Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho
Aumente o volume gastando menos com nossas ofertas por tempo limitado! Compre agora

Torneamento interno de precisão

Quando se trata da alta precisão necessária para criar componentes pequenos e micros, o TopSwiss MBS oferece uma oferta versátil com a qual você pode contar para o próximo nível de torneamento interno. Ideal para oficinas de engenharia médica, aeroespacial, automotiva e engenharia geral.

Recursos do TopSwiss MBS:

  • Quase 200 porta-ferramentas em três níveis de precisão: padrão, premium e alta performance
  • Arestas de corte excepcionalmente afiadas para a melhor vida útil da ferramenta e acabamentos superficiais
  • Cinco interfaces revestimentos/substratos de alto desempenho e específicos para materiais, para ligas resistentes a altas temperaturas, materiais endurecidos, aços inoxidáveis, aço e materiais compostos
  • Revestimento universal projetado para performance e consistência em vários materiais
Selecionar filtros
Filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (844)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(844)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(844)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(844)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(844)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(844)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(844)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(844)
    • M Stainless Steel (844)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(844)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(844)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(844)
    • K Cast Iron (844)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(844)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(844)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(844)
    • N Non-Ferrous Materials (844)
      • N1
        Wrought Aluminum (844)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(844)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(844)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (844)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (844)
      • N6
        Carbon, Graphite Composites, CFRP (844)
    • S High-Temp Alloys (844)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(844)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(844)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(844)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(844)
    • H Hardened Materials (844)
      • H1
        Hardened Materials 44-48 HRC(844)
      • H2
        Hardened Materials 48-55 HRC(844)
      • H3
        Hardened Materials 56-60 HRC(844)
      • H4
        Hardened Materials >60 HRC(844)
    Applications
    Applications
    • Back BoringBack Boring (19)
    • Face GroovingFace Grooving (176)
    • FacingFacing (49)
    • ID FacingID Facing (437)
    • ID GroovingID Grooving (212)
    • ID Thread TurningID Thread Turning (128)
    • TRN BoringTRN Boring (453)
    • ThreadingThreading (128)
    • TurningTurning (49)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 0.0 (128)
    • 45.0 (16)
    • 90.0 (433)
    • 93.0 (19)
    • 96.0 (92)
    • 98.0 (284)
    Tool Cutting Edge Angle MinaTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Boring Bar Shank (923)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 3.543 in(16)
    • 5.118 in(16)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 90.0 mm(16)
    • 130.0 mm(16)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(48)
    • 0.001 in(42)
    • 0.002 in(119)
    • 0.004 in(282)
    • 0.006 in(114)
    • 0.008 in(151)
    • 0.016 in(14)
    • 0.02 in(18)
    • 0.03 in(6)
    • 0.031 in(12)
    • 0.039 in(18)
    • 0.049 in(10)
    • 0.06 in(10)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(48)
    • 0.025 mm(42)
    • 0.05 mm(119)
    • 0.1 mm(282)
    • 0.151 mm(114)
    • 0.2 mm(151)
    • 0.4 mm(14)
    • 0.5 mm(18)
    • 0.75 mm(6)
    • 0.775 mm(2)
    • 0.8 mm(10)
    • 1.0 mm(18)
    • 1.25 mm(10)
    • 1.5 mm(10)
    Corner Radius MinaCorner Radius Max
    application
    Hand Of Tool
    Hand Of Tool
    • L (461)
    • R (462)
    F Dimension
    F Dimension
    • 0.025 mm(1)
    • 0.1 mm(4)
    • 0.151 mm(1)
    • 0.2 mm(18)
    • 0.301 mm(2)
    • 0.351 mm(4)
    • 0.4 mm(4)
    • 0.45 mm(2)
    • 0.601 mm(42)
    • 0.675 mm(2)
    • 0.701 mm(19)
    • 0.8 mm(4)
    • 0.9 mm(15)
    • 1.0 mm(8)
    • 1.1 mm(14)
    • 1.25 mm(4)
    • 1.5 mm(105)
    • 1.6 mm(18)
    • 1.8 mm(16)
    • 1.901 mm(142)
    • 2.0 mm(12)
    • 2.1 mm(18)
    • 2.2 mm(70)
    • 2.301 mm(150)
    • 2.401 mm(48)
    • 2.5 mm(30)
    • 2.7 mm(4)
    • 2.801 mm(85)
    • 3.0 mm(14)
    • 3.301 mm(16)
    F Dimension MinaF Dimension Max
    F Dimension
    F Dimension
    • 0.001 in(1)
    • 0.004 in(4)
    • 0.006 in(1)
    • 0.008 in(18)
    • 0.012 in(2)
    • 0.014 in(4)
    • 0.016 in(4)
    • 0.019 in(2)
    • 0.024 in(42)
    • 0.027 in(2)
    • 0.028 in(19)
    • 0.031 in(4)
    • 0.035 in(15)
    • 0.039 in(8)
    • 0.044 in(14)
    • 0.049 in(4)
    • 0.06 in(105)
    • 0.063 in(18)
    • 0.072 in(16)
    • 0.075 in(142)
    • 0.079 in(12)
    • 0.083 in(18)
    • 0.088 in(70)
    • 0.091 in(150)
    • 0.095 in(48)
    • 0.098 in(30)
    • 0.106 in(4)
    • 0.11 in(85)
    • 0.119 in(14)
    • 0.13 in(16)
    F Dimension MinaF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.301 mm(2)
    • 0.4 mm(2)
    • 0.5 mm(4)
    • 0.601 mm(4)
    • 0.701 mm(2)
    • 0.8 mm(4)
    • 1.0 mm(16)
    • 1.201 mm(2)
    • 1.5 mm(20)
    • 1.701 mm(2)
    • 2.0 mm(37)
    • 2.1 mm(3)
    • 2.401 mm(6)
    • 2.5 mm(10)
    • 2.801 mm(24)
    • 2.901 mm(8)
    • 3.0 mm(26)
    • 3.2 mm(10)
    • 3.5 mm(14)
    • 3.7 mm(5)
    • 4.0 mm(112)
    • 4.7 mm(8)
    • 4.801 mm(2)
    • 5.0 mm(174)
    • 5.7 mm(10)
    • 6.0 mm(240)
    • 6.7 mm(8)
    • 6.801 mm(78)
    • 7.0 mm(25)
    • 7.7 mm(8)
    • 7.801 mm(16)
    • 8.0 mm(48)
    • 12.0 mm(8)
    • 16.0 mm(8)
    • 20.0 mm(26)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.012 in(2)
    • 0.016 in(2)
    • 0.02 in(4)
    • 0.024 in(4)
    • 0.028 in(2)
    • 0.031 in(4)
    • 0.039 in(16)
    • 0.047 in(2)
    • 0.06 in(20)
    • 0.067 in(2)
    • 0.079 in(37)
    • 0.083 in(3)
    • 0.095 in(6)
    • 0.098 in(10)
    • 0.11 in(24)
    • 0.114 in(8)
    • 0.119 in(26)
    • 0.126 in(10)
    • 0.138 in(14)
    • 0.146 in(5)
    • 0.157 in(112)
    • 0.185 in(8)
    • 0.189 in(2)
    • 0.197 in(174)
    • 0.224 in(10)
    • 0.237 in(240)
    • 0.264 in(8)
    • 0.268 in(78)
    • 0.276 in(25)
    • 0.303 in(8)
    • 0.307 in(16)
    • 0.315 in(48)
    • 0.473 in(8)
    • 0.63 in(8)
    • 0.787 in(26)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (176)
    • S (286)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.047 in(2)
    • 0.063 in(2)
    • 0.072 in(4)
    • 0.079 in(3)
    • 0.11 in(1)
    • 0.119 in(2)
    • 0.15 in(2)
    • 0.157 in(6)
    • 0.177 in(11)
    • 0.197 in(22)
    • 0.237 in(2)
    • 0.256 in(2)
    • 0.276 in(6)
    • 0.295 in(2)
    • 0.315 in(4)
    • 0.354 in(31)
    • 0.394 in(88)
    • 0.433 in(58)
    • 0.473 in(4)
    • 0.512 in(4)
    • 0.531 in(4)
    • 0.551 in(20)
    • 0.591 in(155)
    • 0.63 in(36)
    • 0.728 in(7)
    • 0.748 in(48)
    • 0.768 in(2)
    • 0.787 in(104)
    • 0.828 in(8)
    • 0.866 in(40)
    • 0.906 in(6)
    • 0.925 in(2)
    • 0.946 in(34)
    • 0.984 in(58)
    • 1.063 in(4)
    • 1.102 in(2)
    • 1.122 in(6)
    • 1.143 in(22)
    • 1.181 in(74)
    • 1.339 in(10)
    • 1.379 in(22)
    • 1.536 in(4)
    • 1.575 in(20)
    • 1.614 in(4)
    • 1.655 in(6)
    • 1.732 in(2)
    • 1.772 in(4)
    • 1.929 in(4)
    • 1.969 in(6)
    • 2.323 in(2)
    Maximum Bore Depth MinaMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.201 mm(2)
    • 1.6 mm(2)
    • 1.8 mm(4)
    • 2.0 mm(3)
    • 2.801 mm(1)
    • 3.0 mm(2)
    • 3.801 mm(2)
    • 4.0 mm(6)
    • 4.5 mm(11)
    • 5.0 mm(22)
    • 6.0 mm(2)
    • 6.5 mm(2)
    • 7.0 mm(6)
    • 7.5 mm(2)
    • 8.0 mm(4)
    • 9.0 mm(31)
    • 10.0 mm(88)
    • 11.0 mm(58)
    • 12.0 mm(4)
    • 13.0 mm(4)
    • 13.5 mm(4)
    • 14.0 mm(20)
    • 15.0 mm(155)
    • 16.0 mm(36)
    • 18.5 mm(7)
    • 19.0 mm(48)
    • 19.5 mm(2)
    • 20.0 mm(104)
    • 21.0 mm(8)
    • 22.0 mm(40)
    • 23.0 mm(6)
    • 23.5 mm(2)
    • 24.0 mm(34)
    • 25.0 mm(58)
    • 27.0 mm(4)
    • 28.0 mm(2)
    • 28.5 mm(6)
    • 29.0 mm(22)
    • 30.0 mm(74)
    • 34.0 mm(10)
    • 35.0 mm(22)
    • 39.0 mm(4)
    • 40.0 mm(20)
    • 41.0 mm(4)
    • 42.0 mm(6)
    • 44.0 mm(2)
    • 45.0 mm(4)
    • 49.0 mm(4)
    • 50.0 mm(6)
    • 59.0 mm(2)
    Maximum Bore Depth MinaMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (747)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.012 in(4)
    • 0.016 in(6)
    • 0.02 in(14)
    • 0.028 in(6)
    • 0.031 in(6)
    • 0.039 in(94)
    • 0.047 in(8)
    • 0.06 in(56)
    • 0.063 in(18)
    • 0.075 in(6)
    • 0.079 in(82)
    • 0.095 in(2)
    • 0.098 in(30)
    • 0.119 in(34)
    • 0.157 in(12)
    • 0.197 in(10)
    Cutting Width MinaCutting Width Max
    Cutting Width
    Cutting Width
    • 0.301 mm(4)
    • 0.4 mm(6)
    • 0.5 mm(14)
    • 0.701 mm(6)
    • 0.8 mm(6)
    • 1.0 mm(94)
    • 1.201 mm(8)
    • 1.5 mm(56)
    • 1.6 mm(18)
    • 1.901 mm(6)
    • 2.0 mm(82)
    • 2.401 mm(2)
    • 2.5 mm(30)
    • 3.0 mm(34)
    • 4.0 mm(12)
    • 5.0 mm(10)
    Cutting Width MinaCutting Width Max
    Insert Shape
    Insert Shape
    • KS_BB (15)
    • KS_BP_GA (135)
    • KS_BP_GB (20)
    • KS_BP_GC (21)
    • KS_BP_HM (57)
    • KS_BP_HP (80)
    • KS_BP_ML (37)
    • KS_MF_DB (49)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.008 in(4)
    • 0.016 in(13)
    • 0.02 in(6)
    • 0.024 in(7)
    • 0.028 in(12)
    • 0.031 in(30)
    • 0.039 in(54)
    • 0.072 in(46)
    • 0.079 in(28)
    • 0.098 in(49)
    • 0.119 in(42)
    • 0.157 in(28)
    • 0.197 in(27)
    • 0.237 in(19)
    • 0.394 in(8)
    • 0.591 in(2)
    • 0.787 in(8)
    • 0.984 in(6)
    • 1.181 in(6)
    • 1.379 in(6)
    • 1.575 in(6)
    Maximum Cutting Depth MinaMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.2 mm(4)
    • 0.4 mm(13)
    • 0.5 mm(6)
    • 0.601 mm(7)
    • 0.701 mm(12)
    • 0.8 mm(30)
    • 1.0 mm(54)
    • 1.8 mm(46)
    • 2.0 mm(28)
    • 2.5 mm(49)
    • 3.0 mm(42)
    • 4.0 mm(28)
    • 5.0 mm(27)
    • 6.0 mm(19)
    • 10.0 mm(8)
    • 15.0 mm(2)
    • 20.0 mm(8)
    • 25.0 mm(6)
    • 30.0 mm(6)
    • 35.0 mm(6)
    • 40.0 mm(6)
    Maximum Cutting Depth MinaMaximum Cutting Depth Max
    Gage Length
    Gage Length
    • 1.307 in(1)
    • 1.504 in(1)
    • 2.953 in(11)
    • 3.248 in(16)
    • 3.543 in(14)
    • 3.74 in(10)
    • 4.823 in(16)
    Gage Length
    Gage Length
    • 90 mm(14)
    • 75 mm(11)
    • 95 mm(10)
    • 33.2 mm(1)
    • 38.2 mm(1)
    • 82.5 mm(16)
    • 122.5 mm(16)
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 0.197 in(16)
    • 0.237 in(70)
    • 0.315 in(48)
    • 0.473 in(8)
    • 0.63 in(8)
    • 0.787 in(26)
    Minimum Groove Diameter MinaMinimum Groove Diameter Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 5.0 mm(16)
    • 6.0 mm(70)
    • 8.0 mm(48)
    • 12.0 mm(8)
    • 16.0 mm(8)
    • 20.0 mm(26)
    Minimum Groove Diameter MinaMinimum Groove Diameter Max
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (923)
    System Size
    System Size
    • PSC32 (1)
    • PSC40 (1)
    Back-End Diameter
    Back-End Diameter
    • 4.0 mm(313)
    • 5.0 mm(184)
    • 6.0 mm(250)
    • 7.0 mm(159)
    • 8.0 mm(66)
    • 12.0 mm(11)
    • 12.701 mm(1)
    • 15.875 mm(2)
    • 16.0 mm(20)
    • 19.05 mm(19)
    • 20.0 mm(22)
    • 22.0 mm(20)
    • 25.0 mm(21)
    • 25.401 mm(20)
    • 32.0 mm(1)
    • 40.0 mm(1)
    Back-End Diameter MinaBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.157 in(313)
    • 0.197 in(184)
    • 0.237 in(250)
    • 0.276 in(159)
    • 0.315 in(66)
    • 0.473 in(11)
    • 0.5 in(1)
    • 0.625 in(2)
    • 0.63 in(20)
    • 0.75 in(19)
    • 0.787 in(22)
    • 0.866 in(20)
    • 0.984 in(21)
    • 1.0 in(20)
    • 1.26 in(1)
    • 1.575 in(1)
    Back-End Diameter MinaBack-End Diameter Max
    No filters matching ""
    Inserts • Micro Boring Solid
    (972)

    Inserts • Micro Boring Solid

    Holders
    (165)

    Holders

    Sleeves
    (5)

    Sleeves

    Tem alguma questão a nos colocar?

    Nossa equipa qualificada  está pronta para ajudar.

    Contato Comercial
    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Digite um nome válido
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Código de catálogo ISO Classe  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk