KNGX • NPR/L
|SAP Material Number||4050537|
|ISO Catalog Number||KNGX220404R25|
|ANSI Catalog Number||NPR331N|
|[LI] Insert Length||18.6180|
|[LI] Insert Length||.7330|
|[L10] Insert Cutting Edge Length||22.7310|
|[L10] Insert Cutting Edge Length||.8949|
|[W] Insert Width||9.5250|
|[W] Insert Width||.3750|
|[S] Insert Thickness||4.7630|
|[S] Insert Thickness||.1875|
|[M] Gage Dimension||19.9100|
|[M] Gage Dimension||.7837|
|[Rε] Corner Radius||0.4000|
|[Rε] Corner Radius||.0156|
Composition: A hard, low binder content, alloyed grade WC/Co fine-grain grade.
Application: The K68 grade has excellent abrasion resistance for machining cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and as an alternative to the K313 grade on most high-temperature alloys. Use as a general-purpose grade for non-ferrous materials.NS
Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.PMKNSH
Composition: An advanced PVD-AlTiN-coated grade with a tough, ultra-fine-grain unalloyed substrate.
Application: For general-purpose machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials. Speeds may vary from low to medium and will handle interruptions and high feed rates.PMKNS
Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
Application: The KCU10 grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.PMKNSH
Turning Composition: An advanced PVD grade with hard AlTiN coating and fine-grain unalloyed substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
Turning Application: The KCU25 grade is ideal for general machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials in a wide range of speeds and feeds with improved edge toughness for interrupted cut and high feed rates.
Holemaking Composition: Advanced CVD TiCN-Al2O3 coating combined with a tough carbide substrate.
Holemaking Application: First choice for steel, stainless steel, and cast iron. This grade offers adequate deformation resistance, excellent edge strength, and superior wear resistance over a wide range of machining conditions for high productivity with very good reliability.PMKNS
composition: A polycrystalline diamond tip (PCD) brazed onto a
application: The KD100 grade is for general purpose turning. The
cutting tool material contains a binder in addition to diamond
particles. This makes the KD100 grade suitable for roughing to
finishing all types of highly abrasive workpieces, including non-ferrous
metals and non-metallics. Use as your first choice on high content
silicon aluminum alloys (hypereutectic). Will generally produce good
surface finishes. Provides the best mechanical shock resistance of the
diamond tool materials. The cutting edge is sharp. This grade operates
at very high speeds.
Composition: A multilayer PVD-TiN/TiCN/TiN-coated cermet turning grade.
Application: Ideal for high-speed finishing to medium machining of most carbon and alloy steels and stainless steels. Performs very well in cast and ductile iron applications, too. Provides long and consistent tool life and will produce excellent workpiece finishes.PM