successfully added to cart
View Cart

Usinagem interna • Barras de mandrilar e adaptadores

Select Filters
Filters
Filters
View filters in
Metric
Mais contatos
keyFilters
Workpiece Material
  • P Steel (1705)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1704)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1704)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1704)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1704)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1704)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1705)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1705)
  • M Stainless Steel (1705)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1705)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1705)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1705)
  • K Cast Iron (1688)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1688)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1686)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1686)
  • N Non-Ferrous Materials (1608)
    • N1
      Wrought Aluminum
      (1575)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1581)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1210)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1607)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1581)
    • N6
      Carbon, Graphite Composites, CFRP
      (1437)
    • N7
      MMC's
      (1574)
  • S High-Temp Alloys (1717)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1715)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1715)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1715)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1704)
  • H Hardened Materials (1407)
    • H1
      Hardened Materials 44-48 HRC
      (1407)
    • H2
      Hardened Materials 48-55 HRC
      (1400)
    • H3
      Hardened Materials 56-60 HRC
      (1398)
    • H4
      Hardened Materials >60 HRC
      (1210)
Select First Choice
  • CN (73)
  • DE (70)
  • GB (13)
  • IN (1)
  • US (71)
Applications
  • Back Boring Back Boring (1142)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (166)
  • Blind Hole Finishing Blind Hole Finishing (166)
  • CRT Boring CRT Boring (164)
  • CRT Profiling CRT Profiling (164)
  • Chamfer Milling Chamfer Milling (164)
  • Chamfer Turning Chamfer Turning (17)
  • Cut-Off Cut-Off (173)
  • Deep Grooving Deep Grooving (173)
  • Drilling Drilling (164)
  • Face Grooving Face Grooving (9)
  • Face Milling Face Milling (164)
  • Facing Facing (204)
  • Grooving Grooving (171)
  • ID Facing ID Facing (171)
  • ID Grooving ID Grooving (184)
  • ID Thread Turning ID Thread Turning (20)
  • Multiple Direction Cutting Multiple Direction Cutting (1506)
  • OD Thread Turning OD Thread Turning (9)
  • Plunge Turning Plunge Turning (17)
  • Profiling Profiling (1158)
  • Shoulder Milling Shoulder Milling (164)
  • TRN Boring TRN Boring (1169)
  • Threading Threading (173)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (166)
  • Through Hole Finishing Through Hole Finishing (166)
  • Turning Turning (204)
Type of Thread
  • 55 (6)
  • 60 (18)
  • ACME (17)
  • API (13)
  • API RD (13)
  • BSPT (4)
  • BSW (14)
  • BUTTRESS (10)
  • M (14)
  • NPT (12)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (14)
  • TR DIN 103 (6)
  • UN (14)
  • UNJ (12)
Cutting Condition
  • Heavily Interrupted Cut (1504)
  • Interrupted (685)
  • Lightly Interrupted Cut (1651)
  • Smooth Cut (1696)
  • Varying Depth of Cut (1616)
Tool Cutting Edge Angle
  • 45.0 (58)
  • 60.0 (22)
  • 62.5 (20)
  • 75.0 (111)
  • 85.0 (12)
  • 89.0 (2)
  • 90.0 (414)
  • 91.0 (2)
  • 93.0 (370)
  • 95.0 (827)
  • 97.0 (10)
  • 107.5 (50)
  • 140.0 (4)
to
Cutting Edges Per Insert
  • 1.0 (1093)
  • 2.0 (983)
  • 3.0 (387)
  • 4.0 (718)
  • 6.0 (139)
  • 8.0 (296)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.026 (3)
  • 0.03 (53)
  • 0.038 (185)
  • 0.05 (120)
  • 0.051 (100)
  • 0.057 (5)
  • 0.066 (8)
  • 0.07 (4)
  • 0.076 (14)
  • 0.08 (8)
  • 0.081 (4)
  • 0.089 (3)
  • 0.09 (3)
  • 0.094 (8)
  • 0.097 (9)
  • 0.1 (1032)
  • 0.102 (422)
  • 0.116 (3)
  • 0.117 (5)
  • 0.127 (8)
  • 0.131 (8)
  • 0.132 (8)
  • 0.133 (8)
  • 0.15 (8)
  • 0.152 (4)
  • 0.157 (8)
  • 0.16 (2)
  • 0.165 (10)
  • 0.173 (8)
  • 0.177 (27)
  • 0.178 (101)
  • 0.18 (120)
  • 0.19 (10)
  • 0.191 (10)
  • 0.198 (8)
  • 0.2 (1205)
  • 0.202 (8)
  • 0.203 (759)
  • 0.21 (4)
  • 0.224 (8)
  • 0.235 (8)
  • 0.244 (3)
  • 0.25 (8)
  • 0.251 (8)
  • 0.254 (10)
  • 0.255 (3)
  • 0.269 (8)
  • 0.282 (8)
  • 0.284 (8)
  • 0.3 (8)
  • 0.305 (2)
  • 0.315 (9)
  • 0.318 (10)
  • 0.33 (8)
  • 0.34 (48)
  • 0.343 (5)
  • 0.356 (8)
  • 0.38 (120)
  • 0.381 (93)
  • 0.394 (14)
  • 0.396 (59)
  • 0.397 (1233)
  • 0.4 (1489)
  • 0.404 (8)
  • 0.406 (207)
  • 0.41 (48)
  • 0.43 (8)
  • 0.432 (2)
  • 0.445 (10)
  • 0.472 (3)
  • 0.49 (8)
  • 0.508 (8)
  • 0.52 (1)
  • 0.565 (1)
  • 0.57 (5)
  • 0.572 (10)
  • 0.575 (5)
  • 0.6 (60)
  • 0.65 (1)
  • 0.7 (4)
  • 0.787 (35)
  • 0.79 (58)
  • 0.791 (29)
  • 0.792 (250)
  • 0.794 (1055)
  • 0.795 (15)
  • 0.8 (1517)
  • 0.81 (48)
  • 0.826 (1)
  • 0.902 (10)
  • 0.93 (2)
  • 0.99 (1)
  • 1.0 (8)
  • 1.188 (65)
  • 1.19 (249)
  • 1.191 (804)
  • 1.194 (8)
  • 1.195 (5)
  • 1.2 (1121)
  • 1.25 (8)
  • 1.5 (8)
  • 1.585 (8)
  • 1.587 (210)
  • 1.588 (546)
  • 1.59 (1)
  • 1.6 (776)
  • 1.75 (8)
  • 1.98 (5)
  • 1.981 (8)
  • 2.0 (10)
  • 2.25 (10)
  • 2.38 (47)
  • 2.381 (101)
  • 2.388 (10)
  • 2.39 (1)
  • 2.4 (253)
  • 2.5 (2)
  • 3.0 (2)
  • 3.175 (2)
  • 3.18 (26)
  • 3.2 (97)
  • 4.0 (10)
  • 5.0 (2)
  • 6.35 (3)
to
Corner Radius
  • 0.001 (35)
  • 0.0011 (18)
  • 0.0015 (185)
  • 0.002 (127)
  • 0.0023 (5)
  • 0.0026 (8)
  • 0.0028 (4)
  • 0.003 (14)
  • 0.0031 (8)
  • 0.0032 (4)
  • 0.0035 (3)
  • 0.0037 (8)
  • 0.0038 (9)
  • 0.004 (1076)
  • 0.0046 (8)
  • 0.005 (8)
  • 0.0052 (8)
  • 0.0053 (8)
  • 0.0059 (8)
  • 0.006 (4)
  • 0.0062 (8)
  • 0.0065 (10)
  • 0.0068 (8)
  • 0.007 (128)
  • 0.0075 (10)
  • 0.0078 (10)
  • 0.0079 (2)
  • 0.008 (1215)
  • 0.0083 (214)
  • 0.0088 (8)
  • 0.0093 (8)
  • 0.0096 (3)
  • 0.0099 (8)
  • 0.01 (10)
  • 0.0106 (8)
  • 0.0111 (8)
  • 0.0112 (8)
  • 0.0118 (8)
  • 0.012 (2)
  • 0.0124 (8)
  • 0.0125 (10)
  • 0.013 (48)
  • 0.0135 (10)
  • 0.014 (8)
  • 0.015 (120)
  • 0.0155 (14)
  • 0.0156 (1490)
  • 0.0158 (4)
  • 0.0159 (8)
  • 0.016 (643)
  • 0.017 (10)
  • 0.0175 (10)
  • 0.0186 (3)
  • 0.0193 (8)
  • 0.02 (9)
  • 0.0225 (10)
  • 0.026 (1)
  • 0.0276 (4)
  • 0.031 (697)
  • 0.0311 (29)
  • 0.0312 (998)
  • 0.0313 (1517)
  • 0.0315 (121)
  • 0.032 (48)
  • 0.0325 (1)
  • 0.0355 (10)
  • 0.0368 (2)
  • 0.039 (1)
  • 0.0394 (8)
  • 0.0468 (65)
  • 0.0469 (1120)
  • 0.047 (744)
  • 0.0472 (69)
  • 0.0487 (17)
  • 0.0492 (8)
  • 0.0591 (8)
  • 0.0625 (786)
  • 0.063 (548)
  • 0.0689 (8)
  • 0.078 (8)
  • 0.0787 (10)
  • 0.0886 (10)
  • 0.0938 (336)
  • 0.094 (84)
  • 0.0984 (2)
  • 0.106 (5)
  • 0.1181 (2)
  • 0.125 (43)
  • 0.126 (56)
  • 0.1563 (210)
  • 0.1575 (10)
  • 0.1969 (2)
  • 0.197 (2)
  • 0.25 (3)
  • 0.312 (99)
  • 0.4688 (1)
to
application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (654)
  • 241 (210)
  • AC5 (64)
  • CG4 (55)
  • CG5 (24)
  • CG6 (3)
  • CL4 (397)
  • CM1 (24)
  • CM2 (637)
  • CM3 (527)
  • CM4 (410)
  • CM5 (77)
  • CPX (573)
  • CW2 (307)
  • CW2015 (117)
  • CW5025 (142)
  • GH1 (35)
  • GH2 (1)
  • GX (417)
  • HCK10 (5)
  • HK1500 (104)
  • HK35 (5)
  • HT2 (482)
  • HTX (476)
  • HWK15 (5)
  • K00379 (93)
  • K060 (468)
  • K090 (758)
  • K1 (339)
  • K1010P (35)
  • K10M (860)
  • K10P (775)
  • K10U (751)
  • K11 (40)
  • K15U (772)
  • K20K (844)
  • K21 (477)
  • K25M (707)
  • K25P (689)
  • K2884 (17)
  • K2885 (78)
  • K313 (1568)
  • K35P (334)
  • K420 (755)
  • K45 (582)
  • K4H (8)
  • K6 (93)
  • K68 (1390)
  • K8735 (15)
  • KB1340 (285)
  • KB1345 (563)
  • KB1610 (942)
  • KB1625 (590)
  • KB1630 (708)
  • KB5610 (802)
  • KB5625 (839)
  • KB5630 (609)
  • KB9610 (1019)
  • KB9640 (363)
  • KBH10 (723)
  • KBH10B (438)
  • KBH20 (829)
  • KBH20B (438)
  • KBK35 (214)
  • KBK45 (2)
  • KC210 (567)
  • KC250 (720)
  • KC5010 (1693)
  • KC5020P (95)
  • KC5025 (1546)
  • KC5410 (1268)
  • KC5510 (734)
  • KC5525 (492)
  • KC710 (549)
  • KC720 (1298)
  • KC722 (224)
  • KC730 (1626)
  • KC7310 (940)
  • KC732 (1287)
  • KC735M (15)
  • KC740 (38)
  • KC8050 (1484)
  • KC810 (1469)
  • KC850 (1539)
  • KC9010 (1250)
  • KC9025 (1527)
  • KC910 (1448)
  • KC9105 (1267)
  • KC9110 (1521)
  • KC9120 (1287)
  • KC9125 (1410)
  • KC9125RR (58)
  • KC9140 (775)
  • KC9145 (602)
  • KC9210 (40)
  • KC9215 (765)
  • KC9225 (1395)
  • KC9240 (1366)
  • KC9240NEW (1352)
  • KC9245 (747)
  • KC9315 (1501)
  • KC9320 (1303)
  • KC9325 (1195)
  • KC935 (1642)
  • KC950 (1326)
  • KC990 (1403)
  • KCD25 (721)
  • KCK05 (1387)
  • KCK05B (897)
  • KCK15 (1227)
  • KCK15B (1349)
  • KCK20 (1369)
  • KCK20B (1319)
  • KCM15 (1352)
  • KCM15B (1118)
  • KCM25 (1393)
  • KCM25B (1262)
  • KCM35 (1038)
  • KCM35B (646)
  • KCP05 (1295)
  • KCP05B (662)
  • KCP10 (1409)
  • KCP10B (1425)
  • KCP15 (18)
  • KCP25 (1429)
  • KCP25B (1486)
  • KCP30 (1294)
  • KCP30B (727)
  • KCP40 (659)
  • KCP40B (704)
  • KCPK05 (754)
  • KCS10 (868)
  • KCS10B (1207)
  • KCU10 (1632)
  • KCU25 (1495)
  • KD050 (876)
  • KD081 (761)
  • KD100 (876)
  • KD105 (179)
  • KD120 (811)
  • KD1400 (1096)
  • KD1405 (705)
  • KD1425 (1176)
  • KD200 (2)
  • KD230 (5)
  • KD240 (2)
  • KM1 (460)
  • KMF (248)
  • KT1120 (197)
  • KT125 (825)
  • KT150 (739)
  • KT175 (1109)
  • KT315 (1448)
  • KT325 (547)
  • KT5020 (57)
  • KTP10 (668)
  • KU10 (435)
  • KU10T (1228)
  • KU25T (14)
  • KU30T (1279)
  • KY1310 (634)
  • KY1320 (682)
  • KY1525 (5)
  • KY1540 (468)
  • KY1615 (739)
  • KY2000 (567)
  • KY2100 (372)
  • KY3000 (689)
  • KY3400 (631)
  • KY3500 (729)
  • KY4000 (385)
  • KY4300 (463)
  • KY4400 (747)
  • KYHK15B (8)
  • KYK10 (552)
  • KYK25 (622)
  • KYK35 (729)
  • KYS25 (405)
  • KYS30 (465)
  • MC2 (78)
  • MC3 (1)
  • NL200 (250)
  • NL250 (710)
  • NL300 (508)
  • NL400 (342)
  • NL920 (568)
  • P10 (60)
  • P20 (38)
  • P25 (370)
  • P2F (73)
  • PB100 (70)
  • PB170 (71)
  • PB250 (73)
  • PB300 (67)
  • PD100 (5)
  • PD50 (5)
  • PS5 (281)
  • SF30 (15)
  • SP0819 (489)
  • SP0A00 (38)
  • SP0PW3 (3)
  • SP3019 (489)
  • SP4019 (408)
  • SP4036 (30)
  • SP4093 (30)
  • SP4200 (38)
  • SP61EJ (58)
  • SP7779 (1)
  • SPADAP (32)
  • SPB400 (8)
  • SPM5F2 (120)
  • SPMQMA (59)
  • SPSREJ (18)
  • THM (79)
  • THM-X (72)
  • THMF-X (67)
  • TN10P (158)
  • TN10U (146)
  • TN15M (154)
  • TN15U (143)
  • TN2000 (107)
  • TN20K (152)
  • TN20P (158)
  • TN30M (158)
  • TN30P (142)
  • TN4000 (102)
  • TN5015 (110)
  • TN5020 (110)
  • TN5105 (150)
  • TN5120 (152)
  • TN6010 (121)
  • TN6025 (101)
  • TN7005 (149)
  • TN7010 (154)
  • TN7015 (154)
  • TN7025 (154)
  • TN7035 (163)
  • TN7105 (112)
  • TN7110 (110)
  • TN7115 (152)
  • TN7125 (110)
  • TN7135 (106)
  • TN8025 (156)
  • TTI15 (79)
  • TTM09 (1)
  • TTR (73)
  • TTS (73)
  • TTX (130)
  • W00160 (1)
  • W00162 (15)
  • W00342 (5)
  • WBH10C (137)
  • WBH10P (149)
  • WBH10U (149)
  • WBH25P (165)
  • WBH25U (118)
  • WBH30P (149)
  • WBK40U (71)
  • WBK45U (121)
  • WDN00U (170)
  • WDN25U (202)
  • WK05CT (156)
  • WK15CT (108)
  • WK20CT (205)
  • WM15CT (210)
  • WM25CT (195)
  • WM35CT (150)
  • WP05CT (92)
  • WP15CT (195)
  • WP20TT (6)
  • WP25CT (221)
  • WP35CT (155)
  • WS10PT (156)
  • WS25PT (153)
  • WU10HT (150)
  • X00511 (210)
  • YY3A00 (17)
  • YY87EL (38)
  • YYMITA (9)
Wiper Insert
  • N (1446)
  • Y (685)
Minimum Axial Groove Diameter
  • 0.18 (10)
  • 0.2039 (1)
  • 0.204 (13)
  • 0.2079 (1)
  • 0.208 (10)
  • 0.218 (4)
  • 0.224 (7)
  • 0.2276 (2)
  • 0.228 (10)
  • 0.23 (1)
  • 0.2339 (5)
  • 0.234 (15)
  • 0.2362 (3)
  • 0.243 (2)
  • 0.244 (1)
  • 0.2598 (2)
  • 0.26 (7)
  • 0.267 (4)
  • 0.272 (1)
  • 0.275 (11)
  • 0.278 (1)
  • 0.279 (5)
  • 0.2791 (1)
  • 0.28 (3)
  • 0.285 (31)
  • 0.292 (6)
  • 0.2921 (1)
  • 0.2957 (1)
  • 0.296 (10)
  • 0.2992 (3)
  • 0.3 (5)
  • 0.321 (4)
  • 0.346 (1)
  • 0.347 (4)
  • 0.356 (6)
  • 0.3575 (2)
  • 0.358 (7)
  • 0.36 (5)
  • 0.3602 (1)
  • 0.362 (1)
  • 0.413 (1)
  • 0.415 (16)
  • 0.431 (1)
  • 0.433 (8)
  • 0.4331 (10)
  • 0.4378 (1)
  • 0.438 (5)
  • 0.439 (3)
  • 0.4799 (5)
  • 0.48 (33)
  • 0.49 (2)
  • 0.508 (2)
  • 0.5118 (26)
  • 0.512 (11)
  • 0.5181 (1)
  • 0.538 (1)
  • 0.54 (2)
  • 0.563 (6)
  • 0.6 (53)
  • 0.6299 (44)
  • 0.63 (12)
  • 0.65 (1)
  • 0.7299 (2)
  • 0.73 (10)
  • 0.731 (4)
  • 0.77 (48)
  • 0.7701 (7)
  • 0.787 (12)
  • 0.7874 (65)
  • 0.836 (1)
  • 0.842 (1)
  • 0.85 (13)
  • 0.855 (1)
  • 0.9299 (6)
  • 0.93 (44)
  • 0.9799 (1)
  • 0.98 (19)
  • 0.984 (18)
  • 0.9843 (67)
  • 1.0 (2)
  • 1.03 (1)
  • 1.06 (1)
  • 1.063 (2)
  • 1.1811 (2)
  • 1.19 (5)
  • 1.2 (61)
  • 1.22 (11)
  • 1.2598 (119)
  • 1.26 (38)
  • 1.268 (1)
  • 1.286 (2)
  • 1.2993 (2)
  • 1.3 (20)
  • 1.31 (1)
  • 1.312 (1)
  • 1.42 (1)
  • 1.4567 (1)
  • 1.457 (3)
  • 1.47 (26)
  • 1.55 (2)
  • 1.56 (1)
  • 1.5748 (138)
  • 1.575 (39)
  • 1.625 (1)
  • 1.6929 (2)
  • 1.693 (1)
  • 1.705 (25)
  • 1.76 (42)
  • 1.77 (1)
  • 1.772 (2)
  • 1.81 (2)
  • 1.875 (1)
  • 1.8898 (5)
  • 1.89 (1)
  • 1.9685 (163)
  • 1.969 (33)
  • 2.0 (26)
  • 2.01 (19)
  • 2.047 (2)
  • 2.125 (1)
  • 2.165 (2)
  • 2.1654 (6)
  • 2.25 (6)
  • 2.323 (2)
  • 2.3622 (60)
  • 2.4 (45)
  • 2.48 (9)
  • 2.4803 (72)
  • 2.5 (12)
  • 2.559 (1)
  • 2.582 (1)
  • 2.592 (3)
  • 2.65 (3)
  • 2.7559 (43)
  • 2.756 (1)
  • 2.87 (1)
  • 3.03 (34)
  • 3.25 (11)
  • 3.937 (12)
to