Country

Idioma

Unidade de medida

Listar preços:

Desconto: %

Listar preços:

$5,873.86 /cada

Seu preço::

Qtd.

Shoulder milling cutter with maximum tool stiffness for steel, stainless steel, and high-temperature alloys.

SDS

HARVI™ Ultra 8X • Helical Mill • SNHJ10 • Taper Flange Mount • For Corner Radius .031"-.125" (0,8-3,2mm) • Inch

Name: HARVI™ Ultra 8X • Helical Mill • SNHJ10 • Taper Flange Mount • For Corner Radius .031"-.125" (0,8-3,2mm) • Inch
SKU: 6366567
Rating: 0 (0 reviews)

Shoulder milling cutter with maximum tool stiffness for steel, stainless steel, and high-temperature alloys.

Métrico

Polegada

SAP Material Number	6366567
ISO Catalog Number	HU8X200S10F462ZU4AP422Z56
ANSI Catalog Number	HU8X200S10F462ZU4AP422Z56
[D1] Effective Cutting Diameter	50.8 mm
[D1] Effective Cutting Diameter	2 in
[D5] Body Diameter Machine Side	117.475 mm
[D5] Body Diameter Machine Side	4.625 in
[CSMS] System Size Machine Side	BTF46
[L] Overall Length	190.5 mm
[L] Overall Length	7.5 in
[AP1MAX] 1st Maximum Cutting Depth	107.28 mm
[AP1MAX] 1st Maximum Cutting Depth	4.223 in
Number of Inserts	56
[Z] Number of Flutes	4
Weight Pounds	8.4
Torque Catalog Inch Pounds	35
Max RPM	16000

Ver todas as variantes de produtos

Usos e aplicações

Slotting: Shoulder Profiling
Slotting: Shoulder
Shank: Flange Mount Milling
Fresamento lateral/fresamento de canto: topo reto
Fresamento lateral/fresamento de canto: chanfro suavizado
Fresamento — Refrigeração interna
Fresamento de cavidade

Materiais das peças

P Steel

M Stainless Steel

S High-Temp Alloys

Características e benefícios

Designed for aerospace airframe structural component machining, targeting maximum metal removal rates (MRR).

Taper flange provides higher stability than straight flanges, adding unequaled benind moment resistance.

Internal coolant supply.

Adjustable coolant nozzles support chip evacuation and control heat in the cutting zone.

Large helix ensures hassle-free chip evacuation event at highest metal removal rates (MRR).

Lateral da máquina

carregando...

Lateral da peça

carregando...

Guia de seleção de insertos

HARVI™ Ultra 8X • Insert Selection Guide II - using inserts KSSM8+ (SNPJ12-GD)
Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance		<="" td="">		toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	.S..GD	KCPK30	.S..GD	KCPK30	.S..GD	KCPM40
P3–P4	.S..GD	KCPK30	.S..GD	KCPK30	.S..GD	KCPM40
P5–P6	.S..GD	KCPK30	.S..GD	KCPK30	.S..GD	KCPM40
M1–M2	.S..GD	KCPK30	.S..GD	KCPK30	.S..GD	KCPM40
M3	.S..GD	KCPK30	.S..GD	KCPK30	.S..GD	KCPM40
K1–K2	.S..GD	KCK20B	.S..GD	KCK20B	.S..GD	KCK15
K3	.S..GD	KCK20B	.S..GD	KCK20B	.S..GD	KCK20B
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	–	–	–	–	–	–
H1	–	–	–	–	–	–

HARVI™ Ultra 8X • Insert Selection Guide I
Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance		<="" td="">		toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	.E..LEH	KCSM40	.E..LEH	KCSM40	.S..GDH	KCSM40
P3–P4	.E..LEH	KCSM40	.E..LEH	KCSM40	.S..GDH	KCSM40
P5–P6	.E..LEH	KCSM40	.E..LEH	KCSM40	.S..GDH	KCSM40
M1–M2	.E..LEH	KCSM40	.E..LEH	KCSM40	.S..GDH	KCSM40
M3	.E..LEH	KCSM40	.S..GDH	KCSM40	.S..GDH	KCSM40
K1–K2	–	–	–	–	–	–
K3	–	–	–	–	–	–
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.E..LEH	KCSM40	.E..LEH	KCSM40	.S..GDH	KCSM40
S3	.E..LEH	KCSM40	.S..GDH	KCSM40	.S..GDH	KCSM40
S4	.E..LEH	KCSM40	.S..GDH	KCSM40	.S..GDH	KCSM40
H1	–	–	–	–	–	–

Recommended Starting Feeds [IPT]

HARVI™ Ultra 8X • Recommended Starting Feeds [IPT]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H
HARVI Ultra 8X - SNHJ....E..LEH	0.004	0.007	0.008	0.003	0.005	0.006	0.002	0.004	0.005	0.002	0.004	0.005
HARVI Ultra 8X - SNHJ....S..GDH	0.005	0.008	0.010	0.004	0.006	0.008	0.003	0.005	0.007	0.003	0.005	0.006
KSSM8+ - SNPJ…..S..GD	0.007	0.015	0.023	0.005	0.011	0.017	0.004	0.009	0.015	0.004	0.009	0.014
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

Avanços iniciais recomendados [mm]

HARVI™ Ultra 8X • Recommended Starting Feeds [mm/th]
Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)
	10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H
HARVI Ultra 8X - SNHJ....E..LEH	0.09	0.17	0.23	0.07	0.13	0.18	0.06	0.11	0.15	0.06	0.10	0.14
HARVI Ultra 8X - SNHJ....S..GDH	0.13	0.20	0.31	0.10	0.15	0.23	0.09	0.13	0.20	0.08	0.12	0.18
KSSM8+ - SNPJ…..S..GD	0,17	0,37	0,59	0,13	0,27	0,44	0,11	0,24	0,38	0,10	0,22	0,35
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

HARVI™ Ultra 8X • Recommended Starting Speed [SFM]
Grade		KC725M			KCK15			KCPK30			KCK20B			KCPM40			KCSM40
Chip Thickness hex Inch		Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min
P	1	855	755	705	–	–	–	1495	1295	1215	–	–	–	970	855	805	1150	1050	985
	2	720	625	525	–	–	–	920	835	755	–	–	–	820	705	590	985	885	720
	3	655	560	460	–	–	–	835	755	675	–	–	–	755	640	525	920	785	640
	4	590	490	395	–	–	–	740	605	525	–	–	–	675	560	445	785	675	540
	5	490	445	395	–	–	–	625	560	490	–	–	–	560	510	445	655	590	525
	6	425	330	260	–	–	–	525	445	360	–	–	–	490	375	295	590	460	330
M	1	560	490	445	–	–	–	675	605	510	–	–	–	640	560	510	855	690	605
	2	510	425	360	–	–	–	605	525	460	–	–	–	575	490	410	770	590	475
	3	375	330	260	–	–	–	475	425	375	–	–	–	425	375	295	575	475	360
K	1	–	–	–	1380	1265	1115	970	870	785	1180	950	805	–	–	–	–	–	–
	2	–	–	–	1100	970	900	770	690	625	920	755	640	–	–	–	–	–	–
	3	–	–	–	920	820	755	640	575	525	690	575	460	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	115	100	80	–	–	–	–	–	–	–	–	–	130	115	100	165	130	80
	2	115	100	80	–	–	–	–	–	–	–	–	–	130	115	100	180	130	80
	3	150	115	80	–	–	–	–	–	–	–	–	–	165	130	100	215	150	100
	4	165	150	100	–	–	–	165	150	115	–	–	–	180	165	115	245	195	130
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

Velocidades iniciais recomendadas [m/min.]

HARVI™ Ultra 8X • Recommended Starting Speed [m/min]
Grade		KC725M			KCK15			KCPK30			KCK20B			KCPM40			KCSM40
Chip Thickness hex mm		Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min
P	1	260	230	215	–	–	–	455	395	370	–	–	–	295	260	245	350	320	300
	2	220	190	160	–	–	–	280	255	230	–	–	–	250	215	180	300	270	220
	3	200	170	140	–	–	–	255	230	205	–	–	–	230	195	160	280	240	195
	4	180	150	120	–	–	–	225	185	160	–	–	–	205	170	135	240	205	165
	5	150	135	120	–	–	–	190	170	150	–	–	–	170	155	135	200	180	160
	6	130	100	80	–	–	–	160	135	110	–	–	–	150	115	90	180	140	100
M	1	170	150	135	–	–	–	205	185	155	–	–	–	195	170	155	260	210	185
	2	155	130	110	–	–	–	185	160	140	–	–	–	175	150	125	235	180	145
	3	115	100	80	–	–	–	145	130	115	–	–	–	130	115	90	175	145	110
K	1	–	–	–	420	385	340	295	265	240	360	290	245	–	–	–	–	–	–
	2	–	–	–	335	295	275	235	210	190	280	230	195	–	–	–	–	–	–
	3	–	–	–	280	250	230	195	175	160	210	175	140	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30	50	40	25
	2	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30	55	40	25
	3	45	35	25	–	–	–	–	–	–	–	–	–	50	40	30	65	45	30
	4	50	45	30	–	–	–	50	45	35	–	–	–	55	50	35	75	60	40
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Código de catálogo ISO	Classe

Bem-vindo!

Confirme suas preferências

Atualizar preferências

Sugestões de produtos

Product Family suggestions

Entre em contato com Dpto. Comercial

Entre em contato com Dpto. Comercial

Editando solução

Adicionando solução

HARVI™ Ultra 8X • Helical Mill • SNHJ10 • Taper Flange Mount • For Corner Radius .031"-.125" (0,8-3,2mm) • Inch