|SAP Material Number||3751545|
|ISO Catalog Number||SNMG190616|
|ANSI Catalog Number||SNMG644|
|[D] Insert IC Size||19.0500|
|[D] Insert IC Size||.7500|
|[L10] Insert Cutting Edge Length||19.0500|
|[L10] Insert Cutting Edge Length||.7500|
|[S] Insert Thickness||6.3500|
|[S] Insert Thickness||.2500|
|[Rε] Corner Radius||1.6000|
|[Rε] Corner Radius||.0625|
|[D1] Insert Hole Size||7.9300|
|[D1] Insert Hole Size||.3125|
Features and benefits
- Z uwzględnieniem gatunków Beyond™ Drive™.
CVD-TiN-TiCN-TIN multi-layer thick coated fine grade carbide
High level of wear resistance
Primarily for use on unalloyed carbon steels as well as alloyed steel and cast steel
Uncoated carbide grade
Heavy Machining (H)
For machining steel
For use in unfavourable conditions
Composition: A hard, low binder content, unalloyed WC/Co fine-grain grade.
Application: Exceptional edge wear resistance combined with very high strength for machining titanium, cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and most high-temp alloys. Superior thermal deformation and depth-of-cut notch resistance. The grain structure is well controlled for minimal pits and flaws, which contributes to long, reliable service.N Non-FerrousS High-Temp Alloys
Composition: A hard, low binder content, alloyed grade WC/Co fine-grain grade.
Application: The K68 grade has excellent abrasion resistance for machining cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and as an alternative to the K313 grade on most high-temperature alloys. Use as a general-purpose grade for non-ferrous materials.N Non-FerrousS High-Temp Alloys
Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.P SteelM Stainless SteelS High-Temp Alloys
Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3-TiOCN coating for maximum wear resistance.
Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.P SteelK Cast Iron
Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3 coating with superior interlayer adhesion.
Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.P SteelK Cast Iron
Composition: A newly engineered, tough cobalt-enriched carbide grade with an advanced multilayer TiN-MT-TiCN-Al2O3-TiOCN coating.
Application: For medium to rough machining of all carbon, alloy, and stainless steels. The substrate design provides superior insert strength that is required for this application, and the multilayer coating adds wear resistance to the insert resulting in long tool life.P Steel
Composition: A tough carbide grade with a moderately thick TiN-MT-TiCN-Al2O3 coating.
Application: For heavy roughing of carbon, alloy, and stainless steels. The substrate-coating combination provides unbelievable toughness and operational security allowing high metal removal rates even in most demanding interrupted cuts.P SteelM Stainless Steel
Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
Application: The KCU10 grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.P SteelM Stainless SteelS High-Temp Alloys
Composition: Uncoated, fine grain, straight carbide grade, containing 6% cobalt.
Application: General purpose grade for use on gray iron, aluminum, and non-ferrous
work piece materials. Available for use with HTS-C deep drilling tools and CTR