A2™ • Single-Ended Cut-Off
If your machining operations depend on accurate single-ended cut-off tools, you can immediately improve your processes with A2 cut-off tools. These solid carbide tools are optimal for high-speed applications with cast iron, non-ferrous metals, and other tough workpiece materials. When you use cut-off tools from Kennametal's A2 line, you achieve consistency while reducing downtime with inferior tools. If you have questions about our A2 line or need a specialty tool, our design team is ready to assist.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (253)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(253)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(253)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(253)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(253)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(253)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(253)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(253)
- M Stainless Steel (233)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(233)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(233)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(233)
- K Cast Iron (196)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(196)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(196)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(196)
- N Non-Ferrous Materials (212)
- N1Wrought Aluminum (212)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(211)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (212)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (211)
- N6Carbon, Graphite Composites, CFRP (211)
- S High-Temp Alloys (218)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(218)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(218)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(218)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(218)
Applications
Applications
Cut-Off (255)
Face Grooving (62)
Grooving (62)
ID Grooving (62)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (209)
- Lightly Interrupted Cut (245)
- Smooth Cut (254)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (76)
to
Connection Style
Connection Style
- Cutoff Support Blade A1-A3 (36)
- Toolholder (40)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (255)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 75.0 mm(2)
- 86.0 mm(7)
- 86.25 mm(2)
- 90.2 mm(2)
- 90.25 mm(1)
- 100.2 mm(1)
- 110.0 mm(20)
- 110.2 mm(2)
- 110.25 mm(12)
- 110.3 mm(1)
- 114.3 mm(5)
- 125.0 mm(8)
- 125.25 mm(4)
- 127.0 mm(6)
- 130.0 mm(6)
- 135.0 mm(3)
- 150.0 mm(3)
- 150.2 mm(3)
- 150.25 mm(4)
- 150.3 mm(2)
- 152.4 mm(4)
- 260.15 mm(1)
to
Availability
gsaApproval
gsaApproval
Corner Radius
Corner Radius
- 0.1 mm(51)
- 0.15 mm(23)
- 0.2 mm(122)
- 0.3 mm(92)
- 0.4 mm(15)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(179)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC5025 (125)
- KCU25 (132)
- KCU25B (139)
- KMF (31)
- KMS (20)
- KT315 (77)
Hand Of Tool
Hand Of Tool
- L (24)
- N (22)
- R (30)
Wiper Insert
Wiper Insert
- N (255)
F Dimension
F Dimension
- 1.25 mm(3)
- 9.627 mm(2)
- 10.125 mm(1)
- 12.125 mm(1)
- 12.2 mm(4)
- 12.36 mm(4)
- 12.802 mm(2)
- 12.929 mm(2)
- 16.2 mm(2)
- 16.36 mm(2)
- 19.152 mm(1)
- 19.406 mm(4)
- 20.1 mm(1)
- 20.2 mm(2)
- 20.25 mm(1)
- 20.36 mm(4)
- 25.3 mm(2)
- 25.36 mm(1)
- 25.756 mm(4)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(6)
- 20.066 mm(6)
- 30.0 mm(4)
- 34.0 mm(1)
- 38.0 mm(1)
- 41.91 mm(1)
- 42.0 mm(14)
- 45.0 mm(2)
- 52.0 mm(6)
- 52.07 mm(2)
- 61.976 mm(6)
- 62.0 mm(4)
- 63.0 mm(2)
- 66.0 mm(4)
to
Cutting Direction
Cutting Direction
- E (76)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (53)
- POSITIVE-ZERO (20)
Front-End
Clamp Style
Clamp Style
- Y (76)
Cutting Width
Cutting Width
- 1.4 mm(6)
- 1.55 mm(14)
- 1.6 mm(36)
- 2.2 mm(63)
- 3.0 mm(73)
- 3.05 mm(35)
- 3.1 mm(34)
- 4.0 mm(25)
- 4.05 mm(17)
- 5.0 mm(15)
- 6.0 mm(10)
- 8.0 mm(7)
to
Insert Shape
Insert Shape
- PRISMATIC (255)
Insert Size
Insert Size
- 1 (5)
- 2 (2)
- 3 (7)
- 4 (1)
Maximum Cutting Depth
Maximum Cutting Depth
- 9.906 mm(6)
- 10.0 mm(6)
- 15.0 mm(3)
- 16.0 mm(15)
- 16.002 mm(4)
- 17.0 mm(1)
- 19.0 mm(1)
- 20.0 mm(1)
- 21.0 mm(9)
- 25.0 mm(3)
- 25.908 mm(5)
- 26.0 mm(5)
- 33.0 mm(4)
- 40.0 mm(6)
- 50.0 mm(3)
- 60.0 mm(3)
- 120.0 mm(1)
to
Insert Geometry
Shape
Shape
- PRISMATIC (179)
Insert Seat Size
Insert Seat Size
- 1 (28)
- 1B (3)
- 2 (44)
- 3 (49)
- 4 (28)
- 5 (13)
- 6 (8)
- 8 (6)
Cutting Tool Material
Cutting Tool Material
- H T (77)
- H W (246)
Back-End
Connection Type
Connection Type
- CUTOFF BLADE (36)
- SQUARE SHANK (40)
Shank Height
Shank Height
- 9.525 mm(2)
- 10.0 mm(1)
- 12.0 mm(9)
- 12.7 mm(4)
- 15.875 mm(1)
- 16.0 mm(5)
- 19.0 mm(2)
- 19.05 mm(8)
- 20.0 mm(11)
- 25.0 mm(6)
- 25.4 mm(7)
- 26.0 mm(17)
- 31.75 mm(3)
- 32.0 mm(18)
- 38.1 mm(2)
- 40.0 mm(1)
- 50.0 mm(1)
- 52.475 mm(1)
to
Shank Width
Shank Width
- 1.78 mm(3)
- 1.8 mm(6)
- 2.4 mm(7)
- 3.4 mm(2)
- 4.4 mm(2)
- 5.4 mm(2)
- 7.0 mm(1)
- 7.95 mm(13)
- 9.525 mm(2)
- 10.0 mm(1)
- 12.0 mm(9)
- 12.7 mm(4)
- 15.875 mm(1)
- 16.0 mm(5)
- 19.0 mm(1)
- 19.05 mm(8)
- 20.0 mm(11)
- 23.0 mm(2)
- 25.0 mm(4)
- 25.4 mm(7)
- 28.0 mm(1)
- 31.75 mm(3)
- 35.0 mm(1)
- 38.0 mm(1)
- 38.1 mm(2)
to
No filters matching ""
