Sending to SolidCAM in progress...

Downloaded file will be available after import in the SolidCAM tool library.

Korpusy Drill Fix™ DFSP™
Korpusy Drill Fix™ DFSP™
Korpusy Drill Fix™ DFSP™
Korpusy Drill Fix™ DFSP™
Select the files you wish to request
Downloads
Request {{cadTool}} format
{{cadTool}} format is not available

Chwyt DFSP Whistle Notch WD • 4 x D

Korpusy Drill Fix™ DFSP™

Metryczne
Calowe
SAP Material Number 5692317
ISO Catalog Number DFSP550R4WD50M
ANSI Catalog Number DFSP550R4WD50M
[D] Adapter / Shank / Bore Diameter 50 mm
[D] Adapter / Shank / Bore Diameter 1.968 in
[D1] Drill Diameter M 54.999 mm
[D1] Drill Diameter M 2.165 in
[D1MAX] Drill Diameter Maximum 55.999 mm
[D1MAX] Drill Diameter Maximum 2.204 in
[L1] Insert Gage Length 268 mm
[L1] Insert Gage Length 10.551 in
[L4] Maximum Drilling Depth 220 mm
[L4] Maximum Drilling Depth 8.661 in
[L5] Drill Point Length 1.75 mm
[L5] Drill Point Length .0689 in
[LS] Shank Length 68 mm
[LS] Shank Length 2.677 in
[CS] Coolant Supply Size R1/4
Gage Insert SPPX15T5.
Gage Insert 2 DFT0905.
Zobacz wszystkie warianty produktów

Zastosowania

  • DrillingDrilling
  • Drilling: Inclined EntryDrilling: Inclined Entry
  • Drilling: Inclined ExitDrilling: Inclined Exit
  • Drilling: X-OffsetDrilling: X-Offset
  • Drilling: ConvexDrilling: Convex
  • Shank - Cylindrical Whistle Notch with Drive and FlangeShank - Cylindrical Whistle Notch with Drive and Flange
  • Through Coolant: Radial: Indexable DrillingThrough Coolant: Radial: Indexable Drilling
  • Drilling: BlindDrilling: Blind
  • Chain DrillingChain Drilling
  • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
  • Drilling:  Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
  • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

Materiały przedmiotu obrabianego

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials

Właściwości i zalety

  • Wiertło DFSP stanowi połączenie ekonomicznej, kwadratowej płytki zewnętrznej i znakomitych właściwości centrujących wewnętrznej płytki trygonalnej.

  • Wiertło dostarczane ze śrubami mocującymi płytki oraz kluczem Torx.

  • Płytki do DFSP należy zamawiać oddzielnie. Informacje na temat płytek można znaleźć na stronach J89–J90.

Strona maszyny

ładowanie...

Strona przedmiotu obrabianego

ładowanie...

OSTRZEŻENIE • Drill Fix DFR

Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?