Sending to SolidCAM in progress...

Downloaded file will be available after import in the SolidCAM tool library.

Toczenie ciężkie • Płytka z węglika spiekanego • Typ C negatywowy
Toczenie ciężkie • Płytka z węglika spiekanego • Typ C negatywowy
Toczenie ciężkie • Płytka z węglika spiekanego • Typ C negatywowy
Toczenie ciężkie • Płytka z węglika spiekanego • Typ C negatywowy
Toczenie ciężkie • Płytka z węglika spiekanego • Typ C negatywowy
Toczenie ciężkie • Płytka z węglika spiekanego • Typ C negatywowy
Toczenie ciężkie • Płytka z węglika spiekanego • Typ C negatywowy
Toczenie ciężkie • Płytka z węglika spiekanego • Typ C negatywowy
Select the files you wish to request
Downloads SDS
Request {{cadTool}} format
{{cadTool}} format is not available

FIX8™ • Płytka negatywowa • CNUX-RN

Toczenie ciężkie • Płytka z węglika spiekanego • Typ C negatywowy

Metryczne
Calowe
SAP Material Number 6710686
ISO Catalog Number CNUX191016LRN
ANSI Catalog Number CNUX6674LRN
Grade KCP25B
Insert Hand L
[L10] Insert Cutting Edge Length 12 mm
[L10] Insert Cutting Edge Length .472 in
[D] Insert IC Size 19.05 mm
[D] Insert IC Size .75 in
[D1] Insert Hole Size 7.21 mm
[D1] Insert Hole Size .2839 in
[S] Insert Thickness 10.58 mm
[S] Insert Thickness .4165 in
[W] Insert Width 18.95 mm
[W] Insert Width .7461 in
[Rε] Corner Radius 1.6 mm
[Rε] Corner Radius .063 in
INS_REG_AP_MAX_M 4 mm
INS_REG_AP_MAX_I .1575 in
Zobacz wszystkie warianty produktów

Zastosowania

  • 100788768100788768
  • TurningTurning
  • FacingFacing
  • ChamferingChamfering

Materiały przedmiotu obrabianego

P Steel
K Cast Iron

Właściwości i zalety



  • Inserts can withstand large cutting forces and vibrations due to the holder's rigid clamping system.

  • Large depth of cut (up to 12mm) and feed rate (up to 1.4mm) ensure highest possible metal removal rates in steel, cast iron, and stainless steels.

  • Ideal for medium machining and roughing reducing cost per edge.

  • 8 cutting edges on the insert for higher productivity.

  • Tangential design increases the amount of carbide between the workpiece and the tool holder, allowing the system to take higher loads.

  • With 15% less cutting forces, FIX8 is also well suited for low horsepower lathes.

Strona maszyny

ładowanie...

Strona przedmiotu obrabianego

ładowanie...
Zamierzasz dodać do strony Moje rozwiązania. Czy chcesz kontynuować?
product-image
Please adjust the following properties from

Oznaczenie katalogowe ISO

Oznaczenie katalogowe ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Powinieneś być zalogowany, aby zobaczyć informacje o swoim pulpicie nawigacyjnym
Session expired due to inactivity, please login again
Produkty (), które próbowałeś dodać do koszyka, są niedostępne, skontaktuj się z działem obsługi klienta.
produkty dodane do koszyka

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Oznaczenie katalogowe ISO Gatunek    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?