Sending to SolidCAM in progress...

Downloaded file will be available after import in the SolidCAM tool library.

Korpusy Drill Fix™ DFR™
Korpusy Drill Fix™ DFR™
Korpusy Drill Fix™ DFR™
Korpusy Drill Fix™ DFR™
Select the files you wish to request
Downloads
Request {{cadTool}} format
{{cadTool}} format is not available

DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric

Korpusy Drill Fix™ DFR™

Metryczne
Calowe
SAP Material Number 4122526
ISO Catalog Number KM50TSDFR140R3M
ANSI Catalog Number KM50TSDFR140R3M
[CSMS] System Size Machine Side KM50TS
[D1] Drill Diameter M 14 mm
[D1] Drill Diameter M .5512 in
[D1MAX] Drill Diameter Maximum 15 mm
[D1MAX] Drill Diameter Maximum .5906 in
[L1] Insert Gage Length 72.368 mm
[L1] Insert Gage Length 2.849 in
[L4] Maximum Drilling Depth 42 mm
[L4] Maximum Drilling Depth 1.653 in
[L5] Drill Point Length 0.515 mm
[L5] Drill Point Length .0203 in
Gage Insert DFR0202.
Zobacz wszystkie warianty produktów

Zastosowania

  • DrillingDrilling
  • Drilling: Inclined EntryDrilling: Inclined Entry
  • Drilling: Inclined ExitDrilling: Inclined Exit
  • Drilling: X-OffsetDrilling: X-Offset
  • Drilling: ConvexDrilling: Convex
  • Shank: KM-TS™ ISO 26622Shank: KM-TS™ ISO 26622
  • Through Coolant: Radial: Indexable DrillingThrough Coolant: Radial: Indexable Drilling
  • Drilling: BlindDrilling: Blind
  • Chain DrillingChain Drilling
  • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
  • Drilling:  Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
  • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

Materiały przedmiotu obrabianego

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys

Właściwości i zalety



  • Drill Fix DFR with rectangular-shaped inserts offer highest stability and feed rates at smaller sizes.

  • X-offset design to adjust diameter size on turning machines and optimize tolerances on machining centers.

  • Benefit from the KM-TS™ coupling as most precise and most stable tooling system allowing fully automated tool changing.

  • Drill shipped with insert screws and Torx wrench.

Strona maszyny

ładowanie...

Strona przedmiotu obrabianego

ładowanie...

OSTRZEŻENIE • Drill Fix DFR

Dimensions • Chwyt DFR Whistle Notch (WD)

Dimensions • Chwyt DFR Weldon® • DIN 1835-1, kształt B

Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?