TM721

Selecionar filtros
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (15)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (15)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (15)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (15)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (15)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (15)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (15)
  • M Stainless Steel (15)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (15)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (15)
  • K Cast Iron (15)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (15)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (15)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (15)
  • N Non-Ferrous Materials (15)
    • N1
      Wrought Aluminum (15)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (15)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (15)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (15)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (15)
    • N6
      Carbon, Graphite Composites, CFRP (15)
  • S High-Temp Alloys (15)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (15)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (15)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (15)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (15)
Applications
Applications
  • Countersinking Countersinking (15)
  • Thread Milling Thread Milling (15)
  • Threading Threading (15)
Cutting Diameter
Cutting Diameter
  • 0.185 in (1)
  • 0.189 in (1)
  • 0.242 in (1)
  • 0.256 in (1)
  • 0.264 in (1)
  • 0.301 in (1)
  • 0.323 in (1)
  • 0.354 in (1)
  • 0.39 in (1)
  • 0.409 in (1)
  • 0.41 in (1)
  • 0.457 in (1)
  • 0.465 in (1)
  • 0.477 in (1)
  • 0.516 in (1)
Cutting Diameter Min a Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 4.7 mm (1)
  • 4.801 mm (1)
  • 6.15 mm (1)
  • 6.5 mm (1)
  • 6.7 mm (1)
  • 7.65 mm (1)
  • 8.201 mm (1)
  • 9.0 mm (1)
  • 9.9 mm (1)
  • 10.351 mm (1)
  • 10.4 mm (1)
  • 11.601 mm (1)
  • 11.8 mm (1)
  • 12.101 mm (1)
  • 13.101 mm (1)
Cutting Diameter Min a Cutting Diameter Max
Type of Thread
Type of Thread
  • M (5)
  • MF (3)
  • NC/UNC (7)
Thread Size
Thread Size
  • 1/2-13 (1)
  • 1/4-20 (1)
  • 3/8-16 (1)
  • 5/16-18 (1)
  • 5/8-11 (1)
  • 7/16-14 (1)
  • 9/16-12 (1)
  • M10X1.5 (1)
  • M12X1.25 (1)
  • M12X1.75 (1)
  • M14X1.5 (1)
  • M14X2 (1)
  • M6X1 (1)
  • M8X1 (1)
  • M8X1.25 (1)
Reach
Reach
  • 0.52 in (1)
  • 0.678 in (1)
  • 0.698 in (1)
  • 0.836 in (1)
  • 0.994 in (1)
  • 1.042 in (1)
  • 1.191 in (2)
Reach Min a Reach Max
Reach
Reach
  • 13.201 mm (1)
  • 17.225 mm (1)
  • 17.7 mm (1)
  • 21.225 mm (1)
  • 25.25 mm (1)
  • 26.475 mm (1)
  • 30.25 mm (2)
Reach Min a Reach Max
Number of Flutes
Number of Flutes
  • 3 (8)
  • 4 (7)
Over All Length [L]
Over All Length [L]
  • 2.441 in (2)
  • 2.914 in (3)
  • 3.15 in (3)
  • 3.543 in (3)
  • 3.938 in (3)
  • 4.016 in (1)
Over All Length [L] Min a Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 62.0 mm (2)
  • 74.0 mm (3)
  • 80.0 mm (3)
  • 90.0 mm (3)
  • 100.0 mm (3)
  • 102.0 mm (1)
Over All Length [L] Min a Over All Length [L] Max
frontEnd
Thread TPI
Thread TPI
  • 11.0 (1)
  • 12.0 (1)
  • 13.0 (1)
  • 14.0 (1)
  • 16.0 (1)
  • 18.0 (1)
  • 20.0 (1)
Thread TPI Min a Thread TPI Max
Thread Pitch
Thread Pitch
  • 1.0 mm (2)
  • 1.25 mm (2)
  • 1.5 mm (2)
  • 1.75 mm (1)
  • 2.0 mm (1)
Thread Pitch Min a Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.039 in (2)
  • 0.049 in (2)
  • 0.06 in (2)
  • 0.069 in (1)
  • 0.079 in (1)
Thread Pitch Min a Thread Pitch Max
backEnd
Back-End Diameter
Back-End Diameter
  • 8.0 mm (2)
  • 10.0 mm (3)
  • 12.0 mm (3)
  • 14.0 mm (3)
  • 16.0 mm (3)
  • 18.0 mm (1)
Back-End Diameter Min a Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.315 in (2)
  • 0.394 in (3)
  • 0.473 in (3)
  • 0.551 in (3)
  • 0.63 in (3)
  • 0.709 in (1)
Back-End Diameter Min a Back-End Diameter Max
No filters matching ""
Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
product-image
Please adjust the following properties from

Código de catálogo ISO

Número do catálogo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Você deve ser registrado para ver as informações do seu painel
Session expired due to inactivity, please login again
Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
itens adicionados com sucesso ao carrinho
Ver o carrinho

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Código de catálogo ISO Classe    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?