Country

Idioma

Unidade de medida

Listar preços:

Desconto: %

Listar preços:

$883.82 /cada

Seu preço::

Qtd.

SDS

KCRA - RN • Face Mills • Inch

Name: KCRA - RN • Face Mills • Inch
SKU: 5703936
Rating: 0 (0 reviews)

Face Mills

Métrico

Polegada

SAP Material Number	5703936
ISO Catalog Number	KCRA200RN4304S075L175
ANSI Catalog Number	KCRA200RN4304S075L175
[D1MAX] Maximum Cutting Diameter	50.8 mm
[D1MAX] Maximum Cutting Diameter	2 in
[D1] Effective Cutting Diameter	38.1 mm
[D1] Effective Cutting Diameter	1.5 in
[D] Adapter / Shank / Bore Diameter	19.05 mm
[D] Adapter / Shank / Bore Diameter	.75 in
[D6] Hub Diameter	42 mm
[D6] Hub Diameter	1.653 in
[L] Overall Length	44.45 mm
[L] Overall Length	1.75 in
[AP1MAX] 1st Maximum Cutting Depth	6.35 mm
[AP1MAX] 1st Maximum Cutting Depth	.25 in
Number of Inserts	4
Max RPM	23400
Weight Pounds	0.97
Gage Insert	RNGN120400

Ver todas as variantes de produtos

Usos e aplicações

Milling - Pressurized Air Coolant
Fresamento de face
Fresamento lateral/fresamento de canto: ponta esférica
Fresamento — Lateral e de face

Materiais das peças

P Steel

S High-Temp Alloys

Características e benefícios

First choice for face and shoulder milling high-temperature alloys.

Higher material removal rate due to fine pitch cutters.

Secure clamping system, improving process stability and reliability.

Effective air coolant feature. Better chip flow and increased insert tool life.

Lateral da máquina

carregando...

Lateral da peça

carregando...

Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance		<="" td="">		toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	–	–	–	–	–	–
P3–P4	–	–	–	–	–	–
P5–P6	–	–	–	–	–	–
M1–M2	–	–	–	–	–	–
M3	–	–	–	–	–	–
K1–K2	–	–	–	–	–	–
K3	–	–	–	–	–	–
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.EGN	KYS30	.EGN	KYS30	.TGN	KYS30
S3	.EGN	KYSP30	.EGN	KYSP30	.TGN	KYSP30
S4	–	–	–	–	–	–
H1	–	–	–	–	–	–

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.EGN	.003	.004	.005	.003	.003	.003	.002	.002	.003	.002	.002	.003	.002	.002	.003	.EGN
.TGN	.005	.007	.008	.004	.005	.006	.003	.004	.005	.003	.004	.005	.003	.004	.005	.TGN

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.EGN	.004	.004	.005	.003	.003	.004	.003	.003	.003	.002	.003	.003	.002	.003	.003	.EGN
.TGN	.006	.008	.009	.004	.006	.007	.004	.005	.006	.004	.005	.005	.003	.005	.005	.TGN

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.EGN	.007	.008	.009	.005	.006	.007	.005	.005	.006	.004	.005	.006	.004	.005	.006	.EGN
.TGN	.010	.014	.016	.008	.010	.012	.007	.009	.010	.006	.008	.010	.006	.008	.010	.TGN

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.EGN	.005	.006	.007	.004	.004	.005	.003	.004	.004	.003	.003	.004	.003	.003	.004	.EGN
.TGN	.008	.010	.012	.006	.008	.009	.005	.007	.008	.005	.006	.007	.005	.006	.007	.TGN

Guia de montagem do inserto

Safety Notes
<="" td="">	<="" td="">	<="" td="">	<="" td="">	<="" td="">	<="" td="" />
Read all instructions carefully	Wear eye protection	Inspect and tighten fasteners regularly	Warning: Cutting hazard	Warning: Hot surfaces	Do not exceed maximum RPM

Assembly Instructions
Assemble STCM-25 screw to KW1008 wedge, 1 to 1 1/2 turns.	Wedge/screw assembly.
<="" td="">	<="" td="" />
Install wedge/screw assembly into cutter body, but maintain assembly gap for installing insert.	Slide insert, RNGN12... into pocket and torque wedge/insert assembly to 3,5 Nm (31 in/lbs). Repeat for each pocket.
<="" td="">	<="" td="" />

Recommended Starting Speeds [SFM]

Material Group		KYS30			KYSP30
P	1	–	–	–	–	–	–
	2	–	–	–	–	–	–
	3	–	–	–	–	–	–
	4	–	–	–	–	–	–
	5	–	–	–	–	–	–
	6	–	–	–	–	–	–
M	1	–	–	–	–	–	–
	2	–	–	–	–	–	–
	3	–	–	–	–	–	–
K	1	–	–	–	–	–	–
	2	–	–	–	–	–	–
	3	–	–	–	–	–	–
N	1	–	–	–	–	–	–
	2	–	–	–	–	–	–
S	1	2640	2160	1680	2640	2160	1680
	2	2640	2160	1680	2640	2160	1680
	3	3840	3120	2400	3840	3120	2400
	4	–	–	–	–	–	–
H	1	–	–	–	–	–	–
	2	–	–	–	–	–	–
	3	–	–	–	–	–	–

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Código de catálogo ISO	Classe

Bem-vindo!

Confirme suas preferências

Atualizar preferências

Sugestões de produtos

Product Family suggestions

Entre em contato com Dpto. Comercial

Entre em contato com Dpto. Comercial

Editando solução

Adicionando solução