KenDrill™ 3F • Altas taxas de remoção de material (MRR)
Filtros
Filtros
Exibir filtros em
MétricoPolegada
Workpiece Material
Workpiece Material
- K Cast Iron (185)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(185)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(185)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(185)
- N Non-Ferrous Materials (185)
- N1Wrought Aluminum (165)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(185)
- N3High-Silicon Aluminum Alloys Si >12.2%(185)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (165)
- S High-Temp Alloys (178)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(178)
Applications
Applications
Convex Drilling (197)
CornerStyle Chamfer Drilling (13)
Cross Hole Drilling (198)
Drilling (198)
Inclined Exit Drilling (198)
Stacked Plates Drilling (197)
Cutting Diameter
Cutting Diameter
- 2.87 mm(1)
- 3.0 mm(1)
- 3.1 mm(1)
- 3.175 mm(2)
- 3.2 mm(1)
- 3.2639 mm(1)
- 3.3 mm(1)
- 3.4 mm(1)
- 3.4544 mm(1)
- 3.4646 mm(1)
- 3.5 mm(1)
- 3.5433 mm(1)
- 3.5712 mm(1)
- 3.6 mm(1)
- 3.6576 mm(1)
- 3.7 mm(1)
- 3.8 mm(1)
- 3.8151 mm(1)
- 3.8532 mm(1)
- 3.8913 mm(1)
- 3.9 mm(1)
- 3.97 mm(1)
- 4.0 mm(1)
- 4.0386 mm(1)
- 4.1 mm(1)
- 4.125 mm(1)
- 4.2 mm(1)
- 4.2164 mm(1)
- 4.3 mm(1)
- 4.3053 mm(1)
- 4.3663 mm(1)
- 4.3942 mm(1)
- 4.4755 mm(1)
- 4.5 mm(1)
- 4.5237 mm(1)
- 4.6 mm(1)
- 4.6228 mm(1)
- 4.65 mm(1)
- 4.6609 mm(1)
- 4.7 mm(1)
- 4.7625 mm(1)
- 4.8 mm(1)
- 4.8006 mm(1)
- 4.8514 mm(1)
- 4.9 mm(1)
- 4.9149 mm(1)
- 5.0 mm(2)
- 5.019 mm(1)
- 5.0851 mm(1)
- 5.1 mm(1)
- 5.1943 mm(1)
- 5.2 mm(1)
- 5.4 mm(1)
- 5.4102 mm(1)
- 5.5 mm(1)
- 5.55 mm(1)
- 5.5575 mm(1)
- 5.6 mm(1)
- 5.7 mm(1)
- 5.7887 mm(1)
- 5.7912 mm(1)
- 5.8 mm(1)
- 5.9487 mm(1)
- 6.0 mm(1)
- 6.1 mm(1)
- 6.2 mm(1)
- 6.3 mm(1)
- 6.35 mm(3)
- 6.4 mm(1)
- 6.4262 mm(1)
- 6.5 mm(1)
- 6.5278 mm(1)
- 6.6 mm(2)
- 6.6548 mm(1)
- 6.7 mm(1)
- 6.7462 mm(2)
- 6.8 mm(3)
- 7.0 mm(2)
- 7.1 mm(1)
- 7.145 mm(2)
- 7.2898 mm(1)
- 7.3127 mm(1)
- 7.4 mm(1)
- 7.5 mm(1)
- 7.5413 mm(1)
- 7.6 mm(1)
- 7.8 mm(1)
- 7.9375 mm(2)
- 8.0 mm(3)
- 8.1 mm(1)
- 8.2 mm(1)
- 8.3 mm(1)
- 8.3337 mm(1)
- 8.4 mm(1)
- 8.5 mm(3)
- 8.5623 mm(1)
- 8.6 mm(1)
- 8.7 mm(1)
- 8.7325 mm(1)
- 8.8 mm(1)
- 8.824 mm(1)
- 9.0 mm(2)
- 9.0576 mm(1)
- 9.1 mm(1)
- 9.1288 mm(1)
- 9.3 mm(1)
- 9.5 mm(1)
- 9.525 mm(2)
- 9.7 mm(1)
- 9.8 mm(1)
- 9.9212 mm(2)
- 10.0 mm(2)
- 10.1 mm(1)
- 10.2 mm(2)
- 10.3 mm(1)
- 10.3099 mm(1)
- 10.32 mm(1)
- 10.4 mm(1)
- 10.5 mm(2)
- 10.7 mm(1)
- 10.7163 mm(2)
- 10.8 mm(1)
- 11.0 mm(3)
- 11.1 mm(1)
- 11.1125 mm(2)
- 11.2 mm(2)
- 11.5 mm(1)
- 11.5087 mm(1)
- 11.5443 mm(1)
- 11.7 mm(1)
- 11.8 mm(1)
- 11.9075 mm(1)
- 12.0 mm(2)
- 12.1 mm(1)
- 12.3038 mm(1)
- 12.5 mm(2)
- 12.7 mm(3)
- 12.8 mm(1)
- 13.0 mm(1)
- 13.1 mm(1)
- 13.5 mm(1)
- 13.8 mm(1)
- 14.0 mm(2)
- 14.2 mm(1)
- 14.2875 mm(2)
- 14.5 mm(1)
- 15.0 mm(1)
- 15.1 mm(1)
- 15.5 mm(1)
- 15.8 mm(1)
- 15.875 mm(2)
- 16.0 mm(1)
- 16.5 mm(1)
- 17.0 mm(1)
- 17.4625 mm(1)
- 17.5 mm(1)
- 18.0 mm(1)
- 18.5 mm(1)
- 19.0 mm(1)
- 19.05 mm(1)
- 19.5 mm(1)
- 20.0 mm(1)
- 20.5 mm(1)
- 20.5765 mm(1)
- 21.0 mm(1)
a
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 21.4 mm(12)
- 23.0 mm(9)
- 28.6 mm(10)
- 29.0 mm(11)
- 34.9 mm(12)
- 35.0 mm(14)
- 40.3 mm(11)
- 43.0 mm(23)
- 48.7 mm(8)
- 49.0 mm(20)
- 53.1 mm(7)
- 55.6 mm(6)
- 56.0 mm(20)
- 60.0 mm(13)
- 63.0 mm(7)
- 64.5 mm(2)
- 71.0 mm(4)
- 73.0 mm(1)
- 74.5 mm(1)
- 77.0 mm(4)
- 78.0 mm(1)
- 85.0 mm(2)
a
Reach
Reach
- 27.0 mm(12)
- 28.0 mm(9)
- 35.0 mm(10)
- 36.0 mm(11)
- 43.0 mm(12)
- 44.0 mm(14)
- 50.0 mm(11)
- 53.0 mm(23)
- 60.0 mm(8)
- 61.0 mm(20)
- 66.0 mm(7)
- 70.0 mm(6)
- 71.0 mm(20)
- 76.0 mm(2)
- 77.0 mm(11)
- 82.0 mm(2)
- 83.0 mm(7)
- 92.0 mm(1)
- 93.0 mm(4)
- 95.0 mm(1)
- 100.0 mm(1)
- 101.0 mm(4)
- 112.0 mm(2)
a
Over All Length [L]
Over All Length [L]
- 66.0 mm(21)
- 74.0 mm(21)
- 82.0 mm(25)
- 91.0 mm(30)
- 95.0 mm(1)
- 103.0 mm(26)
- 105.0 mm(1)
- 110.0 mm(3)
- 111.0 mm(5)
- 118.0 mm(24)
- 122.0 mm(1)
- 124.0 mm(12)
- 125.0 mm(1)
- 133.0 mm(10)
- 141.0 mm(1)
- 143.0 mm(6)
- 148.0 mm(1)
- 153.0 mm(5)
- 155.0 mm(1)
- 167.0 mm(2)
- 171.0 mm(1)
a
availability
gsaApproval
gsaApproval
application
Coating
Coating
- TiAlN (20)
- Uncoated (178)
Grade Of Cutting Tool
Grade Of Cutting Tool
- K10 (165)
- K715 (13)
- KC7210 (20)
backEnd
Back-End Diameter
Back-End Diameter
- 4.7625 mm(23)
- 4.763 mm(1)
- 6.0 mm(31)
- 6.35 mm(13)
- 7.9375 mm(12)
- 8.0 mm(22)
- 9.525 mm(8)
- 10.0 mm(19)
- 11.1125 mm(8)
- 12.0 mm(20)
- 12.7 mm(6)
- 14.0 mm(11)
- 14.2875 mm(2)
- 15.875 mm(2)
- 16.0 mm(7)
- 17.4625 mm(1)
- 18.0 mm(4)
- 19.05 mm(1)
- 20.0 mm(6)
- 20.6375 mm(1)
a
No filters matching ""
