Cortar
Filtros
Filtros
Exibir filtros em
MétricoPolegada
Workpiece Material
Workpiece Material
- P Steel (1619)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1619)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1619)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1619)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1619)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1619)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1619)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1619)
- M Stainless Steel (1575)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1575)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1575)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1575)
- K Cast Iron (1441)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1432)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1441)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1420)
- N Non-Ferrous Materials (1503)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1502)
- N7MMC's (107)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (1503)
- N6Carbon, Graphite Composites, CFRP (1502)
- N1Wrought Aluminum (1503)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1502)
- N3High-Silicon Aluminum Alloys Si >12.2%(107)
- S High-Temp Alloys (1572)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1572)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1572)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1559)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1572)
- H Hardened Materials (807)
- H1Hardened Materials 44-48 HRC(807)
- H4Hardened Materials >60 HRC(151)
- H2Hardened Materials 48-55 HRC(749)
- H3Hardened Materials 56-60 HRC(151)
Selecione First Choice
- BR (60)
- CN (378)
- DE (407)
- GB (232)
- IN (112)
- SG (187)
- US (483)
Applications
Applications
Back Boring (112)
Boring (491)
CRT Profiling (2)
Chamfer Turning (69)
Cut-Off (1080)
Deep Grooving (141)
Face Grooving (736)
Facing (247)
Grooving (1280)
ID Facing (112)
ID Grooving (609)
Multiple Direction Cutting (297)
Plunge Turning (476)
Turning (370)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (8)
- 90.0 (677)
a
Connection Style
Connection Style
- Cutoff Support Blade A1-A3 (88)
- Toolholder (497)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (987)
- 2.0 (935)
a
Over All Length [L]
Over All Length [L]
- 0.7952 in(1)
- 0.992 in(2)
- 1.88 in(10)
- 1.954 in(4)
- 2.037 in(8)
- 2.111 in(5)
- 2.155 in(4)
- 2.156 in(4)
- 2.19 in(2)
- 2.273 in(4)
- 2.342 in(1)
- 2.347 in(9)
- 2.352 in(1)
- 2.4309 in(2)
- 2.431 in(4)
- 2.583 in(2)
- 2.667 in(4)
- 2.9528 in(2)
- 3.0709 in(4)
- 3.3858 in(11)
- 3.396 in(2)
- 3.5433 in(8)
- 3.5512 in(2)
- 3.553 in(4)
- 3.9449 in(1)
- 4.3307 in(18)
- 4.331 in(2)
- 4.3386 in(2)
- 4.34 in(1)
- 4.3404 in(2)
- 4.3406 in(13)
- 4.341 in(17)
- 4.3425 in(1)
- 4.5 in(114)
- 4.921 in(86)
- 4.9213 in(63)
- 4.9214 in(1)
- 4.9234 in(1)
- 4.931 in(4)
- 4.9311 in(4)
- 4.9331 in(5)
- 4.934 in(2)
- 5.0 in(24)
- 5.118 in(2)
- 5.1181 in(4)
- 5.315 in(3)
- 5.3267 in(2)
- 5.3486 in(2)
- 5.372 in(4)
- 5.3939 in(4)
- 5.463 in(4)
- 5.508 in(12)
- 5.905 in(1)
- 5.9055 in(34)
- 5.906 in(49)
- 5.9114 in(1)
- 5.913 in(1)
- 5.9134 in(2)
- 5.915 in(16)
- 5.9152 in(2)
- 5.9153 in(3)
- 5.9154 in(2)
- 5.9173 in(6)
- 5.918 in(2)
- 5.961 in(10)
- 6.0 in(129)
- 6.1141 in(2)
- 6.136 in(2)
- 6.25 in(4)
- 6.3721 in(2)
- 6.3939 in(2)
- 6.6929 in(10)
- 6.693 in(27)
- 6.703 in(4)
- 7.0 in(13)
- 7.874 in(6)
- 10.236 in(2)
- 10.242 in(1)
a
Over All Length [L]
Over All Length [L]
- 20.198 mm(1)
- 25.198 mm(2)
- 47.75 mm(10)
- 49.62 mm(4)
- 51.75 mm(8)
- 53.62 mm(5)
- 54.75 mm(7)
- 54.751 mm(1)
- 55.62 mm(2)
- 57.75 mm(4)
- 59.5 mm(1)
- 59.62 mm(9)
- 59.75 mm(1)
- 61.746 mm(2)
- 61.75 mm(4)
- 65.62 mm(2)
- 67.75 mm(4)
- 75.0 mm(2)
- 78.0 mm(4)
- 86.0 mm(11)
- 86.25 mm(2)
- 90.0 mm(8)
- 90.2 mm(2)
- 90.25 mm(4)
- 100.2 mm(1)
- 110.0 mm(20)
- 110.2 mm(2)
- 110.25 mm(32)
- 110.251 mm(1)
- 110.3 mm(1)
- 114.3 mm(114)
- 125.0 mm(153)
- 125.25 mm(8)
- 125.3 mm(5)
- 127.0 mm(24)
- 130.0 mm(6)
- 135.0 mm(3)
- 135.299 mm(2)
- 135.855 mm(2)
- 136.449 mm(4)
- 137.004 mm(4)
- 138.75 mm(4)
- 139.9 mm(11)
- 139.903 mm(1)
- 150.0 mm(86)
- 150.15 mm(1)
- 150.2 mm(3)
- 150.245 mm(2)
- 150.248 mm(1)
- 150.25 mm(18)
- 150.251 mm(2)
- 150.3 mm(6)
- 151.4 mm(10)
- 152.4 mm(129)
- 155.299 mm(2)
- 155.855 mm(2)
- 158.75 mm(4)
- 161.852 mm(2)
- 162.404 mm(2)
- 170.0 mm(37)
- 170.25 mm(4)
- 177.8 mm(13)
- 200.0 mm(6)
- 260.0 mm(2)
- 260.15 mm(1)
a
Corner Radius
Corner Radius
- 0.0 in(27)
- 0.004 in(51)
- 0.006 in(90)
- 0.008 in(801)
- 0.012 in(196)
- 0.016 in(659)
- 0.031 in(465)
- 0.039 in(142)
- 0.041 in(140)
- 0.046 in(22)
- 0.047 in(210)
- 0.048 in(18)
- 0.059 in(138)
- 0.06 in(55)
- 0.061 in(80)
- 0.063 in(133)
- 0.065 in(80)
- 0.079 in(110)
- 0.08 in(40)
- 0.081 in(69)
- 0.094 in(107)
- 0.096 in(69)
- 0.098 in(92)
- 0.099 in(42)
- 0.1 in(47)
- 0.118 in(90)
- 0.119 in(45)
- 0.12 in(42)
- 0.125 in(88)
- 0.128 in(42)
- 0.156 in(38)
- 0.157 in(44)
- 0.158 in(46)
- 0.159 in(22)
- 0.188 in(10)
- 0.197 in(12)
- 0.198 in(15)
a
Corner Radius
Corner Radius
- 0.0 mm(27)
- 0.1 mm(51)
- 0.15 mm(90)
- 0.2 mm(801)
- 0.3 mm(196)
- 0.4 mm(659)
- 0.8 mm(465)
- 1.0 mm(142)
- 1.05 mm(140)
- 1.175 mm(22)
- 1.2 mm(210)
- 1.225 mm(18)
- 1.5 mm(138)
- 1.525 mm(55)
- 1.55 mm(80)
- 1.6 mm(133)
- 1.65 mm(80)
- 2.0 mm(110)
- 2.025 mm(40)
- 2.05 mm(69)
- 2.375 mm(107)
- 2.45 mm(69)
- 2.5 mm(92)
- 2.525 mm(42)
- 2.55 mm(47)
- 3.0 mm(90)
- 3.025 mm(45)
- 3.05 mm(42)
- 3.175 mm(88)
- 3.25 mm(42)
- 3.95 mm(22)
- 3.975 mm(16)
- 4.0 mm(44)
- 4.025 mm(46)
- 4.05 mm(22)
- 4.775 mm(10)
- 5.0 mm(12)
- 5.025 mm(15)
a
Corner Chamfer
Corner Chamfer
- 0.0 mm(1228)
a
Corner Chamfer
Corner Chamfer
- 0.0 in(1228)
a
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (554)
- KB1630 (147)
- KBH20 (142)
- KC5010 (265)
- KC5025 (409)
- KC9125 (30)
- KCK20 (166)
- KCK20B (385)
- KCM35B (332)
- KCP10 (239)
- KCP10B (385)
- KCP25 (240)
- KCP25B (385)
- KCP25C (385)
- KCS10B (295)
- KCU10 (692)
- KCU10B (704)
- KCU25 (999)
- KCU25B (1019)
- KD1405 (107)
- KMF (31)
- KMS (43)
- KT315 (236)
- KY3500 (164)
- KYS30 (83)
Hand Of Tool
Hand Of Tool
- L (282)
- N (52)
- N - Neutral (3)
- R (300)
Wiper Insert
Wiper Insert
- N (1799)
F Dimension
F Dimension
- 1.25 mm(3)
- 1.275 mm(3)
- 1.45 mm(2)
- 1.825 mm(10)
- 2.7 mm(3)
- 3.7 mm(2)
- 5.475 mm(6)
- 5.975 mm(6)
- 7.95 mm(3)
- 9.53 mm(6)
- 9.627 mm(2)
- 10.0 mm(6)
- 10.125 mm(1)
- 11.99 mm(2)
- 12.0 mm(16)
- 12.02 mm(2)
- 12.09 mm(2)
- 12.1 mm(2)
- 12.125 mm(1)
- 12.14 mm(2)
- 12.17 mm(2)
- 12.2 mm(4)
- 12.22 mm(1)
- 12.36 mm(4)
- 12.7 mm(18)
- 12.72 mm(2)
- 12.74 mm(2)
- 12.79 mm(2)
- 12.8 mm(2)
- 12.802 mm(2)
- 12.85 mm(4)
- 12.929 mm(2)
- 15.88 mm(8)
- 15.92 mm(1)
- 15.97 mm(6)
- 16.0 mm(8)
- 16.02 mm(5)
- 16.09 mm(2)
- 16.1 mm(1)
- 16.14 mm(4)
- 16.2 mm(7)
- 16.22 mm(2)
- 16.36 mm(2)
- 19.03 mm(1)
- 19.05 mm(8)
- 19.08 mm(13)
- 19.084 mm(5)
- 19.101 mm(1)
- 19.13 mm(20)
- 19.134 mm(6)
- 19.152 mm(1)
- 19.23 mm(4)
- 19.234 mm(3)
- 19.406 mm(4)
- 20.0 mm(8)
- 20.06 mm(16)
- 20.1 mm(3)
- 20.11 mm(34)
- 20.2 mm(15)
- 20.21 mm(6)
- 20.25 mm(1)
- 20.3 mm(2)
- 20.36 mm(4)
- 25.06 mm(16)
- 25.11 mm(32)
- 25.2 mm(6)
- 25.21 mm(8)
- 25.3 mm(4)
- 25.335 mm(2)
- 25.34 mm(2)
- 25.36 mm(1)
- 25.43 mm(16)
- 25.48 mm(24)
- 25.484 mm(5)
- 25.485 mm(2)
- 25.499 mm(1)
- 25.58 mm(4)
- 25.584 mm(3)
- 25.71 mm(5)
- 25.756 mm(4)
- 26.0 mm(2)
- 31.0 mm(2)
- 31.497 mm(3)
- 31.75 mm(1)
- 31.83 mm(12)
- 31.93 mm(4)
- 32.06 mm(4)
- 32.08 mm(12)
- 32.18 mm(4)
- 32.31 mm(4)
- 32.41 mm(2)
- 32.66 mm(2)
- 38.28 mm(2)
- 38.41 mm(2)
- 38.76 mm(2)
- 40.18 mm(2)
- 40.31 mm(2)
- 40.66 mm(2)
a
F Dimension
F Dimension
- 0.0492 in(3)
- 0.05 in(2)
- 0.057 in(2)
- 0.0715 in(1)
- 0.0719 in(5)
- 0.072 in(4)
- 0.106 in(3)
- 0.146 in(2)
- 0.2155 in(1)
- 0.2156 in(5)
- 0.2353 in(6)
- 0.2982 in(1)
- 0.313 in(3)
- 0.375 in(6)
- 0.379 in(2)
- 0.394 in(6)
- 0.399 in(1)
- 0.472 in(18)
- 0.473 in(2)
- 0.476 in(2)
- 0.4764 in(2)
- 0.477 in(1)
- 0.478 in(2)
- 0.4791 in(2)
- 0.48 in(3)
- 0.4803 in(1)
- 0.4811 in(1)
- 0.4866 in(4)
- 0.5 in(18)
- 0.501 in(2)
- 0.5016 in(2)
- 0.5035 in(2)
- 0.504 in(4)
- 0.5059 in(2)
- 0.506 in(2)
- 0.509 in(2)
- 0.625 in(8)
- 0.6268 in(1)
- 0.6287 in(4)
- 0.629 in(2)
- 0.63 in(9)
- 0.6307 in(1)
- 0.631 in(4)
- 0.633 in(2)
- 0.635 in(4)
- 0.637 in(1)
- 0.6378 in(6)
- 0.6386 in(2)
- 0.6441 in(2)
- 0.7492 in(1)
- 0.75 in(8)
- 0.751 in(10)
- 0.7512 in(3)
- 0.7513 in(5)
- 0.752 in(1)
- 0.753 in(20)
- 0.7533 in(6)
- 0.754 in(1)
- 0.757 in(4)
- 0.7572 in(3)
- 0.764 in(4)
- 0.787 in(8)
- 0.7898 in(6)
- 0.79 in(10)
- 0.7913 in(3)
- 0.7917 in(14)
- 0.792 in(20)
- 0.7953 in(15)
- 0.7957 in(2)
- 0.796 in(4)
- 0.7972 in(1)
- 0.7992 in(2)
- 0.8016 in(4)
- 0.9866 in(4)
- 0.987 in(12)
- 0.9886 in(8)
- 0.989 in(24)
- 0.9921 in(6)
- 0.9925 in(4)
- 0.993 in(4)
- 0.996 in(2)
- 0.9961 in(2)
- 0.997 in(2)
- 0.9974 in(2)
- 0.9984 in(1)
- 1.001 in(12)
- 1.0012 in(4)
- 1.003 in(24)
- 1.0033 in(7)
- 1.0039 in(1)
- 1.007 in(4)
- 1.0072 in(3)
- 1.012 in(2)
- 1.0122 in(3)
- 1.014 in(4)
- 1.0236 in(2)
- 1.2205 in(2)
- 1.24 in(3)
- 1.25 in(1)
- 1.253 in(12)
- 1.257 in(4)
- 1.262 in(4)
- 1.263 in(12)
- 1.267 in(4)
- 1.272 in(4)
- 1.276 in(2)
- 1.286 in(2)
- 1.507 in(2)
- 1.512 in(2)
- 1.526 in(2)
- 1.582 in(2)
- 1.587 in(2)
- 1.601 in(2)
a
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.787 in(28)
- 0.7874 in(6)
- 0.79 in(6)
- 1.024 in(8)
- 1.063 in(9)
- 1.102 in(4)
- 1.1024 in(3)
- 1.1811 in(4)
- 1.26 in(40)
- 1.3386 in(5)
- 1.339 in(3)
- 1.378 in(3)
- 1.4961 in(1)
- 1.65 in(1)
- 1.6535 in(5)
- 1.654 in(33)
- 1.772 in(2)
- 2.047 in(21)
- 2.0472 in(9)
- 2.05 in(2)
- 2.44 in(6)
- 2.4409 in(4)
- 2.441 in(29)
- 2.52 in(11)
- 2.56 in(2)
- 2.5984 in(12)
- 3.1496 in(4)
- 3.228 in(4)
a
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(34)
- 20.066 mm(6)
- 26.0 mm(8)
- 27.0 mm(9)
- 28.0 mm(7)
- 30.0 mm(4)
- 32.0 mm(40)
- 34.0 mm(8)
- 35.0 mm(3)
- 38.0 mm(1)
- 41.91 mm(1)
- 42.0 mm(38)
- 45.0 mm(2)
- 52.0 mm(30)
- 52.07 mm(2)
- 61.976 mm(6)
- 62.0 mm(33)
- 63.0 mm(2)
- 64.0 mm(11)
- 66.0 mm(12)
- 80.0 mm(4)
- 82.0 mm(4)
a
Cutting Direction
Cutting Direction
- B (8)
- E (629)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (71)
- POSITIVE-ZERO (206)
frontEnd
Adapter Front-End
Adapter Front-End
- CARTRIDGE MOUNT (87)
- SQUARE SHANK ADAPTER (20)
Clamp Style
Clamp Style
- C (54)
- S (38)
- Y (569)
Cutting Width
Cutting Width
- 0.055 in(65)
- 0.0551 in(28)
- 0.059 in(20)
- 0.061 in(14)
- 0.063 in(65)
- 0.078 in(50)
- 0.0787 in(106)
- 0.0788 in(94)
- 0.079 in(185)
- 0.083 in(88)
- 0.084 in(166)
- 0.087 in(62)
- 0.094 in(100)
- 0.098 in(9)
- 0.099 in(88)
- 0.103 in(6)
- 0.118 in(278)
- 0.1181 in(92)
- 0.119 in(44)
- 0.12 in(45)
- 0.1201 in(35)
- 0.122 in(96)
- 0.123 in(188)
- 0.125 in(160)
- 0.13 in(80)
- 0.157 in(156)
- 0.1574 in(73)
- 0.1575 in(115)
- 0.158 in(141)
- 0.159 in(9)
- 0.1594 in(15)
- 0.161 in(130)
- 0.162 in(156)
- 0.187 in(118)
- 0.1875 in(107)
- 0.192 in(69)
- 0.1968 in(49)
- 0.197 in(146)
- 0.198 in(31)
- 0.201 in(43)
- 0.202 in(130)
- 0.236 in(131)
- 0.2362 in(42)
- 0.241 in(139)
- 0.25 in(103)
- 0.255 in(42)
- 0.276 in(46)
- 0.281 in(42)
- 0.2881 in(42)
- 0.311 in(15)
- 0.312 in(42)
- 0.313 in(16)
- 0.315 in(73)
- 0.316 in(15)
- 0.317 in(22)
- 0.3199 in(22)
- 0.32 in(75)
- 0.375 in(25)
- 0.38 in(8)
- 0.394 in(28)
- 0.399 in(44)
a
Cutting Width
Cutting Width
- 1.4 mm(67)
- 1.49 mm(11)
- 1.5 mm(18)
- 1.55 mm(14)
- 1.6 mm(65)
- 1.99 mm(50)
- 2.0 mm(209)
- 2.12 mm(88)
- 2.125 mm(88)
- 2.13 mm(78)
- 2.2 mm(62)
- 2.38 mm(3)
- 2.387 mm(94)
- 2.388 mm(92)
- 2.49 mm(3)
- 2.5 mm(7)
- 2.51 mm(88)
- 2.511 mm(88)
- 2.62 mm(6)
- 3.0 mm(291)
- 3.05 mm(80)
- 3.1 mm(91)
- 3.11 mm(54)
- 3.12 mm(80)
- 3.125 mm(80)
- 3.13 mm(65)
- 3.175 mm(156)
- 3.177 mm(80)
- 3.18 mm(47)
- 3.3 mm(80)
- 3.301 mm(80)
- 3.302 mm(80)
- 4.0 mm(218)
- 4.05 mm(17)
- 4.094 mm(80)
- 4.1 mm(50)
- 4.11 mm(34)
- 4.12 mm(83)
- 4.125 mm(69)
- 4.75 mm(69)
- 4.76 mm(109)
- 4.762 mm(114)
- 4.763 mm(71)
- 4.873 mm(69)
- 4.877 mm(69)
- 4.878 mm(69)
- 5.0 mm(149)
- 5.1 mm(43)
- 5.12 mm(65)
- 5.125 mm(47)
- 5.13 mm(48)
- 6.0 mm(131)
- 6.12 mm(63)
- 6.125 mm(42)
- 6.13 mm(69)
- 6.346 mm(42)
- 6.35 mm(103)
- 6.473 mm(42)
- 6.477 mm(42)
- 6.478 mm(42)
- 7.0 mm(46)
- 7.125 mm(42)
- 7.317 mm(42)
- 7.92 mm(22)
- 7.925 mm(22)
- 7.937 mm(18)
- 7.938 mm(16)
- 7.94 mm(16)
- 8.0 mm(75)
- 8.051 mm(22)
- 8.052 mm(22)
- 8.12 mm(22)
- 8.125 mm(22)
- 8.13 mm(45)
- 9.525 mm(23)
- 9.53 mm(10)
- 9.651 mm(8)
- 10.0 mm(28)
- 10.125 mm(8)
- 10.13 mm(36)
a
Front End Type
Front End Type
- MCS - Modular Cartridge System (87)
- VKT - Square Shank (20)
Insert Shape
Insert Shape
- PRISMATIC (1865)
Cartridge Size
Cartridge Size
- 50 (43)
- 65 (23)
Front End Style
Front End Style
- MCS01 Modular Deep Grooving (87)
- VKT01 Std Design (20)
Insert Size
Insert Size
- 1 (5)
- 10 (12)
- 2 (86)
- 3 (80)
- 4 (77)
- 5 (62)
- 6 (61)
- 8 (29)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 in(29)
- 0.315 in(10)
- 0.39 in(6)
- 0.3937 in(9)
- 0.394 in(31)
- 0.4331 in(1)
- 0.472 in(6)
- 0.473 in(4)
- 0.512 in(8)
- 0.5315 in(9)
- 0.55 in(1)
- 0.551 in(7)
- 0.5512 in(38)
- 0.5709 in(4)
- 0.5906 in(3)
- 0.591 in(1)
- 0.6299 in(14)
- 0.63 in(155)
- 0.669 in(1)
- 0.6693 in(42)
- 0.689 in(6)
- 0.748 in(9)
- 0.787 in(5)
- 0.7874 in(23)
- 0.7875 in(1)
- 0.8268 in(9)
- 0.866 in(30)
- 0.8661 in(4)
- 0.9449 in(8)
- 0.9843 in(3)
- 1.02 in(5)
- 1.023 in(1)
- 1.0236 in(23)
- 1.024 in(80)
- 1.032 in(1)
- 1.1812 in(1)
- 1.26 in(38)
- 1.2992 in(12)
- 1.2994 in(2)
- 1.5 in(2)
- 1.5748 in(14)
- 1.575 in(16)
- 1.9685 in(5)
- 1.9686 in(3)
- 2.3622 in(8)
- 4.7244 in(2)
a
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 mm(29)
- 8.0 mm(9)
- 8.001 mm(1)
- 9.906 mm(6)
- 10.0 mm(40)
- 11.0 mm(1)
- 12.0 mm(10)
- 13.0 mm(8)
- 13.5 mm(9)
- 14.0 mm(46)
- 14.5 mm(4)
- 15.0 mm(4)
- 16.0 mm(165)
- 16.002 mm(4)
- 17.0 mm(43)
- 17.5 mm(6)
- 19.0 mm(9)
- 20.0 mm(29)
- 21.0 mm(9)
- 22.0 mm(34)
- 24.0 mm(8)
- 25.0 mm(3)
- 25.908 mm(5)
- 25.999 mm(6)
- 26.0 mm(99)
- 30.0 mm(1)
- 32.0 mm(38)
- 33.0 mm(14)
- 40.0 mm(32)
- 50.0 mm(8)
- 60.0 mm(8)
- 120.0 mm(2)
a
Gage Length
Gage Length
- 0.8500 in(1)
- 0.8660 in(11)
- 1.1020 in(2)
- 1.2990 in(2)
- 1.4960 in(2)
- 1.6930 in(2)
- 1.8500 in(6)
- 1.8900 in(6)
- 1.9290 in(4)
- 2.1060 in(4)
- 2.1850 in(2)
- 2.2440 in(8)
- 2.2830 in(8)
- 2.3030 in(6)
- 2.3031 in(1)
- 2.3820 in(2)
- 2.5000 in(14)
- 2.5790 in(2)
- 2.6180 in(4)
- 2.6970 in(4)
- 2.8940 in(4)
- 3.4250 in(2)
- 3.4840 in(2)
- 5.4390 in(3)
- 5.4630 in(4)
- 5.4820 in(4)
- 5.5080 in(12)
- 5.5280 in(10)
- 5.5330 in(4)
- 5.5335 in(3)
- 5.9060 in(4)
- 6.0000 in(8)
- 6.2260 in(2)
- 6.2500 in(4)
- 6.2700 in(4)
- 6.5330 in(2)
- 6.6930 in(3)
- 7.0000 in(4)
Gage Length
Gage Length
- 22.0000 mm(12)
- 28.0000 mm(2)
- 33.0000 mm(2)
- 38.0000 mm(2)
- 43.0000 mm(2)
- 47.0000 mm(6)
- 48.0000 mm(6)
- 49.0000 mm(4)
- 53.5000 mm(4)
- 55.5000 mm(2)
- 57.0000 mm(8)
- 58.0000 mm(8)
- 58.5000 mm(7)
- 60.5000 mm(2)
- 63.5000 mm(14)
- 65.5000 mm(2)
- 66.5000 mm(4)
- 68.5000 mm(4)
- 73.5000 mm(4)
- 87.0000 mm(2)
- 88.5000 mm(2)
- 138.1500 mm(3)
- 138.7500 mm(4)
- 139.2500 mm(4)
- 139.9000 mm(11)
- 139.9030 mm(1)
- 140.4000 mm(10)
- 140.5500 mm(7)
- 150.0000 mm(4)
- 152.4000 mm(8)
- 158.1500 mm(2)
- 158.7500 mm(4)
- 159.2500 mm(4)
- 165.9500 mm(2)
- 170.0000 mm(3)
- 177.8000 mm(4)
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 1.64 mm(2)
- 1.65 mm(6)
- 1.76 mm(6)
- 1.9 mm(13)
- 2.0 mm(40)
- 2.48 mm(7)
- 2.5 mm(3)
- 2.58 mm(8)
- 2.73 mm(6)
- 2.9 mm(18)
- 3.0 mm(20)
- 3.3 mm(12)
- 3.4 mm(56)
- 3.41 mm(12)
- 3.45 mm(8)
- 3.5 mm(40)
- 3.51 mm(5)
- 3.52 mm(6)
- 3.6 mm(6)
- 3.8 mm(7)
- 4.07 mm(7)
- 4.1 mm(14)
- 4.15 mm(8)
- 4.2 mm(55)
- 4.4 mm(11)
- 4.5 mm(18)
- 4.6 mm(1)
- 4.74 mm(10)
- 4.8 mm(7)
- 4.9 mm(54)
- 5.0 mm(1)
- 5.3 mm(6)
- 5.9 mm(12)
- 6.0 mm(22)
- 6.1 mm(6)
- 6.24 mm(4)
- 6.35 mm(2)
- 6.4 mm(27)
- 6.5 mm(8)
- 7.3 mm(2)
- 7.94 mm(5)
- 8.1 mm(13)
- 8.2 mm(5)
a
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.064 in(2)
- 0.065 in(6)
- 0.069 in(6)
- 0.075 in(13)
- 0.079 in(40)
- 0.097 in(1)
- 0.098 in(9)
- 0.101 in(8)
- 0.108 in(6)
- 0.115 in(18)
- 0.118 in(20)
- 0.13 in(12)
- 0.132 in(4)
- 0.133 in(1)
- 0.134 in(63)
- 0.136 in(8)
- 0.138 in(51)
- 0.143 in(6)
- 0.148 in(1)
- 0.149 in(6)
- 0.159 in(2)
- 0.16 in(7)
- 0.162 in(6)
- 0.163 in(14)
- 0.164 in(1)
- 0.165 in(54)
- 0.173 in(1)
- 0.175 in(10)
- 0.177 in(18)
- 0.182 in(1)
- 0.187 in(10)
- 0.188 in(1)
- 0.189 in(6)
- 0.192 in(11)
- 0.193 in(35)
- 0.194 in(8)
- 0.196 in(1)
- 0.208 in(6)
- 0.234 in(12)
- 0.235 in(4)
- 0.236 in(18)
- 0.238 in(3)
- 0.241 in(3)
- 0.246 in(4)
- 0.25 in(2)
- 0.251 in(6)
- 0.252 in(19)
- 0.254 in(2)
- 0.256 in(8)
- 0.289 in(2)
- 0.312 in(5)
- 0.319 in(13)
- 0.322 in(5)
a
insertGeometry
Shape
Shape
- PRISMATIC (1162)
Insert Seat Size
Insert Seat Size
- 1 (39)
- 10 (49)
- 1B (38)
- 2 (146)
- 2B (18)
- 2S (14)
- 3 (243)
- 3S (24)
- 4 (212)
- 4S (14)
- 5 (120)
- 5S (16)
- 6 (144)
- 8 (85)
Cutting Tool Material
Cutting Tool Material
- B H (147)
- B L (570)
- C N (168)
- D P (107)
- H T (236)
- H W (1764)
backEnd
Connection Type
Connection Type
- CUTOFF BLADE (85)
- Cutoff Blade (3)
- SQUARE SHANK (549)
System Size
System Size
- KM40TS (4)
- KM4X100 (4)
- KM4X63 (8)
- KM50TS (8)
- KM63TS (8)
- KM63XMZ (11)
- KM80ATC (8)
- KM80TS (8)
- PSC40 (4)
- PSC50 (8)
- PSC63 (8)
- PSC80 (8)
- VDI30 (10)
- VDI40 (10)
Back-End Diameter
Back-End Diameter
- 30.0 mm(10)
- 40.0 mm(18)
- 50.0 mm(16)
- 63.0 mm(35)
- 80.0 mm(24)
- 100.0 mm(4)
a
Back-End Diameter
Back-End Diameter
- 1.181 in(8)
- 1.2 in(2)
- 1.5748 in(4)
- 1.575 in(14)
- 1.9685 in(4)
- 1.969 in(8)
- 1.97 in(4)
- 2.48 in(28)
- 2.4803 in(7)
- 3.15 in(24)
- 3.937 in(4)
a
Shank Height
Shank Height
- 0.375 in(8)
- 0.394 in(7)
- 0.472 in(27)
- 0.4724 in(11)
- 0.5 in(34)
- 0.625 in(23)
- 0.628 in(1)
- 0.6299 in(11)
- 0.63 in(15)
- 0.747 in(5)
- 0.7471 in(1)
- 0.748 in(2)
- 0.75 in(74)
- 0.787 in(42)
- 0.7874 in(55)
- 0.984 in(40)
- 0.9843 in(43)
- 1.0 in(82)
- 1.02 in(4)
- 1.022 in(5)
- 1.0224 in(3)
- 1.0225 in(4)
- 1.023 in(4)
- 1.0236 in(19)
- 1.25 in(31)
- 1.2587 in(1)
- 1.2589 in(6)
- 1.259 in(2)
- 1.2598 in(45)
- 1.26 in(16)
- 1.5 in(7)
- 1.5748 in(6)
- 2.0659 in(1)
- 2.07 in(2)
a
Shank Height
Shank Height
- 9.525 mm(2)
- 9.53 mm(6)
- 10.0 mm(7)
- 12.0 mm(38)
- 12.7 mm(10)
- 12.71 mm(24)
- 15.875 mm(9)
- 15.88 mm(14)
- 16.0 mm(27)
- 19.0 mm(8)
- 19.05 mm(74)
- 20.0 mm(97)
- 25.0 mm(83)
- 25.4 mm(82)
- 26.0 mm(39)
- 31.75 mm(31)
- 32.0 mm(70)
- 38.1 mm(7)
- 40.0 mm(6)
- 52.475 mm(1)
- 52.5 mm(2)
a
Shank Width
Shank Width
- 0.065 in(6)
- 0.07 in(1)
- 0.0701 in(1)
- 0.0709 in(6)
- 0.071 in(5)
- 0.078 in(1)
- 0.094 in(5)
- 0.0945 in(10)
- 0.1339 in(3)
- 0.134 in(4)
- 0.173 in(2)
- 0.1732 in(3)
- 0.2126 in(3)
- 0.213 in(3)
- 0.2756 in(1)
- 0.276 in(2)
- 0.313 in(32)
- 0.375 in(8)
- 0.394 in(7)
- 0.472 in(25)
- 0.4724 in(13)
- 0.5 in(34)
- 0.624 in(1)
- 0.625 in(23)
- 0.628 in(1)
- 0.6299 in(12)
- 0.63 in(14)
- 0.743 in(1)
- 0.75 in(73)
- 0.787 in(42)
- 0.7874 in(54)
- 0.984 in(40)
- 0.9843 in(53)
- 1.0 in(82)
- 1.25 in(31)
- 1.2598 in(18)
- 1.26 in(4)
- 1.5 in(7)
- 1.5748 in(6)
a
Shank Width
Shank Width
- 1.65 mm(6)
- 1.78 mm(3)
- 1.8 mm(11)
- 2.4 mm(15)
- 3.4 mm(7)
- 4.4 mm(5)
- 5.4 mm(6)
- 7.0 mm(3)
- 7.95 mm(32)
- 9.525 mm(5)
- 9.53 mm(3)
- 10.0 mm(7)
- 12.0 mm(38)
- 12.7 mm(10)
- 12.71 mm(24)
- 15.875 mm(12)
- 15.88 mm(11)
- 16.0 mm(28)
- 18.86 mm(1)
- 19.05 mm(73)
- 20.0 mm(96)
- 25.0 mm(93)
- 25.4 mm(82)
- 31.75 mm(31)
- 32.0 mm(22)
- 38.1 mm(7)
- 40.0 mm(6)
a
No filters matching ""
