Country

Idioma

Unidade de medida

Listar preços:

Desconto: %

Listar preços:

$87.36 /cada

Seu preço::

Qtd.

Configure

Brocas KMH • Materiais Duros • Sem Refrigeração

SDS

B941A (~3 x D) • KCH10 • A-Shank • KMH Drills

Name: B941A (~3 x D) • KCH10 • A-Shank • KMH Drills
SKU: 6358973
Rating: 0 (0 reviews)

Brocas KMH • Materiais Duros • Sem Refrigeração

Métrico

Polegada

SAP Material Number	6358973
ISO Catalog Number	B941A03300
ANSI Catalog Number	B941A03300
Grade	KCH10
[D1] Drill Diameter M	3.3 mm
[D1] Drill Diameter M	.1299 in
[L] Overall Length	62 mm
[L] Overall Length	2.44 in
[L3] Flute Length	20 mm
[L3] Flute Length	.7874 in
[L4] Maximum Drilling Depth	9 mm
[L4] Maximum Drilling Depth	.35 in
[L5] Drill Point Length	0.61 mm
[L5] Drill Point Length	.024 in
[LS] Shank Length	36 mm
[LS] Shank Length	1.417 in
[D] Adapter / Shank / Bore Diameter	6 mm
[D] Adapter / Shank / Bore Diameter	.2362 in

Ver todas as variantes de produtos

Usos e aplicações

Drilling
Drilling: Stacked Plates
Corner Style: Corner Chamfer
Dimensões da ferramenta: 2 canais/2 guias/sem refrigeração
Número DIN 6535
Número DIN 6537
Furação — Sem refrigeração
Refrigeração externa: Furação
Haste — Cilíndrica lisa ≤h6
Ângulo de hélice: 15°

Materiais das peças

P Steel

K Cast Iron

H Hardened Materials

Características e benefícios

The B94_ drill series without through coolant is specifically designed to machine hardened and surface hardened materials, using flood coolant. With its 145° point angle, it is also perfectly suited as pilot drill for the B95_ drill series with through coolant and 140° point for deeper applications.

KMH Point Design with curved cutting edge with corner chamfer for maximum corner stability in hard materials. It avoids chipping on cutting edge thus pre-mature wear.

Special flute design with strong web to increase the strength of the drill in tough applications with short chips. B94_ series with 15° helix angle to maximize stability in applications above 54 HRC.

Grade KCH10 on B94_ series consists of a special fine grain carbide substrate with higher hardness. It carries a high temperature and shock resistance AlTiN coating for machining hardened material to increase tool life.

Lateral da máquina

carregando...

Lateral da peça

carregando...

Tolerance • Metric
nominal size range	D1 tolerance m7	D tolerance h6
3–6	0,004/0,016	0,000/-0,008
6–10	0,006/0,021	0,000/-0,009
10–18	0,007/0,025	0,000/-0,011
18–25,4	0,008/0,029	0,000/-0,013

Tolerance • Inch
nominal size range	D1 tolerance m7	D tolerance h6
.1181 .2362	.0002/.0006	.0000/-.0003
.2362 .3937	.0002/.0008	.0000/-.0004
.3937 .7087	.0003/.0010	.0000/-.0004
.7087 1.0000	.0003/.0011	.0000/-.0005

Material Group			<="" td="">		<="" td="" />

Material Group		Cutting Speed vc			Inch
		Range SFM			Recommended Feed Rate per Rev
		Min	Starting Value	Max		1/8 .125	3/16 .188	1/4 .250	5/16 .313	3/8 .375	1/2 .500	5/8 .625	3/4 .750
P	4	160	230	330	IPR	.0024-.0059	.0031-.0067	.0047-.0091	.0055-.0110	.0067-.0130	.0075-.0150	.0091-.0185	.0114-.0232
	5	130	160	230	IPR	.0031–.0063	.0039–.0079	.0047–.0094	.0063–.0110	.0079–.0126	.0094–.0142	.0110–.0173	.0126–.0205
	6	100	130	200	IPR	.0020-.0028	.0024-.0039	.0031-.0055	.0039-.0071	.0047-.0087	.0055-.0094	.0071-.0126	.0091-.0161
K	1	260	430	490	IPR	.0043-.0087	.0047-.0094	.0063-.0122	.0079-.0150	.0091-.0173	.0098-.0193	.0122-.0024	.0150-.0185
	2	230	360	330	IPR	.0039–.0067	.0047–.0075	.0063–.0098	.0079–.0122	.0091–.0142	.0098–.0157	.0122–.0189	.0150–.0236
	3	260	360	390	IPR	.0028-.0059	.0035-.0075	.0047-.0098	.0055-.0118	.0067-.0138	.0075-.0157	.0098-.0189	.0118-.0236
H	1	70	100	130	IPR	.0012-.0024	.0016-.0031	.0024-.0039	.0031-.0047	.0035-.0051	.0039-.0055	.0047-.0063	.0055-.0071
	2	50	100	130	IPR	.0008–.0016	.0012–.0024	.0020–.0031	.0028–.0039	.0031–.0043	.0035–.0047	.0039–.0055	.0043–.0063
	3	50	80	110	IPR	.0008-.0016	.0008-.0020	.0016-.0028	.0024-.0035	.0028-.0039	.0031-.0043	.0035-.0051	.0039-.0059
	4	50	70	100	IPR	.0008–.0016	.0012–.0024	.0020–.0031	.0028–.0039	.0031–.0043	.0035–.0047	.0039–.0055	.0043–.0063

Material Group

<="" td="">

<="" td="" />

Cutting Speed vc

Metric

Range m/min

Recommended Feed Rate per Rev

Min

Starting Value

Max

3,0

4,0

6,0

8,0

10,0

12,0

16,0

20,0

100

mm/r

0,06–0,15

0,08–0,17

0,12–0,23

0,14–0,28

0,17–0,33

0,19–0,38

0,23–0,47

0,29–0,59

mm/r

0,08–0,16

0,10–0,20

0,12–0,24

0,16–0,28

0,20–0,32

0,24–0,36

0,28–0,44

0,32–0,52

mm/r

0,05–0,07

0,06–0,10

0,08–0,14

0,10–0,18

0,12–0,22

0,14–0,24

0,18–0,32

0,23–0,41

130

150

mm/r

0,11–0,22

0,12–0,24

0,16–0,31

0,20–0,38

0,23–0,44

0,25–0,49

0,31–0,06

0,38–0,47

110

100

mm/r

0,10–0,17

0,12–0,19

0,16–0,25

0,20–0,31

0,23–0,36

0,25–0,40

0,31–0,48

0,38–0,60

110

120

mm/r

0,07–0,15

0,09–0,19

0,12–0,25

0,14–0,30

0,17–0,35

0,19–0,40

0,25–0,48

0,30–0,60

mm/r

0,03–0,06

0,04–0,08

0,06–0,10

0,08–0,12

0,09–0,13

0,10–0,14

0,12–0,16

0,14–0,18

mm/r

0,02–0,04

0,03–0,06

0,05–0,08

0,07–0,10

0,08–0,11

0,09–0,12

0,10–0,14

0,11–0,16

mm/r

0,02–0,04

0,02–0,05

0,04–0,07

0,06–0,09

0,07–0,10

0,08–0,11

0,09–0,13

0,10–0,15

mm/r

0,02–0,04

0,03–0,06

0,05–0,08

0,07–0,10

0,08–0,11

0,09–0,12

0,10–0,14

0,11–0,16

<="" td="">

<="" td="" />

Cutting Speed vc

Metric

Range m/min

Recommended Feed Rate (f) by Diameter

Material Group

Min

Starting Value

Max

3,0

4,0

6,0

8,0

10,0

12,0

16,0

20,0

100

mm/r

0,06–0,15

0,08–0,17

0,12–0,23

0,14–0,28

0,17–0,33

0,19–0,38

0,23–0,47

0,29–0,59

mm/r

0,08–0,16

0,10–0,20

0,12–0,24

0,16–0,28

0,20–0,32

0,24–0,36

0,28–0,44

0,32–0,52

mm/r

0,05–0,07

0,06–0,10

0,08–0,14

0,10–0,18

0,12–0,22

0,14–0,24

0,18–0,32

0,23–0,41

130

150

mm/r

0,11–0,22

0,12–0,24

0,16–0,31

0,20–0,38

0,23–0,44

0,25–0,49

0,31–0,06

0,38–0,47

110

100

mm/r

0,10–0,17

0,12–0,19

0,16–0,25

0,20–0,31

0,23–0,36

0,25–0,40

0,31–0,48

0,38–0,60

110

120

mm/r

0,07–0,15

0,09–0,19

0,12–0,25

0,14–0,30

0,17–0,35

0,19–0,40

0,25–0,48

0,30–0,60

mm/r

0,03–0,06

0,04–0,08

0,06–0,10

0,08–0,12

0,09–0,13

0,10–0,14

0,12–0,16

0,14–0,18

mm/r

0,02–0,04

0,03–0,06

0,05–0,08

0,07–0,10

0,08–0,11

0,09–0,12

0,10–0,14

0,11–0,16

mm/r

0,02–0,04

0,02–0,05

0,04–0,07

0,06–0,09

0,07–0,10

0,08–0,11

0,09–0,13

0,10–0,15

mm/r

0,02–0,04

0,03–0,06

0,05–0,08

0,07–0,10

0,08–0,11

0,09–0,12

0,10–0,14

0,11–0,16

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Código de catálogo ISO	Classe

Bem-vindo!

Confirme suas preferências

Atualizar preferências

Sugestões de produtos

Product Family suggestions

Entre em contato com Dpto. Comercial

Entre em contato com Dpto. Comercial

Editando solução

Adicionando solução

B941A (~3 x D) • KCH10 • A-Shank • KMH Drills

Brocas KMH • Materiais Duros • Sem Refrigeração

Usos e aplicações

Materiais das peças

Características e benefícios

Lateral da máquina

Lateral da peça

Sugestões de produtos

Product Family suggestions

Entre em contato com Dpto. Comercial

Notificações

Entre em contato com Dpto. Comercial

Sending to SolidCAM in progress...

B941A (~3 x D) • KCH10 • A-Shank • KMH Drills

Brocas KMH • Materiais Duros • Sem Refrigeração

Usos e aplicações

Materiais das peças

Características e benefícios

Lateral da máquina

Lateral da peça