Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

Kennametal ao seu serviço

Tem uma pergunta específica sobre o produto?

Veja uma lista completa de profissionais de serviços globais por área de especialização

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho
Voltar à solução

Editando solução

Adicionando solução

Nome da solução: {{SolutionName}}

Barras de mandrilar modular com interface serrilhada

Essas barras de mandrilar usam um novo portfólio de cabeças parafusadas que se conecta à barra por um design ranhurado.

  • As cabeças parafusadas com design curto resultam em peso baixo, fornecendo alta estabilidade e repetibilidade consistente.
  • A interface de projeto serrilhada oferece maiores resistências de conexão, permitindo maior precisão no posicionamento do inserto.
  • As barras de mandrilar sem vibração fornecem estabilidade e rigidez ao tornear em uma projeção estendida de até 10xD.
  • As barras de torneamento interno sem vibração são uma solução “monte e use” projetadas para serem operadas de modo surpreendente, sem a possibilidade ou necessidade de ajuste manual. O pacote de amortecimento interno foi desenhado para fornecer estabilidade ao processo ao aumentar a rigidez da barra e o amortecimento da ressonância.

Barra de mandrilar modular de aço

  • Barra de mandrilar modular em aço com capacidade de refrigerante interno.
  • Mandrilar com projeções de até 4xD.

Barra de mandrilar sem vibração

  • Barras de mandrilar sem vibração com pacote de amortecimento interno.
  • Assegura usinagem sem vibração e trepidação, permitindo taxas de remoção de material altas e cortes em profundidade grandes, resultando em qualidade superficial alta e maior produtividade.
  • Mandrilar com projeções de até 10xD.

Top Notch™  e Rosqueamento LT 

 

  • Cabeças para Top Notch e insertos de rosqueamento LT

Fixação por parafuso

 

  • Cabeças para insertos estilo DC/TC/VB/WP

Fixação de estilo D

 

  • Cabeças para insertos estilo CN/DN/TN/VN

Fixação de estilo P

 

  • Cabeças para insertos estilo CN/DN/TN/WN
Selecionar filtros
Filters
Filtros
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (104)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (104)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (104)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (104)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (104)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (104)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (104)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (104)
  • M Stainless Steel (104)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (104)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (104)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (104)
  • K Cast Iron (104)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (104)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (104)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (104)
  • N Non-Ferrous Materials (99)
    • N1
      Wrought Aluminum
      (99)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (99)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (73)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (99)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (99)
    • N6
      Carbon, Graphite Composites, CFRP
      (93)
    • N7
      MMC's
      (99)
  • S High-Temp Alloys (104)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (104)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (104)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (104)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (104)
  • H Hardened Materials (93)
    • H1
      Hardened Materials 44-48 HRC
      (93)
    • H2
      Hardened Materials 48-55 HRC
      (86)
    • H3
      Hardened Materials 56-60 HRC
      (86)
    • H4
      Hardened Materials >60 HRC
      (76)
Applications
Applications
  • ID Grooving ID Grooving (11)
  • ID Thread Turning ID Thread Turning (11)
  • TRN Boring TRN Boring (11)
Type of Thread
Type of Thread
  • 55 (6)
  • 60 (16)
  • ACME (17)
  • API (13)
  • API BUTTRESS (2)
  • API RD (13)
  • BSPT (4)
  • BSW (14)
  • BUTTRESS (10)
  • M (14)
  • NPT (12)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (14)
  • TR DIN 103 (6)
  • UN (14)
  • UNJ (12)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (97)
  • Interrupted (46)
  • Lightly Interrupted Cut (97)
  • Smooth Cut (97)
  • Varying Depth of Cut (97)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 62.5 (2)
  • 90.0 (34)
  • 93.0 (34)
  • 95.0 (32)
Tool Cutting Edge Angle Min a Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (104)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (68)
  • 2.0 (73)
  • 3.0 (27)
  • 4.0 (46)
  • 6.0 (14)
  • 8.0 (24)
Cutting Edges Per Insert Min a Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (14)
  • 0.002 in (40)
  • 0.003 in (14)
  • 0.004 in (74)
  • 0.005 in (8)
  • 0.006 in (14)
  • 0.007 in (10)
  • 0.008 in (80)
  • 0.01 in (10)
  • 0.011 in (8)
  • 0.012 in (10)
  • 0.014 in (18)
  • 0.016 in (93)
  • 0.017 in (10)
  • 0.019 in (10)
  • 0.02 in (8)
  • 0.021 in (1)
  • 0.023 in (10)
  • 0.027 in (1)
  • 0.028 in (4)
  • 0.031 in (92)
  • 0.033 in (1)
  • 0.035 in (10)
  • 0.037 in (2)
  • 0.039 in (9)
  • 0.047 in (84)
  • 0.049 in (8)
  • 0.06 in (8)
  • 0.062 in (20)
  • 0.063 in (56)
  • 0.069 in (8)
  • 0.078 in (8)
  • 0.079 in (10)
  • 0.089 in (10)
  • 0.094 in (8)
  • 0.095 in (30)
  • 0.098 in (2)
  • 0.125 in (4)
  • 0.126 in (8)
Corner Radius Min a Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (14)
  • 0.05 mm (40)
  • 0.076 mm (14)
  • 0.1 mm (74)
  • 0.125 mm (8)
  • 0.151 mm (14)
  • 0.176 mm (10)
  • 0.2 mm (80)
  • 0.225 mm (8)
  • 0.25 mm (10)
  • 0.275 mm (8)
  • 0.301 mm (10)
  • 0.325 mm (10)
  • 0.351 mm (18)
  • 0.4 mm (93)
  • 0.426 mm (10)
  • 0.45 mm (10)
  • 0.476 mm (3)
  • 0.5 mm (8)
  • 0.525 mm (1)
  • 0.576 mm (10)
  • 0.65 mm (1)
  • 0.701 mm (4)
  • 0.775 mm (8)
  • 0.8 mm (84)
  • 0.826 mm (1)
  • 0.9 mm (10)
  • 0.925 mm (2)
  • 1.0 mm (9)
  • 1.201 mm (84)
  • 1.25 mm (8)
  • 1.5 mm (8)
  • 1.576 mm (20)
  • 1.6 mm (56)
  • 1.75 mm (8)
  • 1.975 mm (8)
  • 2.0 mm (10)
  • 2.25 mm (10)
  • 2.375 mm (8)
  • 2.401 mm (30)
  • 2.5 mm (2)
  • 3.176 mm (4)
  • 3.2 mm (8)
Corner Radius Min a Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (46)
  • 241 (12)
  • CL4 (32)
  • CM2 (44)
  • CM3 (34)
  • CM4 (28)
  • CPX (42)
  • CW2 (30)
  • GH1 (8)
  • GX (16)
  • HT2 (54)
  • HTX (50)
  • K00331 (4)
  • K060 (24)
  • K090 (46)
  • K1 (16)
  • K1010P (8)
  • K10M (74)
  • K10P (60)
  • K10U (66)
  • K15U (66)
  • K20K (66)
  • K21 (26)
  • K25M (60)
  • K25P (52)
  • K2885 (8)
  • K313 (92)
  • K35P (28)
  • K420 (49)
  • K45 (30)
  • K4H (8)
  • K68 (91)
  • KB1340 (16)
  • KB1345 (48)
  • KB1610 (50)
  • KB1625 (44)
  • KB1630 (44)
  • KB5610 (44)
  • KB5625 (62)
  • KB5630 (38)
  • KB9610 (62)
  • KB9640 (16)
  • KBH10 (60)
  • KBH10B (36)
  • KBH20 (65)
  • KBH20B (36)
  • KBK35 (12)
  • KC210 (26)
  • KC250 (32)
  • KC5010 (101)
  • KC5020P (18)
  • KC5025 (102)
  • KC5410 (86)
  • KC5510 (52)
  • KC5525 (30)
  • KC710 (28)
  • KC720 (82)
  • KC722 (26)
  • KC730 (95)
  • KC7310 (54)
  • KC732 (74)
  • KC8050 (84)
  • KC810 (91)
  • KC850 (95)
  • KC9010 (72)
  • KC9025 (86)
  • KC910 (84)
  • KC9105 (83)
  • KC9110 (96)
  • KC9120 (78)
  • KC9125 (86)
  • KC9140 (54)
  • KC9145 (36)
  • KC9210 (8)
  • KC9215 (54)
  • KC9225 (86)
  • KC9240 (84)
  • KC9240NEW (84)
  • KC9245 (54)
  • KC9315 (86)
  • KC9320 (92)
  • KC9325 (72)
  • KC935 (96)
  • KC950 (82)
  • KC990 (76)
  • KCD25 (28)
  • KCK05 (86)
  • KCK05B (74)
  • KCK15 (76)
  • KCK15B (82)
  • KCK20 (94)
  • KCK20B (92)
  • KCM15 (84)
  • KCM15B (78)
  • KCM25 (86)
  • KCM25B (82)
  • KCM35 (76)
  • KCM35B (58)
  • KCP05 (80)
  • KCP05B (50)
  • KCP10 (86)
  • KCP10B (94)
  • KCP15 (4)
  • KCP25 (86)
  • KCP25B (94)
  • KCP25C (84)
  • KCP30 (84)
  • KCP30B (50)
  • KCP40 (42)
  • KCP40B (54)
  • KCPK05 (50)
  • KCS10 (44)
  • KCS10B (68)
  • KCU10 (97)
  • KCU10B (84)
  • KCU25 (93)
  • KD050 (47)
  • KD081 (52)
  • KD100 (31)
  • KD120 (40)
  • KD1400 (56)
  • KD1405 (22)
  • KD1425 (64)
  • KM1 (24)
  • KMF (12)
  • KS15 (12)
  • KT1120 (16)
  • KT125 (46)
  • KT150 (28)
  • KT175 (68)
  • KT315 (88)
  • KT325 (64)
  • KT5020 (14)
  • KTP10 (30)
  • KU10 (24)
  • KU10T (84)
  • KU25T (14)
  • KU30T (92)
  • KY1310 (30)
  • KY1320 (46)
  • KY1540 (18)
  • KY1615 (46)
  • KY2000 (32)
  • KY2100 (14)
  • KY3000 (56)
  • KY3400 (34)
  • KY3500 (46)
  • KY4000 (22)
  • KY4300 (22)
  • KY4400 (46)
  • KYHK15B (46)
  • KYK10 (24)
  • KYK25 (34)
  • KYK35 (46)
  • KYS25 (16)
  • KYS30 (16)
  • NL200 (20)
  • NL250 (50)
  • NL300 (42)
  • NL400 (20)
  • NL920 (38)
  • P25 (14)
  • PS5 (24)
  • SP0819 (40)
  • SP3019 (32)
  • SP4019 (28)
  • SP4036 (4)
  • SP4093 (4)
  • SPADAP (2)
  • TN7035 (10)
  • X00511 (12)
  • X00580 (12)
  • X00581 (12)
  • X00582 (12)
  • X00583 (12)
  • X00584 (12)
  • X00585 (12)
  • X00586 (12)
  • X00591 (12)
  • X00592 (12)
  • X00593 (12)
  • X00594 (12)
  • X00596 (12)
  • X00597 (12)
  • X00599 (12)
  • YY3A00 (2)
Hand Of Tool
Hand Of Tool
  • L (47)
  • R (57)
Wiper Insert
Wiper Insert
  • N (104)
  • Y (44)
F Dimension
F Dimension
  • 17.0 mm (20)
  • 18.276 mm (1)
  • 22.0 mm (21)
  • 23.0 mm (2)
  • 23.276 mm (1)
  • 27.0 mm (27)
  • 28.276 mm (1)
  • 28.675 mm (1)
  • 35.0 mm (27)
  • 36.275 mm (1)
  • 36.676 mm (1)
  • 36.975 mm (1)
F Dimension Min a F Dimension Max
F Dimension
F Dimension
  • 0.669 in (20)
  • 0.72 in (1)
  • 0.866 in (21)
  • 0.906 in (2)
  • 0.916 in (1)
  • 1.063 in (27)
  • 1.113 in (1)
  • 1.129 in (1)
  • 1.379 in (27)
  • 1.428 in (1)
  • 1.444 in (1)
  • 1.456 in (1)
F Dimension Min a F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 32.0 mm (19)
  • 33.0 mm (2)
  • 40.0 mm (24)
  • 50.0 mm (29)
  • 63.0 mm (30)
Minimum Axial Groove Diameter Min a Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.26 in (19)
  • 1.299 in (2)
  • 1.575 in (24)
  • 1.969 in (29)
  • 2.48 in (30)
Minimum Axial Groove Diameter Min a Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (10)
Maximum Axial Groove Diameter Min a Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (10)
Maximum Axial Groove Diameter Min a Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (32)
  • E (52)
  • P (2)
  • S (18)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (61)
  • NEGATIVE-ZERO (30)
  • NEUTRAL (ZERO) (13)
Maximum Bore Depth
Maximum Bore Depth
  • 3.938 in (21)
  • 5.039 in (24)
  • 6.299 in (29)
  • 7.875 in (30)
Maximum Bore Depth Min a Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 100.0 mm (21)
  • 128.0 mm (24)
  • 160.0 mm (29)
  • 200.0 mm (30)
Maximum Bore Depth Min a Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (104)
frontEnd
Adapter Front-End
Adapter Front-End
  • BORING BAR ADAPTER (25)
Clamp Style
Clamp Style
  • D (28)
  • N (11)
  • P (26)
  • S (39)
Cutting Width
Cutting Width
  • 0.039 in (8)
  • 0.047 in (8)
  • 0.06 in (8)
  • 0.062 in (8)
  • 0.069 in (8)
  • 0.073 in (8)
  • 0.078 in (8)
  • 0.079 in (8)
  • 0.088 in (8)
  • 0.089 in (5)
  • 0.094 in (3)
  • 0.095 in (8)
  • 0.097 in (8)
  • 0.098 in (8)
  • 0.105 in (8)
  • 0.108 in (8)
  • 0.11 in (8)
  • 0.119 in (10)
  • 0.122 in (8)
  • 0.125 in (10)
  • 0.126 in (10)
  • 0.128 in (8)
  • 0.131 in (3)
  • 0.138 in (10)
  • 0.143 in (8)
  • 0.156 in (8)
  • 0.157 in (10)
  • 0.167 in (10)
  • 0.169 in (8)
  • 0.177 in (10)
  • 0.178 in (8)
  • 0.185 in (9)
  • 0.188 in (10)
  • 0.189 in (10)
  • 0.192 in (3)
  • 0.193 in (3)
  • 0.195 in (8)
  • 0.197 in (2)
  • 0.202 in (2)
  • 0.213 in (2)
  • 0.217 in (2)
  • 0.218 in (1)
  • 0.219 in (2)
  • 0.237 in (2)
  • 0.25 in (3)
  • 0.255 in (2)
  • 0.281 in (1)
  • 0.312 in (1)
  • 0.375 in (1)
  • 0.383 in (1)
Cutting Width Min a Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (8)
  • 1.201 mm (8)
  • 1.5 mm (8)
  • 1.576 mm (8)
  • 1.75 mm (8)
  • 1.826 mm (8)
  • 1.975 mm (8)
  • 2.0 mm (8)
  • 2.2 mm (8)
  • 2.225 mm (8)
  • 2.25 mm (5)
  • 2.375 mm (3)
  • 2.401 mm (8)
  • 2.475 mm (8)
  • 2.5 mm (8)
  • 2.676 mm (8)
  • 2.75 mm (8)
  • 2.801 mm (8)
  • 3.0 mm (10)
  • 3.1 mm (8)
  • 3.176 mm (10)
  • 3.2 mm (10)
  • 3.25 mm (8)
  • 3.325 mm (3)
  • 3.5 mm (10)
  • 3.6 mm (8)
  • 3.95 mm (8)
  • 3.975 mm (3)
  • 4.0 mm (10)
  • 4.25 mm (10)
  • 4.3 mm (8)
  • 4.5 mm (10)
  • 4.525 mm (8)
  • 4.7 mm (9)
  • 4.775 mm (10)
  • 4.801 mm (10)
  • 4.875 mm (3)
  • 4.9 mm (3)
  • 4.95 mm (8)
  • 5.0 mm (2)
  • 5.125 mm (2)
  • 5.4 mm (2)
  • 5.5 mm (2)
  • 5.525 mm (1)
  • 5.575 mm (2)
  • 6.0 mm (2)
  • 6.351 mm (3)