Ramping: Blank
Slotting: Ball Nose
Side Milling/Shoulder Milling: Ball Nose
3D Profiling
Milling - Through Coolant
Milling - Side and Face
PocketingDownloaded file will be available after import in the {{cadTool}} tool library.
| Nr materiału | 5153837 |
| Nr katalogowy ISO | KDR50Z04S22RN16 |
| Nr katalogowy ANSI | KDR50Z04S22RN16 |
| [D1MAX] Maximum Cutting Diameter | 50 mm |
| [D1MAX] Maximum Cutting Diameter | 1.969 in |
| [D1] Effective Cutting Diameter | 34 mm |
| [D1] Effective Cutting Diameter | 1.339 in |
| [D] Adapter / Shank / Bore Diameter | 22 mm |
| [D] Adapter / Shank / Bore Diameter | 0.866 in |
| [D6] Hub Diameter | 42 mm |
| [D6] Hub Diameter | 1.654 in |
| [L] Overall Length | 50 mm |
| [L] Overall Length | 1.969 in |
| [AP1MAX] 1st Maximum Cutting Depth | 3.96 mm |
| [AP1MAX] 1st Maximum Cutting Depth | 0.156 in |
| Number of Inserts | 4 |
| Maximum Ramping Angle | 0.49 |
| Weight Kilograms | 0.36 |
| Max RPM | 26700 |
| Gage Insert | RNGJ1605M0____ |
Ramping: BlankSlotting: Ball NoseSide Milling/Shoulder Milling: Ball Nose3D ProfilingMilling - Through CoolantMilling - Side and FacePocketingZłóż nowe rozwiązanie aby obliczyc parametry posuwu i prędkości
Po złóżeniu rozwiązania wybierz ikonę "Posuwy i prędkości" a system pokaże rekomendowane wartości. Możesz doprecyzować wyniki dodając maszynę i jej specyfikacje lub zmień wartości początkowe Używając suwaki.
| Geometria płytki | Programmed feed per tooth (fz) as a % of radial depth of cut (ae) of working diameter (dw) | Geometria płytki | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .E..LDJ | 0,12 | 0,44 | 0,80 | 0,09 | 0,32 | 0,57 | 0,07 | 0,24 | 0,43 | 0,06 | 0,21 | 0,37 | 0,05 | 0,19 | 0,34 | .E..LDJ |
| .E..LD | 0,12 | 0,44 | 0,80 | 0,09 | 0,32 | 0,57 | 0,07 | 0,24 | 0,43 | 0,06 | 0,21 | 0,37 | 0,05 | 0,19 | 0,34 | .E..LD |
| .S..GD | 0,23 | 0,50 | 0,89 | 0,17 | 0,36 | 0,64 | 0,13 | 0,27 | 0,48 | 0,11 | 0,24 | 0,42 | 0,10 | 0,22 | 0,38 | .S..GD |
| .S..HD | 0,23 | 0,59 | 0,95 | 0,17 | 0,43 | 0,68 | 0,13 | 0,32 | 0,51 | 0,11 | 0,28 | 0,44 | 0,10 | 0,25 | 0,41 | .S..HD |
| Obróbka lekka | Obróbka średnia | Obróbka ciężka |
| Geometria płytki | Programmed feed per tooth (fz) as a % of radial depth of cut (ae) of working diameter (dw) | Geometria płytki | ||||||||||||||
| 5% | 10% | 20% | 30% | 40%–100% | ||||||||||||
| .E..LDJ | 0,17 | 0,61 | 1,10 | 0,12 | 0,44 | 0,79 | 0,09 | 0,33 | 0,59 | 0,08 | 0,29 | 0,51 | 0,07 | 0,26 | 0,47 | .E..LDJ |
| .E..LD | 0,17 | 0,61 | 1,10 | 0,12 | 0,44 | 0,79 | 0,09 | 0,33 | 0,59 | 0,08 | 0,29 | 0,51 | 0,07 | 0,26 | 0,47 | .E..LD |
| .S..GD | 0,32 | 0,70 | 1,24 | 0,23 | 0,50 | 0,89 | 0,18 | 0,38 | 0,66 | 0,15 | 0,33 | 0,58 | 0,14 | 0,30 | 0,53 | .S..GD |
| .S..HD | 0,32 | 0,81 | 1,32 | 0,23 | 0,59 | 0,94 | 0,18 | 0,44 | 0,70 | 0,15 | 0,38 | 0,61 | 0,14 | 0,35 | 0,56 | .S..HD |
| Geometria płytki | Programmed feed per tooth (fz) as a % of radial depth of cut (ae) of working diameter (dw) | Geometria płytki | ||||||||||||||
| 5% | 10% | 20% | 30% | 40%–100% | ||||||||||||
| .E..LDJ | 0,26 | 0,92 | 1,67 | 0,19 | 0,66 | 1,19 | 0,14 | 0,49 | 0,89 | 0,12 | 0,43 | 0,77 | 0,11 | 0,39 | 0,71 | .E..LDJ |
| .E..LD | 0,26 | 0,92 | 1,67 | 0,19 | 0,66 | 1,19 | 0,14 | 0,49 | 0,89 | 0,12 | 0,43 | 0,77 | 0,11 | 0,39 | 0,71 | .E..LD |
| .S..GD | 0,49 | 1,05 | 1,88 | 0,35 | 0,75 | 1,34 | 0,26 | 0,56 | 0,99 | 0,23 | 0,49 | 0,86 | 0,21 | 0,45 | 0,79 | .S..GD |
| .S..HD | 0,49 | 1,23 | 2,00 | 0,35 | 0,88 | 1,42 | 0,26 | 0,66 | 1,05 | 0,23 | 0,57 | 0,92 | 0,21 | 0,52 | 0,84 | .S..HD |
| Geometria płytki | Programmed feed per tooth (fz) as a % of radial depth of cut (ae) of working diameter (dw) | Geometria płytki | ||||||||||||||
| 5% | 10% | 20% | 30% | 40%–100% | ||||||||||||
| .E..LDJ | 0,21 | 0,76 | 1,38 | 0,15 | 0,55 | 0,99 | 0,12 | 0,41 | 0,74 | 0,10 | 0,36 | 0,64 | 0,09 | 0,33 | 0,59 | .E..LDJ |
| .E..LD | 0,21 | 0,76 | 1,38 | 0,15 | 0,55 | 0,99 | 0,12 | 0,41 | 0,74 | 0,10 | 0,36 | 0,64 | 0,09 | 0,33 | 0,59 | .E..LD |
| .S..GD | 0,40 | 0,87 | 1,55 | 0,29 | 0,63 | 1,11 | 0,22 | 0,47 | 0,82 | 0,19 | 0,41 | 0,72 | 0,17 | 0,37 | 0,66 | .S..GD |
| .S..HD | 0,40 | 1,02 | 1,65 | 0,29 | 0,73 | 1,18 | 0,22 | 0,55 | 0,87 | 0,19 | 0,48 | 0,76 | 0,17 | 0,44 | 0,70 | .S..HD |
| Grupa materiałowa | KCK15 | KC520M | KCPM20 | KC522M | KC725M | KCMP30 | KCPK30 | |||||||||||||||
| P | 1 | – | – | – | – | – | – | 660 | 580 | 535 | 395 | 345 | 325 | 315 | 275 | 255 | 545 | 475 | 440 | 545 | 475 | 440 |
| 2 | – | – | – | – | – | – | 410 | 370 | 330 | 330 | 290 | 240 | 260 | 230 | 195 | 335 | 305 | 275 | 335 | 305 | 275 | |
| 3 | – | – | – | – | – | – | 370 | 330 | 305 | 305 | 255 | 215 | 240 | 205 | 170 | 305 | 275 | 250 | 305 | 275 | 250 | |
| 4 | – | – | – | – | – | – | 275 | 255 | 230 | 270 | 225 | 180 | 215 | 180 | 145 | 225 | 210 | 190 | 225 | 210 | 190 | |
| 5 | – | – | – | – | – | – | 330 | 300 | 275 | 225 | 200 | 180 | 180 | 160 | 145 | 310 | 275 | 255 | 310 | 275 | 255 | |
| 6 | – | – | – | – | – | – | 230 | 200 | 175 | 200 | 150 | 120 | 160 | 120 | 95 | 190 | 165 | – | 190 | 165 | – | |
| M | 1 | – | – | – | – | – | – | 270 | 240 | 205 | 245 | 215 | 200 | 205 | 180 | 165 | 250 | 220 | 190 | 250 | 220 | 190 |
| 2 | – | – | – | – | – | – | 245 | 215 | 190 | 225 | 190 | 160 | 185 | 160 | 130 | 225 | 195 | 170 | 225 | 195 | 170 | |
| 3 | – | – | – | – | – | – | 195 | 175 | 150 | 170 | 145 | 115 | 140 | 120 | 95 | 175 | 160 | 140 | 175 | 160 | 140 | |
| K | 1 | 505 | 460 | 410 | 325 | 295 | 260 | 435 | 390 | 350 | 275 | 250 | 220 | – | – | – | – | – | – | – | – | – |
| 2 | 400 | 355 | 330 | 255 | 225 | 215 | 345 | 310 | 280 | 215 | 195 | 180 | – | – | – | – | – | – | – | – | – | |
| 3 | 335 | 300 | 275 | 215 | 190 | 170 | 290 | 255 | 240 | 180 | 160 | 145 | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | 45 | 35 | 30 | 45 | 35 | 30 |
| 2 | – | – | – | – | – | – | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | 45 | 35 | 30 | 45 | 35 | 30 | |
| 3 | – | – | – | – | – | – | – | – | – | 60 | 50 | 35 | 55 | 45 | 30 | 55 | 45 | 30 | 55 | 45 | 30 | |
| 4 | – | – | – | – | – | – | – | – | – | 85 | 60 | 45 | 75 | 55 | 35 | 75 | 55 | 35 | 75 | 55 | 35 | |
| H | 1 | – | – | – | – | – | – | 170 | 140 | 115 | 145 | 110 | 85 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Grupa materiałowa | Obróbka lekka | Obróbka średnia | Obróbka ciężka | |||
| – | (Lekka geometria) | – | (Zgrubna geometria) | |||
| – | odporność na zużycie |  | ciągliwość | |||
| – | Geometria | Gatunek | Geometria | Gatunek | Geometria | Gatunek |
| P1–P2 | .E..LDJ | KC725M | .S..GD | KCPM40 | .S..HD | KCPM40 |
| P3–P4 | .E..LDJ | KC522M | .S..GD | KCPK30 | .S..HD | KCPM40 |
| P5–P6 | .E..LDJ | KC725M | .S..GD | KC725M | .S..HD | KC725M |
| M1–M2 | .E..LDJ | KC522M | .S..HD | KC725M | .S..GD | KCSM40 |
| M3 | .E..LDJ | KC725M | .S..GD | KCPM40 | .S..HD | KCPM40 |
| K1–K2 | .S..HD | KC520M | .S..HD | KC520M | .S..HD | KCK15 |
| K3 | .S..GD | KCPK30 | .S..HD | KC520M | .S..HD | KCK15 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..LDJ | KC725M | .S..GD | KCSM40 | .S..HD | KC725M |
| S3 | .E..LDJ | KC725M | .S..GD | KCSM40 | .S..HD | KCPM40 |
| S4 | .E..LDJ | KC522M | .S..GD | KCSM40 | .S..HD | KC725M |
| H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Oznaczenie katalogowe ISO
Oznaczenie katalogowe ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Oznaczenie katalogowe ISO | Gatunek |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?