Sugestões de produtos

Product Family suggestions

adicionado com sucesso ao carrinho
Ver o carrinho

Notificações

Marcar todas como lidas

Canal e corte

Selecionar filtros
Filters
Filtros
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (3550)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3550)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3550)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (3550)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (3550)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (3550)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (3550)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (3550)
  • M Stainless Steel (3118)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (3118)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (3118)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (3118)
  • K Cast Iron (3503)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (3503)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (3483)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (3471)
  • N Non-Ferrous Materials (3279)
    • N1
      Wrought Aluminum
      (3271)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (3078)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (369)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (3279)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (3086)
    • N6
      Carbon, Graphite Composites, CFRP
      (3078)
    • N7
      MMC's
      (361)
  • S High-Temp Alloys (3315)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (3315)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (3315)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (3315)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (3285)
  • H Hardened Materials (2056)
    • H1
      Hardened Materials 44-48 HRC
      (2056)
    • H2
      Hardened Materials 48-55 HRC
      (1811)
    • H3
      Hardened Materials 56-60 HRC
      (341)
    • H4
      Hardened Materials >60 HRC
      (341)
Selecione First Choice
  • BR (62)
  • CN (461)
  • DE (488)
  • GB (277)
  • IN (134)
  • SG (227)
  • US (584)
Applications
Applications
  • Back Boring Back Boring (143)
  • Boring Boring (1466)
  • CRT Profiling CRT Profiling (2)
  • Cut-Off Cut-Off (1171)
  • Deep Grooving Deep Grooving (72)
  • Drilling Drilling (1)
  • Face Grooving Face Grooving (3133)
  • Facing Facing (297)
  • Grooving Grooving (3491)
  • ID Facing ID Facing (283)
  • ID Grooving ID Grooving (2389)
  • ID Thread Turning ID Thread Turning (109)
  • Multiple Direction Cutting Multiple Direction Cutting (499)
  • OD Thread Turning OD Thread Turning (127)
  • Plunge Turning Plunge Turning (2289)
  • Profiling Profiling (363)
  • TRN Boring TRN Boring (44)
  • Threading Threading (130)
  • Turning Turning (1578)
Cutting Length
Cutting Length
  • 26.0 mm (1)
  • 32.0 mm (3)
Cutting Length Min a Cutting Length Max
Cutting Length
Cutting Length
  • 1.024 in (1)
  • 1.26 in (3)
Cutting Length Min a Cutting Length Max
Type of Thread
Type of Thread
  • 60 (188)
  • ACME (123)
  • API (115)
  • API RD (87)
  • BSW (79)
  • BUTTRESS (183)
  • M (115)
  • NPT (79)
  • STUB ACME (79)
  • UN (183)
  • UNJ (79)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (3050)
  • Lightly Interrupted Cut (3203)
  • Smooth Cut (3703)
  • Varying Depth of Cut (3506)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (20)
  • 90.0 (1406)
  • 92.25 (27)
Tool Cutting Edge Angle Min a Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (7)
  • Boring Bar Shank (186)
  • Cutoff Support Blade A1-A3 (80)
  • Toolholder (802)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (1900)
  • 2.0 (2263)
Cutting Edges Per Insert Min a Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (27)
  • 0.002 in (79)
  • 0.003 in (193)
  • 0.004 in (319)
  • 0.005 in (79)
  • 0.006 in (171)
  • 0.007 in (202)
  • 0.008 in (2025)
  • 0.01 in (179)
  • 0.011 in (79)
  • 0.012 in (433)
  • 0.014 in (202)
  • 0.015 in (1)
  • 0.016 in (1307)
  • 0.017 in (79)
  • 0.019 in (115)
  • 0.02 in (158)
  • 0.023 in (318)
  • 0.03 in (70)
  • 0.031 in (1076)
  • 0.033 in (13)
  • 0.034 in (52)
  • 0.035 in (115)
  • 0.039 in (339)
  • 0.041 in (172)
  • 0.046 in (30)
  • 0.047 in (464)
  • 0.048 in (18)
  • 0.049 in (148)
  • 0.06 in (477)
  • 0.061 in (233)
  • 0.062 in (93)
  • 0.063 in (558)
  • 0.065 in (231)
  • 0.069 in (148)
  • 0.078 in (94)
  • 0.079 in (361)
  • 0.08 in (59)
  • 0.081 in (189)
  • 0.089 in (115)
  • 0.094 in (244)
  • 0.095 in (160)
  • 0.096 in (188)
  • 0.098 in (263)
  • 0.099 in (50)
  • 0.1 in (178)
  • 0.109 in (1)
  • 0.119 in (180)
  • 0.12 in (184)
  • 0.125 in (250)
  • 0.128 in (134)
  • 0.156 in (52)
  • 0.157 in (52)
  • 0.158 in (56)
  • 0.159 in (37)
  • 0.187 in (12)
  • 0.188 in (13)
  • 0.197 in (14)
  • 0.198 in (16)
Corner Radius Min a Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (27)
  • 0.05 mm (79)
  • 0.076 mm (193)
  • 0.1 mm (319)
  • 0.125 mm (79)
  • 0.151 mm (171)
  • 0.176 mm (202)
  • 0.2 mm (2025)
  • 0.225 mm (79)
  • 0.25 mm (179)
  • 0.275 mm (79)
  • 0.301 mm (433)
  • 0.325 mm (202)
  • 0.351 mm (115)
  • 0.375 mm (1)
  • 0.4 mm (1307)
  • 0.426 mm (79)
  • 0.45 mm (115)
  • 0.476 mm (40)
  • 0.5 mm (158)
  • 0.576 mm (318)
  • 0.75 mm (70)
  • 0.775 mm (210)
  • 0.8 mm (866)
  • 0.826 mm (13)
  • 0.851 mm (52)
  • 0.9 mm (115)
  • 1.0 mm (339)
  • 1.05 mm (172)
  • 1.175 mm (30)
  • 1.201 mm (464)
  • 1.225 mm (18)
  • 1.25 mm (148)
  • 1.5 mm (469)
  • 1.526 mm (75)
  • 1.55 mm (233)
  • 1.576 mm (93)
  • 1.6 mm (558)
  • 1.651 mm (231)
  • 1.75 mm (148)
  • 1.975 mm (94)
  • 2.0 mm (361)
  • 2.025 mm (59)
  • 2.051 mm (189)
  • 2.25 mm (115)
  • 2.375 mm (244)
  • 2.401 mm (160)
  • 2.45 mm (188)
  • 2.5 mm (263)
  • 2.526 mm (50)
  • 2.551 mm (178)
  • 2.776 mm (1)
  • 3.0 mm (180)
  • 3.026 mm (46)
  • 3.051 mm (138)
  • 3.176 mm (250)
  • 3.25 mm (134)
  • 3.95 mm (35)
  • 3.975 mm (17)
  • 4.0 mm (52)
  • 4.025 mm (56)
  • 4.05 mm (37)
  • 4.75 mm (12)
  • 4.775 mm (13)
  • 5.0 mm (14)
  • 5.025 mm (16)
Corner Radius Min a Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (3117)
Corner Chamfer Min a Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (3117)
Corner Chamfer Min a Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (1589)
  • Lightly Interrupted Cut (1742)
  • Smooth Cut (2242)
  • Varying Depth of Cut (2045)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K1 (5)
  • K1025 (107)
  • K2885 (147)
  • K313 (1439)
  • K420 (217)
  • K4H (111)
  • K68 (304)
  • KB1345 (115)
  • KB1630 (335)
  • KB5625 (279)
  • KBH20 (246)
  • KC250 (152)
  • KC5010 (712)
  • KC5025 (830)
  • KC5410 (187)
  • KC710 (183)
  • KC720 (214)
  • KC722 (183)
  • KC730 (418)
  • KC732 (79)
  • KC810 (199)
  • KC850 (341)
  • KC910 (111)
  • KC9110 (467)
  • KC9120 (79)
  • KC9125 (284)
  • KC9320 (183)
  • KC935 (183)
  • KC950 (183)
  • KCK20 (387)
  • KCK20B (1126)
  • KCM35B (727)
  • KCP10 (316)
  • KCP10B (1188)
  • KCP25 (318)
  • KCP25B (1244)
  • KCU10 (1798)
  • KCU25 (2124)
  • KD050 (40)
  • KD081 (79)
  • KD100 (98)
  • KD120 (115)
  • KD1405 (165)
  • KD1425 (87)
  • KMF (31)
  • KMS (109)
  • KT175 (147)
  • KT315 (492)
  • KU10 (283)
  • KU10T (183)
  • KU25T (183)
  • KU30T (383)
  • KY3000 (115)
  • KY3500 (240)
  • KY4300 (6)
  • KYS30 (101)
  • SP88F8 (39)
Hand Of Tool
Hand Of Tool
  • L (483)
  • N (54)
  • N - Neutral (3)
  • R (535)
Wiper Insert
Wiper Insert
  • N (3862)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (147)
  • 11.175 mm (2)
  • 11.5 mm (2)
  • 15.875 mm (4)
  • 16.0 mm (8)
  • 17.0 mm (3)
  • 18.5 mm (2)
  • 18.55 mm (4)
  • 20.0 mm (18)
  • 20.326 mm (1)
  • 21.0 mm (3)
  • 22.0 mm (3)
  • 25.0 mm (31)
  • 25.401 mm (6)
  • 26.0 mm (11)
  • 28.576 mm (4)
  • 30.0 mm (8)
  • 31.75 mm (6)
  • 32.0 mm (17)
  • 33.0 mm (4)
  • 34.0 mm (4)
  • 34.926 mm (6)
  • 35.0 mm (8)
  • 36.0 mm (5)
  • 38.0 mm (1)
  • 38.1 mm (8)
  • 40.0 mm (27)
  • 41.0 mm (4)
  • 41.301 mm (57)
  • 42.0 mm (5)
  • 44.0 mm (6)
  • 44.45 mm (2)
  • 47.6 mm (56)
  • 48.0 mm (3)
  • 50.0 mm (34)
  • 50.801 mm (2)
  • 52.0 mm (14)
  • 54.0 mm (4)
  • 55.875 mm (3)
  • 56.625 mm (49)
  • 57.151 mm (6)
  • 57.2 mm (29)
  • 58.0 mm (4)
  • 60.0 mm (56)
  • 60.325 mm (4)
  • 63.5 mm (23)
  • 64.0 mm (4)
  • 65.0 mm (1)
  • 68.0 mm (4)
  • 69.851 mm (4)
  • 70.0 mm (8)
  • 75.0 mm (59)
  • 76.2 mm (8)
  • 80.0 mm (11)
  • 82.551 mm (4)
  • 88.9 mm (535)
  • 90.0 mm (8)
  • 92.0 mm (3)
  • 100.0 mm (72)
  • 120.0 mm (12)
  • 127.0 mm (1)
  • 130.0 mm (4)
  • 132.0 mm (4)
  • 139.701 mm (728)
  • 146.05 mm (3)
  • 174.601 mm (125)
  • 180.0 mm (72)
  • 184.0 mm (3)
  • 200.0 mm (8)
  • 209.601 mm (236)
  • 222.3 mm (58)
  • 250.0 mm (72)
  • 290.0 mm (7)
  • 333.0 mm (4)
  • 350.0 mm (66)
Minimum Axial Groove Diameter Min a Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (147)
  • 0.44 in (2)
  • 0.453 in (2)
  • 0.625 in (4)
  • 0.63 in (8)
  • 0.669 in (3)
  • 0.728 in (2)
  • 0.73 in (4)
  • 0.787 in (18)
  • 0.8 in (1)
  • 0.828 in (3)
  • 0.866 in (3)
  • 0.984 in (31)
  • 1.0 in (6)
  • 1.024 in (11)
  • 1.125 in (4)
  • 1.181 in (8)
  • 1.25 in (6)
  • 1.26 in (17)
  • 1.299 in (4)
  • 1.339 in (4)
  • 1.375 in (6)
  • 1.379 in (8)
  • 1.417 in (5)
  • 1.496 in (1)
  • 1.5 in (8)
  • 1.575 in (27)
  • 1.614 in (4)
  • 1.627 in (57)
  • 1.655 in (5)
  • 1.732 in (6)
  • 1.75 in (2)
  • 1.874 in (56)
  • 1.891 in (3)
  • 1.969 in (34)
  • 2.0 in (2)
  • 2.047 in (14)
  • 2.126 in (4)
  • 2.2 in (3)
  • 2.229 in (49)
  • 2.25 in (6)
  • 2.253 in (29)
  • 2.283 in (4)
  • 2.362 in (56)
  • 2.375 in (4)
  • 2.5 in (23)
  • 2.52 in (4)
  • 2.559 in (1)
  • 2.677 in (4)
  • 2.75 in (4)
  • 2.757 in (8)
  • 2.953 in (59)
  • 3.0 in (8)
  • 3.15 in (11)
  • 3.25 in (4)
  • 3.5 in (535)
  • 3.543 in (8)
  • 3.622 in (3)
  • 3.938 in (72)
  • 4.724 in (12)
  • 5.0 in (1)
  • 5.118 in (4)
  • 5.197 in (4)
  • 5.5 in (728)
  • 5.75 in (3)
  • 6.875 in (125)
  • 7.087 in (72)
  • 7.244 in (3)
  • 7.875 in (8)
  • 8.252 in (236)
  • 8.752 in (58)
  • 9.843 in (72)
  • 11.417 in (7)
  • 13.11 in (4)
  • 13.781 in (66)
Minimum Axial Groove Diameter Min a Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.787 in (32)
  • 0.828 in (3)
  • 0.906 in (1)
  • 0.984 in (6)
  • 1.024 in (10)
  • 1.063 in (9)
  • 1.102 in (7)
  • 1.181 in (7)
  • 1.26 in (40)
  • 1.339 in (8)
  • 1.379 in (12)
  • 1.417 in (13)
  • 1.496 in (1)
  • 1.575 in (8)
  • 1.655 in (37)
  • 1.811 in (1)
  • 1.891 in (4)
  • 1.969 in (21)
  • 2.047 in (24)
  • 2.126 in (2)
  • 2.283 in (4)
  • 2.362 in (31)
  • 2.441 in (29)
  • 2.52 in (14)
  • 2.598 in (12)
  • 2.835 in (3)
  • 2.914 in (3)
  • 2.953 in (50)
  • 3.15 in (4)
  • 3.228 in (4)
  • 3.307 in (4)
  • 3.701 in (4)
  • 3.938 in (67)
  • 4.409 in (4)
  • 4.882 in (3)
  • 5.354 in (4)
  • 5.906 in (3)
  • 6.299 in (4)
  • 7.087 in (73)
  • 7.875 in (2)
  • 8.346 in (3)
  • 9.843 in (68)
  • 10.0 in (4)
  • 11.811 in (12)
  • 13.781 in (66)
  • 39.331 in (81)
  • 393.661 in (1825)
Maximum Axial Groove Diameter Min a Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 20.0 mm (32)
  • 21.0 mm (3)
  • 23.0 mm (1)
  • 25.0 mm (6)
  • 26.0 mm (10)
  • 27.0 mm (9)
  • 28.0 mm (7)
  • 30.0 mm (7)
  • 32.0 mm (40)
  • 34.0 mm (8)
  • 35.0 mm (12)
  • 36.0 mm (13)
  • 38.0 mm (1)
  • 40.0 mm (8)
  • 42.0 mm (37)
  • 46.0 mm (1)
  • 48.0 mm (4)
  • 50.0 mm (21)
  • 52.0 mm (24)
  • 54.0 mm (2)
  • 58.0 mm (4)
  • 60.0 mm (31)
  • 62.0 mm (29)
  • 64.0 mm (14)
  • 66.0 mm (12)
  • 72.0 mm (3)
  • 74.0 mm (3)
  • 75.0 mm (50)
  • 80.0 mm (4)
  • 82.0 mm (4)
  • 84.0 mm (4)
  • 94.0 mm (4)
  • 100.0 mm (67)
  • 112.0 mm (4)
  • 124.0 mm (3)
  • 136.0 mm (4)
  • 150.0 mm (3)
  • 160.0 mm (4)
  • 180.0 mm (73)
  • 200.0 mm (2)
  • 212.0 mm (3)
  • 250.0 mm (68)
  • 254.0 mm (4)
  • 300.0 mm (12)
  • 350.0 mm (66)
  • 999.0 mm (81)
  • 9999.0 mm (1825)
Maximum Axial Groove Diameter Min a Maximum Axial Groove Diameter Max
Countersunk Angle
Countersunk Angle
  • 20.0 (3)
  • 45.0 (7)
Countersunk Angle Min a Countersunk Angle Max
Cutting Direction
Cutting Direction
  • B (8)
  • E (910)
  • S (157)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (284)
  • NEUTRAL (ZERO) (248)
  • POSITIVE-ZERO (137)
Maximum Bore Depth
Maximum Bore Depth
  • 0.946 in (4)
  • 1.0 in (14)
  • 1.23 in (1)
  • 1.232 in (1)