Sending to SolidCAM in progress...

Downloaded file will be available after import in the SolidCAM tool library.

Korpusy Drill Fix™ DFSP™
Korpusy Drill Fix™ DFSP™
Korpusy Drill Fix™ DFSP™
Korpusy Drill Fix™ DFSP™
Select the files you wish to request
Downloads SDS
Request {{cadTool}} format
{{cadTool}} format is not available

Chwyt DFSP Weldon • DIN 1835-1, kształt B • 2 x D

Korpusy Drill Fix™ DFSP™

Metryczne
Calowe
SAP Material Number 6075496
ISO Catalog Number DFSP195R2WB25M
ANSI Catalog Number DFSP195R2WB25M
[D] Adapter / Shank / Bore Diameter 25 mm
[D] Adapter / Shank / Bore Diameter .984 in
[D1] Drill Diameter M 19.5 mm
[D1] Drill Diameter M .768 in
[D1MAX] Drill Diameter Maximum 20.5 mm
[D1MAX] Drill Diameter Maximum .8071 in
[L1] Insert Gage Length 68 mm
[L1] Insert Gage Length 2.677 in
[L4] Maximum Drilling Depth 39 mm
[L4] Maximum Drilling Depth 1.535 in
[L5] Drill Point Length 0.6 mm
[L5] Drill Point Length .024 in
[LS] Shank Length 56 mm
[LS] Shank Length 2.205 in
Gage Insert SPGX0603.
Gage Insert 2 DFT0303.
Zobacz wszystkie warianty produktów

Zastosowania

  • DrillingDrilling
  • Drilling: Inclined EntryDrilling: Inclined Entry
  • Drilling: Inclined ExitDrilling: Inclined Exit
  • Drilling: X-OffsetDrilling: X-Offset
  • Shank - Cylindrical with FlatShank - Cylindrical with Flat
  • Drilling: ConvexDrilling: Convex
  • Drilling - Through CoolantDrilling - Through Coolant
  • Drilling: BlindDrilling: Blind
  • Chain DrillingChain Drilling
  • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
  • Drilling:  Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
  • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

Materiały przedmiotu obrabianego

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials

Właściwości i zalety

  • Wiertło DFSP stanowi połączenie ekonomicznej, kwadratowej płytki zewnętrznej i znakomitych właściwości centrujących wewnętrznej płytki trygonalnej.

  • Korpus wiertła dostarczany jest ze śrubami mocującymi płytki, korkiem bocznym i kluczem Torx.

  • Płytki do DFSP należy zamawiać oddzielnie. Informacje na temat płytek można znaleźć na stronach J89–J90.

Strona maszyny

ładowanie...

Strona przedmiotu obrabianego

ładowanie...

OSTRZEŻENIE • Drill Fix DFR

Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?