Sending to SolidCAM in progress...

Downloaded file will be available after import in the SolidCAM tool library.

Grooving, and Cut-Off • Square Shank
Grooving, and Cut-Off • Square Shank
Grooving, and Cut-Off • Square Shank
Grooving, and Cut-Off • Square Shank
Grooving, and Cut-Off • Square Shank
Grooving, and Cut-Off • Square Shank
Select the files you wish to request
Downloads SDS
Request {{cadTool}} format
{{cadTool}} format is not available

Beyond™ Evolution™ • Integral Toolholder • Reinforced • Front Clamp • Through Coolant • Inch

Grooving, and Cut-Off • Square Shank

Metryczne
Calowe
SAP Material Number 6180127
ISO Catalog Number EVSCFR080310C
ANSI Catalog Number EVSCFR080310C
Insert Size 3
[CD] Cutting Depth 10 mm
[CD] Cutting Depth .394 in
[DMAX] Maximum Bore Diameter 20 mm
[DMAX] Maximum Bore Diameter .787 in
[H1] Cutting Height 12.7 mm
[H1] Cutting Height .5 in
[B] Shank Width 12.71 mm
[B] Shank Width .5 in
[H2] Head Height 17.45 mm
[H2] Head Height .687 in
[L1] Tool Length 114.3 mm
[L1] Tool Length 4.5 in
[FS] Secondary F Dimension 11.2 mm
[FS] Secondary F Dimension .441 in
[LH] Head Length 21.5 mm
[LH] Head Length .846 in
[CS] Coolant Supply Size M8X1
Clamp Screw ID Drive Size T15
Zobacz wszystkie warianty produktów

Zastosowania

  • Through Coolant: GroovingThrough Coolant: Grooving
  • Cut-OffCut-Off
  • TurningTurning
  • ProfilingProfiling
  • FacingFacing
  • ChamferingChamfering
  • GroovingGrooving

Materiały przedmiotu obrabianego

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials

Strona maszyny

ładowanie...

Strona przedmiotu obrabianego

ładowanie...

Dimensions • Beyond Evolution Integral Holders

Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?