Drilling: Stacked Plates
Drilling
Tool Dimensions: 2flute/2margin/coolant
DIN number 6535
DIN number 6537
Drilling - Through Coolant
Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
Shank - Cylindrical Plain ≤h6
Helix Angle: 30°
DIN Numbers: ER ColletDownloaded file will be available after import in the {{cadTool}} tool library.
| Nr materiału | 5434790 |
| Nr katalogowy ISO | B285A08500HPS |
| Nr katalogowy ANSI | B285A08500HPS |
| Grade | KN15 |
| [D1] Drill Diameter M | 8.5 mm |
| [D1] Drill Diameter M | 0.3346 in |
| [L] Overall Length | 103 mm |
| [L] Overall Length | 4.0551 in |
| [L3] Flute Length | 61 mm |
| [L3] Flute Length | 2.4016 in |
| [L4] Maximum Drilling Depth | 49 mm |
| [L4] Maximum Drilling Depth | 1.9291 in |
| [L5] Drill Point Length | 1.57 mm |
| [L5] Drill Point Length | 0.0618 in |
| [LS] Shank Length | 40 mm |
| [LS] Shank Length | 1.5748 in |
| [D] Adapter / Shank / Bore Diameter | 10 mm |
| [D] Adapter / Shank / Bore Diameter | 0.3937 in |
Drilling: Stacked PlatesDrillingTool Dimensions: 2flute/2margin/coolantDIN number 6535DIN number 6537Drilling - Through CoolantThrough Coolant: MQL (Minimum Quantity Lubricant): DrillingShank - Cylindrical Plain ≤h6Helix Angle: 30°DIN Numbers: ER ColletGatunki
KN15
Composition: Uncoated, highly wear-resistant fine-grain carbide.
Application: Highly polished chip flute surfaces ensure superior chip evacuation and reduce tendency for built-up edges. First choice for non-ferrous materials.
Złóż nowe rozwiązanie aby obliczyc parametry posuwu i prędkości
Po złóżeniu rozwiązania wybierz ikonę "Posuwy i prędkości" a system pokaże rekomendowane wartości. Możesz doprecyzować wyniki dodając maszynę i jej specyfikacje lub zmień wartości początkowe Używając suwaki.
| Grupa materiałowa |  |  |  | ||||||||||
| Prędkość skrawania | Metryczne | ||||||||||||
| Zakres prędkości skrawania | Zalecana wartość prędkości posuwu w zależności od średnicy (f) | ||||||||||||
| Min. | Wartość początkowa | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| N | 1 | 120 | 230 | 450 | mm/obr. | 0,13–0,25 | 0,14–0,29 | 0,17–0,35 | 0,21–0,42 | 0,27–0,50 | 0,33–0,57 | 0,37–0,69 | 0,43–0,82 |
| 2 | 120 | 220 | 350 | mm/obr. | 0,14–0,23 | 0,15–0,28 | 0,17–0,34 | 0,22–0,39 | 0,29–0,46 | 0,34–0,54 | 0,39–0,67 | 0,45–0,80 | |
| 3 | 100 | 180 | 400 | mm/obr. | 0,13–0,20 | 0,14–0,21 | 0,16–0,27 | 0,20–0,33 | 0,28–0,40 | 0,33–0,45 | 0,38–0,60 | 0,44–0,68 | |
| 4 | 100 | 130 | 300 | mm/obr. | 0,10–0,18 | 0,12–0,20 | 0,14–0,26 | 0,16–0,30 | 0,18–0,34 | 0,20–0,38 | 0,24–0,42 | 0,28–0,46 | |
| Grupa materiałowa | | | | ||||||||||
| Grupa materiałowa | Prędkość skrawania | Calowe | |||||||||||
| Zakres prędkości skrawania [SFM] | Zalecana wartość prędkości posuwu w zależności od średnicy (f) | ||||||||||||
| Min. | Wartość początkowa | Maks. | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| N | 1 | 390 | 750 | 1480 | IPR | 0.005–0.010 | 0.006–0.011 | 0.007–0.014 | 0.008–0.017 | 0.011–0.020 | 0.013–0.022 | 0.015–0.027 | 0.017–0.032 |
| 2 | 390 | 720 | 1150 | IPR | 0.006–0.009 | 0.006–0.011 | 0.007–0.013 | 0.009–0.015 | 0.011–0.018 | 0.013–0.021 | 0.015–0.026 | 0.018–0.032 | |
| 3 | 330 | 590 | 1310 | IPR | 0.005–0.008 | 0.006–0.008 | 0.006–0.011 | 0.008–0.013 | 0.011–0.016 | 0.013–0.018 | 0.015–0.024 | 0.017–0.027 | |
| 4 | 330 | 430 | 980 | IPR | 0.004–0.007 | 0.005–0.008 | 0.006–0.010 | 0.006–0.012 | 0.007–0.013 | 0.008–0.015 | 0.009–0.017 | 0.011–0.018 | |
| | | |||||||||||
| Prędkość skrawania | Metryczne | ||||||||||||
| Zakres prędkości skrawania | Zalecana wartość prędkości posuwu w zależności od średnicy (f) | ||||||||||||
| Grupa materiałowa | Min. | Wartość początkowa | Maks. | 3.0 | 4.0 | 6.0 | 8.0 | 10.0 | 12.0 | 16.0 | 20.0 | ||
| N | 1 | 120 | 230 | 450 | mm/giro | 0.13 | 0.14 | 0.17 | 0.21 | 0.27 | 0.33 | 0.37 | 0.43 |
| 2 | 120 | 220 | 350 | mm/giro | 0.14 | 0.15 | 0.17 | 0.22 | 0.29 | 0.34 | 0.39 | 0.45 | |
| 3 | 100 | 180 | 400 | mm/giro | 0.13 | 0.14 | 0.16 | 0.20 | 0.28 | 0.33 | 0.38 | 0.44 | |
| 4 | 100 | 130 | 300 | mm/giro | 0.10 | 0.12 | 0.14 | 0.16 | 0.18 | 0.20 | 0.24 | 0.28 | |
| Tolerancja • Metryczne | ||
| zakres rozmiarów nominalnych | D1 tolerancja m7 | D tolerancja h6 |
| 0,004/0,016 | 0,000/-0,008 | |
| 0,006/0,021 | 0,000/-0,009 | |
| 0,007/0,025 | 0,000/-0,011 | |
| 0,008/0,029 | 0,000/-0,013 | |
| Tolerancja • Calowe | ||
| zakres rozmiarów nominalnych | D1 tolerancja m7 | D tolerancja h6 |
| .0002/.0006 | .0000/-.0003 | |
| .0002/.0008 | .0000/-.0004 | |
| .0003/.0010 | .0000/-.0004 | |
| .0003/.0011 | .0000/-.0005 | |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Oznaczenie katalogowe ISO
Oznaczenie katalogowe ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Oznaczenie katalogowe ISO | Gatunek |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?