Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

KM4X™

Select Filters
Filters
Filters
Filters
View filters in
Metric
Mais contatos
keyFilters
Workpiece Material
  • P Steel (171)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (171)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (171)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (171)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (171)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (171)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (171)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (171)
  • M Stainless Steel (169)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (169)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (169)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (169)
  • K Cast Iron (171)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (171)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (171)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (171)
  • N Non-Ferrous Materials (160)
    • N1
      Wrought Aluminum
      (156)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (156)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (91)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (159)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (156)
    • N6
      Carbon, Graphite Composites, CFRP
      (148)
    • N7
      MMC's
      (143)
  • S High-Temp Alloys (169)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (169)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (169)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (169)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (169)
  • H Hardened Materials (142)
    • H1
      Hardened Materials 44-48 HRC
      (142)
    • H2
      Hardened Materials 48-55 HRC
      (133)
    • H3
      Hardened Materials 56-60 HRC
      (125)
    • H4
      Hardened Materials >60 HRC
      (119)
Select First Choice
  • US (2)
Applications
  • Back Boring Back Boring (130)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (58)
  • Blind Hole Finishing Blind Hole Finishing (57)
  • Chamfer Turning Chamfer Turning (114)
  • Cut-Off Cut-Off (149)
  • Deep Grooving Deep Grooving (149)
  • Face Grooving Face Grooving (149)
  • Facing Facing (175)
  • Grooving Grooving (141)
  • ID Facing ID Facing (143)
  • ID Grooving ID Grooving (149)
  • ID Thread Turning ID Thread Turning (83)
  • Multiple Direction Cutting Multiple Direction Cutting (148)
  • OD Thread Turning OD Thread Turning (74)
  • Plunge Turning Plunge Turning (122)
  • Profiling Profiling (140)
  • TRN Boring TRN Boring (167)
  • Threading Threading (91)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (58)
  • Through Hole Finishing Through Hole Finishing (58)
  • Turning Turning (175)
Type of Thread
  • 55 (8)
  • 60 (22)
  • ACME (24)
  • API (20)
  • API BUTTRESS (4)
  • API RD (14)
  • BSPT (4)
  • BSW (16)
  • BUTTRESS (14)
  • M (16)
  • NPT (12)
  • NPTF (4)
  • RD DIN 405 (8)
  • STUB ACME (16)
  • TR DIN 103 (8)
  • UN (18)
  • UNJ (12)
Cutting Condition
  • Heavily Interrupted Cut (151)
  • Interrupted (88)
  • Lightly Interrupted Cut (151)
  • Smooth Cut (151)
  • Varying Depth of Cut (151)
Tool Cutting Edge Angle
  • 0.0 (2)
  • 45.0 (5)
  • 48.0 (5)
  • 49.683 (2)
  • 50.0 (2)
  • 72.5 (1)
  • 75.0 (17)
  • 90.0 (54)
  • 93.0 (35)
  • 95.0 (42)
  • 107.5 (10)
to
Cutting Edges Per Insert
  • 1.0 (100)
  • 2.0 (116)
  • 3.0 (34)
  • 4.0 (88)
  • 6.0 (18)
  • 8.0 (54)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (4)
  • 0.03 (3)
  • 0.038 (15)
  • 0.051 (8)
  • 0.056 (1)
  • 0.057 (4)
  • 0.066 (8)
  • 0.07 (2)
  • 0.076 (17)
  • 0.08 (9)
  • 0.081 (1)
  • 0.082 (1)
  • 0.085 (1)
  • 0.086 (1)
  • 0.089 (4)
  • 0.09 (4)
  • 0.091 (1)
  • 0.094 (8)
  • 0.097 (5)
  • 0.1 (68)
  • 0.102 (54)
  • 0.108 (1)
  • 0.116 (4)
  • 0.117 (4)
  • 0.127 (8)
  • 0.131 (8)
  • 0.132 (8)
  • 0.133 (8)
  • 0.135 (1)
  • 0.15 (8)
  • 0.152 (2)
  • 0.155 (8)
  • 0.157 (8)
  • 0.159 (1)
  • 0.16 (7)
  • 0.165 (14)
  • 0.173 (8)
  • 0.178 (9)
  • 0.19 (14)
  • 0.191 (14)
  • 0.198 (8)
  • 0.2 (76)
  • 0.202 (8)
  • 0.203 (40)
  • 0.21 (2)
  • 0.223 (1)
  • 0.224 (8)
  • 0.235 (8)
  • 0.24 (1)
  • 0.244 (4)
  • 0.25 (8)
  • 0.251 (8)
  • 0.254 (14)
  • 0.255 (4)
  • 0.269 (9)
  • 0.279 (2)
  • 0.282 (8)
  • 0.284 (8)
  • 0.3 (8)
  • 0.305 (2)
  • 0.31 (1)
  • 0.315 (11)
  • 0.318 (19)
  • 0.33 (8)
  • 0.34 (27)
  • 0.343 (10)
  • 0.356 (8)
  • 0.381 (1)
  • 0.394 (6)
  • 0.397 (94)
  • 0.4 (107)
  • 0.404 (8)
  • 0.406 (37)
  • 0.41 (17)
  • 0.43 (8)
  • 0.432 (4)
  • 0.445 (14)
  • 0.472 (4)
  • 0.49 (8)
  • 0.508 (8)
  • 0.51 (1)
  • 0.52 (1)
  • 0.533 (2)
  • 0.565 (3)
  • 0.57 (4)
  • 0.572 (18)
  • 0.575 (10)
  • 0.6 (10)
  • 0.64 (1)
  • 0.65 (1)
  • 0.7 (1)
  • 0.76 (1)
  • 0.787 (8)
  • 0.79 (7)
  • 0.792 (37)
  • 0.794 (101)
  • 0.8 (121)
  • 0.81 (17)
  • 0.826 (6)
  • 0.902 (14)
  • 0.93 (1)
  • 0.936 (1)
  • 0.97 (1)
  • 0.99 (1)
  • 1.0 (8)
  • 1.01 (1)
  • 1.188 (14)
  • 1.19 (18)
  • 1.191 (104)
  • 1.194 (8)
  • 1.195 (4)
  • 1.2 (121)
  • 1.25 (8)
  • 1.404 (1)
  • 1.5 (8)
  • 1.515 (1)
  • 1.585 (8)
  • 1.587 (18)
  • 1.588 (93)
  • 1.59 (3)
  • 1.6 (105)
  • 1.75 (8)
  • 1.98 (4)
  • 1.981 (8)
  • 2.0 (14)
  • 2.25 (14)
  • 2.38 (8)
  • 2.381 (15)
  • 2.388 (14)
  • 2.39 (3)
  • 2.4 (42)
  • 2.5 (6)
  • 3.175 (6)
  • 3.18 (9)
  • 3.2 (23)
  • 4.0 (4)
  • 6.0 (1)
  • 6.35 (2)
  • 8.0 (3)
  • 9.525 (2)
  • 10.0 (1)
  • 12.5 (1)
  • 12.7 (2)
  • 16.0 (1)
to
Corner Radius
  • 0.001 (2)
  • 0.0012 (1)
  • 0.0015 (15)
  • 0.002 (8)
  • 0.0023 (4)
  • 0.0026 (8)
  • 0.0028 (3)
  • 0.003 (17)
  • 0.0031 (9)
  • 0.0032 (2)
  • 0.0033 (1)
  • 0.0034 (1)
  • 0.0035 (4)
  • 0.0037 (8)
  • 0.0038 (5)
  • 0.0039 (1)
  • 0.004 (87)
  • 0.0043 (1)
  • 0.0046 (8)
  • 0.005 (8)
  • 0.0052 (8)
  • 0.0053 (9)
  • 0.0059 (8)
  • 0.006 (10)
  • 0.0062 (8)
  • 0.0063 (2)
  • 0.0065 (14)
  • 0.0068 (8)
  • 0.007 (9)
  • 0.0075 (14)
  • 0.0078 (10)
  • 0.0079 (6)
  • 0.008 (78)
  • 0.0083 (20)
  • 0.0088 (9)
  • 0.0093 (8)
  • 0.0094 (1)
  • 0.0096 (4)
  • 0.0099 (8)
  • 0.01 (14)
  • 0.0106 (9)
  • 0.011 (2)
  • 0.0111 (8)
  • 0.0112 (8)
  • 0.0118 (8)
  • 0.012 (2)
  • 0.0122 (1)
  • 0.0124 (8)
  • 0.0125 (19)
  • 0.013 (27)
  • 0.0135 (14)
  • 0.014 (8)
  • 0.015 (1)
  • 0.0155 (6)
  • 0.0156 (107)
  • 0.0158 (11)
  • 0.0159 (8)
  • 0.016 (85)
  • 0.017 (12)
  • 0.0175 (14)
  • 0.0186 (4)
  • 0.0193 (8)
  • 0.02 (10)
  • 0.021 (2)
  • 0.022 (1)
  • 0.0225 (18)
  • 0.025 (1)
  • 0.026 (1)
  • 0.0276 (1)
  • 0.0298 (1)
  • 0.031 (90)
  • 0.0312 (101)
  • 0.0313 (121)
  • 0.0315 (31)
  • 0.032 (17)
  • 0.0325 (6)
  • 0.0355 (14)
  • 0.0368 (1)
  • 0.0369 (1)
  • 0.038 (1)
  • 0.039 (1)
  • 0.0394 (8)
  • 0.0398 (1)
  • 0.0468 (14)
  • 0.0469 (121)
  • 0.047 (101)
  • 0.0472 (20)
  • 0.0492 (8)
  • 0.0516 (7)
  • 0.0553 (1)
  • 0.0591 (8)
  • 0.0597 (1)
  • 0.0625 (119)
  • 0.063 (82)
  • 0.0689 (8)
  • 0.078 (8)
  • 0.0787 (14)
  • 0.0886 (14)
  • 0.0928 (4)
  • 0.0938 (50)
  • 0.094 (29)
  • 0.0984 (6)
  • 0.106 (4)
  • 0.125 (17)
  • 0.126 (12)
  • 0.1563 (18)
  • 0.1575 (4)
  • 0.236 (1)
  • 0.2362 (1)
  • 0.25 (2)
  • 0.312 (19)
  • 0.315 (3)
  • 0.375 (2)
  • 0.3935 (1)
  • 0.3937 (1)
  • 0.4922 (1)
  • 0.5 (2)
  • 0.6299 (1)
  • 0.63 (1)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (77)
  • 241 (18)
  • AC5 (1)
  • CG4 (1)
  • CL4 (57)
  • CM2 (72)
  • CM3 (64)
  • CM4 (33)
  • CM5 (2)
  • CPX (80)
  • CW2 (37)
  • CW2015 (76)
  • CW5025 (80)
  • GH1 (2)
  • GX (44)
  • HCK10 (7)
  • HCK20 (1)
  • HK1500 (76)
  • HK35 (7)
  • HT2 (58)
  • HTX (37)
  • HWK15 (7)
  • K060 (33)
  • K090 (86)
  • K1 (39)
  • K1010P (2)
  • K10M (109)
  • K10P (91)
  • K10U (65)
  • K15 (3)
  • K15U (84)
  • K20K (105)
  • K21 (43)
  • K25M (72)
  • K25P (76)
  • K2885 (8)
  • K313 (142)
  • K35P (37)
  • K420 (90)
  • K45 (41)
  • K4H (8)
  • K68 (139)
  • KB1340 (27)
  • KB1345 (47)
  • KB1610 (53)
  • KB1625 (49)
  • KB1630 (47)
  • KB5610 (52)
  • KB5625 (57)
  • KB5630 (36)
  • KB9610 (78)
  • KB9640 (39)
  • KBH10 (72)
  • KBH10B (47)
  • KBH20 (77)
  • KBH20B (47)
  • KBK35 (18)
  • KC210 (70)
  • KC250 (77)
  • KC5010 (157)
  • KC5020P (8)
  • KC5025 (152)
  • KC5410 (134)
  • KC5510 (94)
  • KC5525 (65)
  • KC710 (38)
  • KC720 (110)
  • KC722 (34)
  • KC730 (130)
  • KC7310 (100)
  • KC732 (95)
  • KC8050 (139)
  • KC810 (143)
  • KC850 (159)
  • KC9010 (95)
  • KC9025 (132)
  • KC910 (132)
  • KC9105 (117)
  • KC9110 (151)
  • KC9120 (129)
  • KC9125 (137)
  • KC9125RR (11)
  • KC9140 (107)
  • KC9145 (101)
  • KC9210 (19)
  • KC9215 (92)
  • KC9225 (121)
  • KC9240 (126)
  • KC9240NEW (122)
  • KC9245 (94)
  • KC9315 (132)
  • KC9320 (128)
  • KC9325 (113)
  • KC935 (143)
  • KC950 (135)
  • KC990 (109)
  • KCD25 (35)
  • KCK05 (121)
  • KCK05B (106)
  • KCK15 (116)
  • KCK15B (125)
  • KCK20 (134)
  • KCK20B (138)
  • KCM15 (113)
  • KCM15B (111)
  • KCM25 (129)
  • KCM25B (117)
  • KCM35 (111)
  • KCM35B (82)
  • KCP05 (107)
  • KCP05B (75)
  • KCP10 (137)
  • KCP10B (142)
  • KCP15 (6)
  • KCP25 (140)
  • KCP25B (149)
  • KCP30 (128)
  • KCP30B (103)
  • KCP40 (101)
  • KCP40B (107)
  • KCPK05 (94)
  • KCS10 (39)
  • KCS10B (116)
  • KCU10 (153)
  • KCU25 (141)
  • KD050 (59)
  • KD081 (63)
  • KD100 (53)
  • KD120 (63)
  • KD1400 (52)
  • KD1405 (34)
  • KD1425 (68)
  • KM1 (36)
  • KMF (18)
  • KT1120 (16)
  • KT125 (70)
  • KT150 (43)
  • KT175 (76)
  • KT315 (113)
  • KT325 (58)
  • KTP10 (22)
  • KU10 (8)
  • KU10T (105)
  • KU25T (16)
  • KU30T (129)
  • KY1310 (51)
  • KY1320 (86)
  • KY1540 (47)
  • KY1615 (82)
  • KY2000 (49)
  • KY2100 (33)
  • KY3000 (96)
  • KY3400 (69)
  • KY3500 (90)
  • KY4000 (35)
  • KY4300 (42)
  • KY4400 (88)
  • KYK10 (43)
  • KYK25 (65)
  • KYK35 (90)
  • KYS25 (41)
  • KYS30 (51)
  • MC2 (2)
  • NL200 (37)
  • NL250 (94)
  • NL300 (85)
  • NL400 (47)
  • NL920 (73)
  • P25 (34)
  • PB100 (26)
  • PB170 (29)
  • PB250 (31)
  • PB300 (18)
  • PD100 (7)
  • PD50 (7)
  • PN120 (1)
  • PS5 (39)
  • SP0819 (73)
  • SP0A00 (7)
  • SP0PW3 (5)
  • SP3019 (61)
  • SP4019 (52)
  • SP4036 (2)
  • SP4066 (1)
  • SP4093 (2)
  • SP61EJ (7)
  • SPADAP (19)
  • SPN4W2 (4)
  • THM (63)
  • THM-X (51)
  • THMF-X (25)
  • TN10P (120)
  • TN10U (89)
  • TN15M (109)
  • TN15U (84)
  • TN2000 (85)
  • TN20K (113)
  • TN20P (117)
  • TN30M (111)
  • TN30P (94)
  • TN4000 (78)
  • TN5015 (96)
  • TN5020 (102)
  • TN5105 (83)
  • TN5120 (110)
  • TN6010 (72)
  • TN6025 (79)
  • TN7005 (71)
  • TN7010 (110)
  • TN7015 (119)
  • TN7025 (119)
  • TN7035 (102)
  • TN7105 (69)
  • TN7110 (110)
  • TN7115 (117)
  • TN7125 (111)
  • TN7135 (102)
  • TN8025 (110)
  • TTI15 (48)
  • TTM09 (24)
  • TTR (44)
  • TTR-X (4)
  • TTS (57)
  • TTX (51)
  • W00342 (13)
  • WBH10C (55)
  • WBH10P (36)
  • WBH10U (43)
  • WBH25P (36)
  • WBH25U (66)
  • WBH30P (36)
  • WBK40U (27)
  • WBK45U (58)
  • WDN00U (26)
  • WDN25U (52)
  • WK05CT (107)
  • WK15CT (73)
  • WK20CT (118)
  • WM15CT (113)
  • WM25CT (116)
  • WM35CT (94)
  • WP05CT (28)
  • WP15CT (125)
  • WP20TT (10)
  • WP25CT (125)
  • WP35CT (119)
  • WS10PT (105)
  • WS25PT (102)
  • WU10HT (93)
  • WU10PT (6)
  • WU25PT (3)
  • X00511 (18)
Wiper Insert
  • N (171)
  • Y (59)
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 1.26 (6)
  • 1.575 (12)
  • 1.626 (2)
  • 1.874 (2)
  • 1.969 (10)
  • 2.252 (2)
  • 2.48 (6)
  • 3.15 (4)
  • 3.386 (38)
  • 3.5 (2)
  • 3.9 (1)
  • 3.937 (11)
  • 4.724 (33)
  • 5.5 (2)
  • 6.874 (2)
  • 8.252 (2)
  • 8.752 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 32.0 (6)
  • 40.0 (12)
  • 41.3 (2)
  • 47.6 (2)
  • 50.0 (10)
  • 57.2 (2)
  • 63.0 (6)
  • 80.0 (4)
  • 86.0 (38)
  • 88.9 (2)
  • 100.0 (12)
  • 120.0 (33)
  • 139.7 (2)
  • 174.6 (2)
  • 209.6 (2)
  • 222.3 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (19)
to
Maximum Axial Groove Diameter
  • 393.661 (19)
to
Maximum Bore Depth
  • 70.0 (42)
  • 88.33 (6)
  • 100.0 (33)
  • 112.27 (12)
  • 113.92 (3)
  • 114.05 (7)
  • 115.0 (12)
  • 144.05 (6)
to
Maximum Bore Depth
  • 2.756 (42)
  • 3.477 (6)
  • 3.937 (33)
  • 4.42 (12)
  • 4.485 (3)
  • 4.49 (7)
  • 4.528 (12)
  • 5.671 (6)
to
frontEnd
Clamp Style
  • D (41)
  • M (33)
  • N (28)
  • P (35)
  • S (35)
  • X (3)
Adapter Front-End
  • BOEING TAPER FLANGE (1)
  • BORING BAR ADAPTER (2)
  • CARTRIDGE MOUNT (20)
  • COMBI SHELL ADAPTER (5)
  • CUTOFF SUPPORT BLADE (6)
  • END MILL ADAPTER (49)
  • ER COLLET CHUCK (19)
  • FM ADAPTER (1)
  • HTS MODULAR ADAPTER (2)
  • HYDRAULIC CHUCK (62)
  • HYDRAULIC CHUCK-SLIM LINE (8)
  • HYRAULIC CHUCK-HIGH TORQUE (9)
  • KM MODULAR ADAPTER (26)
  • REDUCER (8)
  • SCREW-ON ADAPTER (19)
  • SHELL MILL ADAPTER (76)
  • SHRINK FIT ADAPTER (96)
  • SQUARE SHANK ADAPTER (17)
  • TUNABLE SHELL MILL ADAPTER (6)
  • WHISTLE DRIVE ADAPTER (1)
  • WHISTLE NOTCH ADAPTER (24)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (44)
  • D-DIAMOND/RHOMBIC 55 (30)
  • LT-TRIANGLE LAY DOWN THREAD 60 (12)
  • R-ROUND (13)
  • S-SQUARE 90 (14)
  • T-TRIANGLE 60 (16)
  • TN-TOP NOTCH (20)
  • V-DIAMOND/RHOMBIC 35 (16)
  • W-TRIGON 80 (10)
Front End Type
  • BTF - BTF (1)
  • FDA - Milling Cutter Arbor (80)
  • FLK - Flange Adapter Kenna (1)
  • HTS - Deep Hole Index Drill (2)
  • KMS - KM TBD System (4)
  • KMT - KM Adapter (30)
  • MCS - Modular Cartridge System (20)
  • PMK - Prismatic Adapter Kenna (6)
  • SPK-Holding Arbor-Spindle Head (7)
  • SZK - Collet Taper (19)
  • VKT - Square Shank (17)
  • ZYL - Cylindrical Adapter (270)
Cutting Width
  • 1.0 (8)
  • 1.19 (4)
  • 1.194 (8)
  • 1.2 (8)
  • 1.5 (8)
  • 1.57 (8)
  • 1.575 (8)
  • 1.75 (8)
  • 1.829 (8)
  • 1.981 (8)
  • 2.0 (8)
  • 2.2 (8)
  • 2.235 (8)
  • 2.24 (4)
  • 2.25 (4)
  • 2.388 (8)
  • 2.39 (4)
  • 2.464 (8)
  • 2.5 (8)
  • 2.667 (8)
  • 2.743 (8)
  • 2.75 (8)
  • 2.794 (8)
  • 2.997 (8)
  • 3.0 (14)
  • 3.099 (8)
  • 3.17 (8)
  • 3.175 (14)
  • 3.18 (3)
  • 3.2 (14)
  • 3.25 (8)
  • 3.251 (8)
  • 3.32 (4)
  • 3.329 (4)
  • 3.5 (14)
  • 3.607 (8)
  • 3.96 (8)
  • 3.962 (8)
  • 3.974 (4)
  • 3.988 (8)
  • 4.0 (14)
  • 4.24 (4)
  • 4.242 (14)
  • 4.25 (4)
  • 4.3 (8)
  • 4.5 (14)
  • 4.521 (8)
  • 4.699 (11)
  • 4.775 (14)
  • 4.78 (3)