Sending to SolidCAM in progress...

Downloaded file will be available after import in the SolidCAM tool library.

Korpusy wiertła Drill FIX DFR
Korpusy wiertła Drill FIX DFR
Korpusy wiertła Drill FIX DFR
Korpusy wiertła Drill FIX DFR
Select the files you wish to request
Downloads
Request {{cadTool}} format
{{cadTool}} format is not available

Chwyt 4xD SSF DFR

Korpusy wiertła Drill FIX DFR

Metryczne
Calowe
SAP Material Number 3022351
ISO Catalog Number DFR0875R4SSF100
ANSI Catalog Number DFR0875R4SSF100
[D] Adapter / Shank / Bore Diameter 25.4 mm
[D] Adapter / Shank / Bore Diameter 1 in
[D1] Drill Diameter M 22.225 mm
[D1] Drill Diameter M .875 in
[D1MAX] Drill Diameter Maximum 23.226 mm
[D1MAX] Drill Diameter Maximum .9144 in
[L1] Insert Gage Length 117.235 mm
[L1] Insert Gage Length 4.615 in
[L4] Maximum Drilling Depth 88.9 mm
[L4] Maximum Drilling Depth 3.5 in
[L5] Drill Point Length 0.755 mm
[L5] Drill Point Length .0297 in
[LS] Shank Length 76.2 mm
[LS] Shank Length 3 in
Gage Insert DFR0403.
Zobacz wszystkie warianty produktów

Zastosowania

  • DrillingDrilling
  • Drilling: Inclined EntryDrilling: Inclined Entry
  • Drilling: Inclined ExitDrilling: Inclined Exit
  • Drilling: X-OffsetDrilling: X-Offset
  • Drilling: ConvexDrilling: Convex
  • Shank - Cylindrical with Flat and FlangeShank - Cylindrical with Flat and Flange
  • Through Coolant: Radial: Indexable DrillingThrough Coolant: Radial: Indexable Drilling
  • Drilling: BlindDrilling: Blind
  • Chain DrillingChain Drilling
  • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
  • Drilling:  Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
  • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

Materiały przedmiotu obrabianego

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys

Właściwości i zalety



  • Drill Fix DFR with rectangular-shaped inserts offer highest stability and feed rates at smaller sizes.

  • X-offset design to adjust diameter size on turning machines and optimize tolerances on machining centers.

  • Drill shipped with insert screws, side pipe plug, and Torx wrench.

Strona maszyny

ładowanie...

Strona przedmiotu obrabianego

ładowanie...

OSTRZEŻENIE • Drill Fix DFR

Dimensions • Chwyt stożkowy DFR

Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?