successfully added to cart
View Cart
List price:
Discount: %
Your price::
Your price::
Replacement This item is not available
Replacement Product This item may be available through a distributor
Qty
      Płytki Kenloc™
      Płytki Kenloc™
      Płytki Kenloc™
      Płytki Kenloc™

      Płytki negatywowe • CNMG-RP

      Płytki Kenloc™

      Workpiece Materials

      P Steel
      M Stainless Steel
      K Cast Iron
      S High-Temp Alloys

      Features and benefits

      • Geometria do obróbki zgrubnej z dodatnim kątem natarcia i łamaczem wióra do obróbki materiałów trudnoskrawalnych.

      • Z uwzględnieniem gatunków Beyond™ Drive™.

      Machine Side

      loading...

      Workpiece Side

      loading...

      Grades

      • KC5010

        Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
        Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.

        P Steel
        M Stainless Steel
        S High-Temp Alloys
      • KC5025

        Composition: An advanced PVD-AlTiN-coated grade with a tough, ultra-fine-grain unalloyed substrate.
        Application: For general-purpose machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials. Speeds may vary from low to medium and will handle interruptions and high feed rates.

        M Stainless Steel
        S High-Temp Alloys
      • KCK05

        Composition: A multilayered coating with moderately thick MTCVD TiCN-Al2O3 layers over a highly deformation-resistant carbide substrate.
        Application: Designed for high-speed machining of grey and ductile irons. The substrate and coating architecture together with CW5 post-coat treatment ensure a tremendous tool life advantage, especially when cutting higher tensile strength ductile and grey irons where workpiece size consistency and reliability of tool life are critical. Excellent both in straight and varied depths of cut.

        P Steel
        K Cast Iron
      • KCK05B

        Composition: A multilayered coating with moderately thick MTCVD TiCN-Al2O3-TiOCN layers over a highly deformation-resistant carbide substrate.

        Application: Designed for high-speed machining of gray and ductile irons. The substrate and coating architecture together with CW5 post-coat treatment ensure a tremendous tool life advantage, especially when cutting higher tensile strength ductile and gray irons where workpiece size consistency and reliability of tool life are critical. Excellent both in straight and varied depths of cut.

        P Steel
        K Cast Iron
      • KCK15

        Composition: A multilayered coating with thick MTCVD TiCN-Al2O3 layers applied over a carbide substrate specifically engineered for cast irons.
        Application: Delivers consistent performance in high-speed machining of grey and ductile irons. The substrate design permits the insert to stay in the cut for a long time at high speeds with minimum deformation. The thick CVD coating and post-coat treatment provide superior wear resistance ensuring long and consistent tool life. Can be applied both in straight and lightly interrupted cuts.

        P Steel
        K Cast Iron
      • KCK15B

        Composition: A multilayered coating with thick MTCVD TiCN-Al2O3-TiOCN layers applied over a carbide substrate specifically engineered for cast irons.

        Application: Delivers consistent performance in high-speed machining of gray and ductile irons. The substrate design permits the insert to stay in the cut for a long time at high speeds with minimum deformation. The thick CVD coating and post-coat treatment provide superior wear resistance ensuring long and consistent tool life. Can be applied both in straight and lightly interrupted cuts.

        P Steel
        K Cast Iron
      • KCK20

        Composition: A specially toughened MTCVD-TICN-Al2O3 coating over a wear-resistant substrate.
        Application: The KCK20 grade is specifically engineered to maximise coating adhesion and edge strength making this grade ideal in wet interrupted cutting of grey and ductile irons. It can be used in a wide range of applications from finishing to roughing to maximise productivity wherever strength and reliability are needed.

        P Steel
        K Cast Iron
      • KCK20B

        Composition: A specially toughened MTCVD-TICN-Al2O3-TiOCN coating over a wear-resistant substrate.

        Application: The KCK20 grade is specifically engineered to maximize coating adhesion and edge strength making this grade ideal in wet interrupted cutting of gray and ductile irons. It can be used in a wide range of applications from finishing to roughing to maximize productivity wherever strength and reliability are needed.

        P Steel
        K Cast Iron
      • KCM15

        Composition: A multilayer MTCVD-TiCN-Al2O3 coated carbide grade.
        Application: An excellent finishing to medium machining grade for austenitic stainless steels at higher speeds and covers a broad range of steel applications in the P20–25 range. KCM15 grade in combination with unique geometries have been designed to resist depth-of-cut notching and minimise burr formation. The post-coat treatment reduces coating stresses, improves coating adhesion, minimises microchipping and edge build-up, and improves workpiece finish.

        P Steel
        M Stainless Steel
        S High-Temp Alloys
      • KCM15B

        Composition: A multilayer MTCVD-TiCN-Al2O3 coated carbide grade.

        Application: An excellent finishing to medium machining grade for austenitic stainless steels at higher speeds and covers a broad range of steel applications in the P20-25 range. KCM15 grade in combination with unique geometries have been designed to resist depth-of-cut notching and minimize burr formation. The post-coat treatment reduces coating stresses, improves coating adhesion, minimizes microchipping and edge build-up, and improves workpiece finish.

        P Steel
        M Stainless Steel
        S High-Temp Alloys
      • KCM25

        Composition: A multilayer CVD coating comprised of TiN-MT-TiCN-Al2O3 layers over a tough, cobalt-enriched carbide substrate.
        Application: This CVD-coated grade is designed for general-purpose machining of austenitic stainless steels at moderate speeds and feeds. KCM25 inserts offer an extraordinary combination of toughness, built-up edge resistance, and wear resistance in stainless steel applications.

        P Steel
        M Stainless Steel
        S High-Temp Alloys
      • KCM25B

        Composition: A multilayer MTCVD-TiCN-Al2O3-TiOCN coated carbide grade.

        Application: An excellent finishing to medium machining grade for austenitic stainless steels at higher speeds and covers a broad range of steel applications in the P20-25 range. KCM15 grade in combination with unique geometries have been designed to resist depth-of-cut notching and minimize burr formation. The post-coat treatment reduces coating stresses, improves coating adhesion, minimizes microchipping and edge build-up, and improves workpiece finish.

        P Steel
        M Stainless Steel
        S High-Temp Alloys
      • KCM35

        Composition: A multilayer TiN-MT-TiCN-Al2O3 CVD coating over a super-tough substrate.
        Application: The KCM35 grade is engineered to take on the most brutal cast stainless steel machining applications. The substrate withstands heavy interruptions, while the coating provides the wear resistance needed for long tool life. The polished surface resists edge build-up, even at slow cutting speeds. KCM35 grade is available in insert sizes and geometries appropriate for heavy feeds and large depths of cut.

        P Steel
        M Stainless Steel
        S High-Temp Alloys
      • KCM35B

        Composition: A multilayer TiN-MT-TiCN-Al2O3-TiOCN CVD coating over a super-tough substrate.

        Application: The KCM35 grade is engineered to take on the most brutal cast stainless steel machining applications. The substrate withstands heavy interruptions, while the coating provides the wear resistance needed for long tool life. The polished surface resists edge build-up, even at slow cutting speeds. KCM35 grade is available in insert sizes and geometries appropriate for heavy feeds and large depths of cut.

        P Steel
        M Stainless Steel
        S High-Temp Alloys
      • KCP05

        Composition: An innovative, highly deformation-resistant, cobalt-enriched substrate with a specially designed, adherent MTCVD-TiCN-Al2O3 coating.
        Application: For finishing to semi-finishing of most steels, ferritic, martensitic, and PH stainless steels and cast irons. Provides excellent combination of deformation resistance and insert edge strength. The new coating combined with a state-of-the-art post-coat treatment provides high-productivity with long predictable tool life and superior workpiece surface finish.

        P Steel
        K Cast Iron
      • KCP05B

        Composition: An innovative, highly deformation-resistant, cobalt-enriched substrate with a specially designed, adherent MTCVD-TiCN-Al2O3-TiOCN coating.

        Application: For finishing to semi-finishing of most steels, ferritic, martensitic, and PH stainless steels and cast irons. Provides excellent combination of deformation resistance and insert edge strength. The new coating combined with a state-of-the-art post-coat treatment provides high-productivity with long predictable tool life and superior workpiece surface finish.

        P Steel
        K Cast Iron
      • KCP10

        Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3 coating for maximum wear resistance.
        Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

        P Steel
        K Cast Iron
      • KCP10B

        Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3-TiOCN coating for maximum wear resistance.

        Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

        P Steel
        K Cast Iron
      • KCP25

        Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3 coating with superior interlayer adhesion.
        Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

        P Steel
        K Cast Iron
      • KCP25B

        Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3-TiOCN coating with superior interlayer adhesion.

        Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

        P Steel
        K Cast Iron
      • KCP30

        Composition: A newly engineered, tough cobalt-enriched carbide grade with an advanced multilayer TiN-MT-TiCN-Al2O3 coating.
        Application: For medium to rough machining of all carbon, alloy, and stainless steels. The substrate design provides superior insert strength that is required for this application, and the multilayer coating adds wear resistance to the insert resulting in long tool life.

        P Steel
      • KCP30B

        Composition: A newly engineered, tough cobalt-enriched carbide grade with an advanced multilayer TiN-MT-TiCN-Al2O3-TiOCN coating.

        Application: For medium to rough machining of all carbon, alloy, and stainless steels. The substrate design provides superior insert strength that is required for this application, and the multilayer coating adds wear resistance to the insert resulting in long tool life.

        P Steel
      • KCP40

        Composition: A tough carbide grade with a moderately thick TiN-MT-TiCN-Al2O3 coating.
        Application: For heavy roughing of carbon, alloy, and stainless steels. The substrate-coating combination provides unbelievable toughness and operational security allowing high metal removal rates even in most demanding interrupted cuts.

        M Stainless Steel
      • KCP40B

        Composition: A tough carbide grade with a moderately thick TiN-MT-TiCN-Al2O3 coating.

        Application: For heavy roughing of carbon, alloy, and stainless steels. The substrate-coating combination provides unbelievable toughness and operational security allowing high metal removal rates even in most demanding interrupted cuts.

        P Steel
        M Stainless Steel
      • KCPK05

        Composition: A deformation-resistant, cobalt-enriched substrate combined with thick MTCVD TiCN-Al2O3 coating.

        Application: For high productivity turning of steels and PH stainless steels in continuous to lightly interrupted cuts. This grade provides excellent combination of toughness and high speed wear resistance allowing the fastest steel part production. Its unique combination of substrate and coating also make it an ideal roughing grade for cast iron where chipping resistance is required.

        P Steel
        K Cast Iron
      • KCS10B

        Composition: PVD-AlTiN coating with a very smooth coating surface and extremely hard, wear-resistant ultra fine-grain carbide substrate.
        Application: The KCS10B™ grade is ideal for medium machining and finishing operations of Nickel-Based, Cobalt-Based, and Iron-Based High-Temperature Alloys. The extremely hard, wear-resistant carbide substrate allows for longer tool life while the ultra fine-grain carbide substrate and smoother coating reduces friction.

        M Stainless Steel
        S High-Temp Alloys
      • KCU10

        Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
        Application: The KCU10 grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

        P Steel
        M Stainless Steel
        S High-Temp Alloys
      • KCU25

        Turning Composition: An advanced PVD grade with hard AlTiN coating and fine-grain unalloyed substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.

        Turning Application: The KCU25 grade is ideal for general machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials in a wide range of speeds and feeds with improved edge toughness for interrupted cut and high feed rates.

        Holemaking Composition: Advanced CVD TiCN-Al2O3 coating combined with a tough carbide substrate.

        Holemaking Application: First choice for steel, stainless steel, and cast iron. This grade offers adequate deformation resistance, excellent edge strength, and superior wear resistance over a wide range of machining conditions for high productivity with very good reliability.

        M Stainless Steel
        S High-Temp Alloys
      product-image
      Please adjust the following properties from

      ISO Catalog Number

      ANSI Catalog Number

      to find similar products.
      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
      You are about to create a duplicate . Do you want to proceed?
      You are about to delete Do you want to proceed?
      What would you like to rename your to?
      Please enter a valid name
      Please enter a name for the duplicate
      Please enter a valid name
      You are about to add to your My Solutions page. Do you want to proceed?
      Please enter a valid name
      Send a copy of

      Please enter a valid Email
      Please enter a valid name

      We have found the following CAD Drawings

      Select the files you are looking for and download them all at once

      You should be logged to see your dashboard information
      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
      item(s) successfully added to the cart
      View Cart