library.

Oprawki A4 do przecinania
Oprawki A4 do przecinania
Oprawki A4 do przecinania
Oprawki A4 do przecinania
Select the files you wish to request
Downloads
Request {{cadTool}} format
{{cadTool}} format is not available

A4SC

Oprawki A4 do przecinania

Metryczne
Calowe
SAP Material Number 2981102
ISO Catalog Number A4SCL080113
ANSI Catalog Number A4SCL080113
Insert Size 1.5
[CD] Cutting Depth 13.5 mm
[CD] Cutting Depth .5315 in
[W] Groove Width 1.5 mm
[W] Groove Width .0591 in
[WM] Minimum Groove Width 1.5 mm
[WM] Minimum Groove Width .0591 in
[DMAX] Maximum Bore Diameter 27 mm
[DMAX] Maximum Bore Diameter 1.063 in
[H] Shank Height 12.7 mm
[H] Shank Height .5 in
[H1] Cutting Height 12.7 mm
[H1] Cutting Height .5 in
[H2] Head Height 20.88 mm
[H2] Head Height .822 in
[H3]Head Bottom Offset 3.18 mm
[H3]Head Bottom Offset .1252 in
[B] Shank Width 12.7 mm
[B] Shank Width .5 in
[L1] Tool Length 114.3 mm
[L1] Tool Length 4.5 in
[F] F Dimension 12.74 mm
[F] F Dimension .5016 in
[FS] Secondary F Dimension 11.993 mm
[FS] Secondary F Dimension .472 in
[LH] Head Length 25 mm
[LH] Head Length .98 in
Clamp Screw ID Drive Size T15
Zobacz wszystkie warianty produktów

Zastosowania

  • Cut-OffCut-Off
  • O.D. Deep GroovingO.D. Deep Grooving
  • TurningTurning
  • ProfilingProfiling
  • FacingFacing
  • ChamferingChamfering
  • GroovingGrooving

Strona maszyny

ładowanie...

Strona przedmiotu obrabianego

ładowanie...
Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?