Drill Fix DFSP • Пластины

Выбрать фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (101)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (101)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (101)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (101)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (101)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (101)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (89)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (89)
  • M Stainless Steel (96)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (96)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (96)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (84)
  • K Cast Iron (84)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (84)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (84)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (84)
  • N Non-Ferrous Materials (81)
    • N1
      Wrought Aluminum (81)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (81)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (81)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (75)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (75)
    • N6
      Carbon, Graphite Composites, CFRP (75)
    • N7
      MMC's (75)
  • S High-Temp Alloys (81)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (75)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (75)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (81)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (81)
  • H Hardened Materials (9)
    • H1
      Hardened Materials 44-48 HRC (9)
    • H2
      Hardened Materials 48-55 HRC (9)
    • H3
      Hardened Materials 56-60 HRC (9)
    • H4
      Hardened Materials >60 HRC (9)
Выбрать First Choice
  • BR (25)
  • CN (75)
  • DE (75)
  • GB (57)
  • IN (31)
  • SG (55)
  • US (75)
Cutting Condition
Cutting Condition
  • Interrupted (36)
  • Stable (63)
  • Unstable (54)
cornerConfiguration
Corner Radius
Corner Radius
  • 0.016 in (32)
  • 0.031 in (44)
  • 0.039 in (11)
  • 0.047 in (22)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (32)
  • 0.8 mm (44)
  • 1.0 mm (11)
  • 1.201 mm (22)
Corner Radius Min до Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC7140 (12)
  • KCMS35 (8)
  • KCPK10 (19)
  • KCU25 (35)
  • KCU40 (35)
insertGeometry
Insert IC Size
Insert IC Size
  • 5.426 mm (2)
  • 5.551 mm (6)
  • 6.351 mm (12)
  • 7.801 mm (2)
  • 7.95 mm (21)
  • 9.525 mm (22)
  • 12.701 mm (22)
  • 15.726 mm (22)
Insert IC Size Min до Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.214 in (2)
  • 0.219 in (6)
  • 0.25 in (12)
  • 0.307 in (2)
  • 0.313 in (21)
  • 0.375 in (22)
  • 0.5 in (22)
  • 0.619 in (22)
Insert IC Size Min до Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 5.426 mm (8)
  • 6.2 mm (12)
  • 7.801 mm (17)
  • 7.926 mm (6)
  • 9.375 mm (22)
  • 12.55 mm (16)
  • 12.701 mm (6)
  • 15.726 mm (22)
Cutting Edge Length Min до Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.214 in (8)
  • 0.244 in (12)
  • 0.307 in (17)
  • 0.312 in (6)
  • 0.369 in (22)
  • 0.494 in (16)
  • 0.5 in (6)
  • 0.619 in (22)
Cutting Edge Length Min до Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • FP (27)
  • HP (34)
  • LP (12)
  • MD (36)
Tolerance Class
Tolerance Class
  • G (41)
  • P (68)
No filters matching ""
Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
product-image
Please adjust the following properties from

Номер по каталогу ISO

Номер по каталогу ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
Session expired due to inactivity, please login again
Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
товар(-ы) успешно добавлен(-ы) в корзину

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Номер по каталогу ISO Сплав    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?