successfully added to cart
View Cart

Notifications

Mark all as read

Модульная система сверления KSEM

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1389)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1389)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1389)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1389)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1389)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1193)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1193)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1164)
  • M Stainless Steel (1060)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1060)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1060)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1060)
  • K Cast Iron (1081)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1081)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1081)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1081)
  • N Non-Ferrous Materials (944)
    • N1
      Wrought Aluminum
      (944)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (944)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (944)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (944)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (864)
    • N6
      Carbon, Graphite Composites, CFRP
      (864)
    • N7
      MMC's
      (864)
  • S High-Temp Alloys (944)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (944)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (944)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (944)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (944)
  • H Hardened Materials (29)
    • H1
      Hardened Materials 44-48 HRC
      (29)
    • H2
      Hardened Materials 48-55 HRC
      (29)
    • H3
      Hardened Materials 56-60 HRC
      (29)
    • H4
      Hardened Materials >60 HRC
      (29)
Select First Choice
  • BR (111)
  • CN (265)
  • DE (245)
  • GB (197)
  • IN (189)
  • SG (161)
  • US (258)
Applications
Applications
  • Countersinking Countersinking (42)
  • Drilling Drilling (595)
  • Inclined Entry Drilling Inclined Entry Drilling (549)
  • Inclined Exit Drilling Inclined Exit Drilling (549)
  • Stacked Plates Drilling Stacked Plates Drilling (549)
Cutting Diameter
Cutting Diameter
  • 0.4921 in (29)
  • 0.5 in (27)
  • 0.5039 in (25)
  • 0.509 in (24)
  • 0.5118 in (37)
  • 0.5157 in (25)
  • 0.516 in (26)
  • 0.5197 in (26)
  • 0.531 in (26)
  • 0.5315 in (24)
  • 0.5512 in (30)
  • 0.5709 in (23)
  • 0.5906 in (36)
  • 0.5937 in (25)
  • 0.594 in (25)
  • 0.6102 in (30)
  • 0.6299 in (30)
  • 0.6315 in (23)
  • 0.6335 in (23)
  • 0.6339 in (23)
  • 0.634 in (26)
  • 0.6358 in (24)
  • 0.6374 in (23)
  • 0.6378 in (27)
  • 0.6406 in (24)
  • 0.641 in (26)
  • 0.6496 in (30)
  • 0.6693 in (32)
  • 0.672 in (25)
  • 0.689 in (31)
  • 0.7283 in (23)
  • 0.748 in (42)
  • 0.75 in (37)
  • 0.7559 in (29)
  • 0.757 in (30)
  • 0.7571 in (28)
  • 0.7579 in (31)
  • 0.7587 in (28)
  • 0.759 in (31)
  • 0.7606 in (28)
  • 0.7618 in (29)
  • 0.7622 in (27)
  • 0.763 in (27)
  • 0.7657 in (30)
  • 0.766 in (29)
  • 0.7677 in (44)
  • 0.8071 in (28)
  • 0.8268 in (28)
  • 0.846 in (23)
  • 0.8701 in (25)
  • 0.872 in (24)
  • 0.875 in (25)
  • 0.8752 in (27)
  • 0.8835 in (26)
  • 0.884 in (25)
  • 0.8858 in (34)
  • 0.8906 in (24)
  • 0.9055 in (25)
  • 0.9252 in (32)
  • 0.9449 in (24)
  • 0.9843 in (48)
  • 0.987 in (36)
  • 0.9941 in (30)
  • 0.9961 in (30)
  • 1.0 in (36)
  • 1.0039 in (37)
  • 1.0055 in (29)
  • 1.0079 in (24)
  • 1.008 in (27)
  • 1.0098 in (25)
  • 1.01 in (25)
  • 1.0106 in (28)
  • 1.011 in (24)
  • 1.0126 in (24)
  • 1.0142 in (24)
  • 1.0157 in (23)
  • 1.016 in (23)
  • 1.0161 in (27)
  • 1.0433 in (23)
  • 1.063 in (27)
  • 1.0827 in (25)
  • 1.122 in (26)
  • 1.1417 in (29)
  • 1.1614 in (24)
  • 1.2008 in (28)
  • 1.2402 in (27)
  • 1.25 in (25)
  • 1.2598 in (30)
  • 1.2992 in (27)
  • 1.3386 in (30)
  • 1.3583 in (23)
  • 1.378 in (30)
  • 1.3976 in (24)
  • 1.406 in (23)
  • 1.4173 in (31)
  • 1.4567 in (24)
  • 1.4961 in (30)
  • 1.5 in (25)
  • 1.5354 in (29)
  • 1.5748 in (25)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.5 mm (29)
  • 12.6 mm (22)
  • 12.7 mm (27)
  • 12.8 mm (25)
  • 12.93 mm (25)
  • 13.0 mm (37)
  • 13.1 mm (27)
  • 13.2 mm (26)
  • 13.5 mm (29)
  • 14.0 mm (30)
  • 14.1 mm (22)
  • 14.29 mm (22)
  • 14.5 mm (23)
  • 15.0 mm (36)
  • 15.08 mm (27)
  • 15.5 mm (30)
  • 16.0 mm (30)
  • 16.04 mm (23)
  • 16.09 mm (27)
  • 16.1 mm (23)
  • 16.15 mm (24)
  • 16.19 mm (23)
  • 16.2 mm (27)
  • 16.27 mm (28)
  • 16.5 mm (30)
  • 17.0 mm (32)
  • 17.07 mm (25)
  • 17.46 mm (22)
  • 17.5 mm (31)
  • 18.5 mm (23)
  • 19.0 mm (42)
  • 19.05 mm (37)
  • 19.2 mm (29)
  • 19.228 mm (30)
  • 19.23 mm (28)
  • 19.25 mm (31)
  • 19.27 mm (32)
  • 19.32 mm (28)
  • 19.35 mm (29)
  • 19.36 mm (27)
  • 19.38 mm (27)
  • 19.45 mm (32)
  • 19.5 mm (44)
  • 20.5 mm (28)
  • 21.0 mm (28)
  • 21.5 mm (26)
  • 22.0 mm (22)
  • 22.1 mm (25)
  • 22.15 mm (24)
  • 22.23 mm (29)
  • 22.44 mm (28)
  • 22.5 mm (34)
  • 22.62 mm (24)
  • 23.0 mm (25)
  • 23.5 mm (32)
  • 24.0 mm (24)
  • 24.5 mm (22)
  • 25.0 mm (48)
  • 25.07 mm (36)
  • 25.25 mm (30)
  • 25.3 mm (30)
  • 25.4 mm (36)
  • 25.5 mm (37)
  • 25.54 mm (29)
  • 25.6 mm (27)
  • 25.61 mm (24)
  • 25.65 mm (25)
  • 25.654 mm (25)
  • 25.67 mm (29)
  • 25.72 mm (24)
  • 25.76 mm (24)
  • 25.8 mm (23)
  • 25.806 mm (23)
  • 25.81 mm (27)
  • 26.0 mm (22)
  • 26.5 mm (23)
  • 27.0 mm (27)
  • 27.5 mm (25)
  • 28.0 mm (22)
  • 28.5 mm (26)
  • 29.0 mm (29)
  • 29.5 mm (24)
  • 30.5 mm (28)
  • 31.0 mm (22)
  • 31.5 mm (27)
  • 31.75 mm (25)
  • 32.0 mm (30)
  • 33.0 mm (27)
  • 34.0 mm (30)
  • 34.5 mm (23)
  • 35.0 mm (30)
  • 35.5 mm (24)
  • 35.72 mm (23)
  • 36.0 mm (31)
  • 37.0 mm (24)
  • 38.0 mm (30)
  • 38.1 mm (25)
  • 38.46 mm (23)
  • 39.0 mm (29)
  • 40.0 mm (25)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 13.462 mm (1)
  • 13.5 mm (1)
  • 14.5 mm (2)
  • 18.0 mm (2)
  • 22.0 mm (2)
  • 24.0 mm (2)
  • 26.0 mm (2)
  • 28.0 mm (2)
  • 30.0 mm (2)
  • 32.0 mm (2)
  • 36.0 mm (2)
  • 38.1 mm (2)
  • 38.786 mm (2)
  • 40.0 mm (2)
  • 40.483 mm (2)
  • 41.671 mm (2)
  • 42.0 mm (5)
  • 42.863 mm (2)
  • 44.054 mm (2)
  • 45.245 mm (2)
  • 46.434 mm (2)
  • 48.0 mm (6)
  • 52.07 mm (3)
  • 54.0 mm (5)
  • 57.15 mm (2)
  • 59.944 mm (5)
  • 60.0 mm (6)
  • 63.5 mm (3)
  • 64.643 mm (2)
  • 65.484 mm (3)
  • 66.0 mm (5)
  • 66.675 mm (2)
  • 69.454 mm (2)
  • 70.0 mm (5)
  • 71.438 mm (2)
  • 71.882 mm (3)
  • 72.0 mm (7)
  • 75.408 mm (2)
  • 77.391 mm (2)
  • 77.978 mm (2)
  • 78.0 mm (7)
  • 80.0 mm (7)
  • 84.0 mm (5)
  • 84.074 mm (3)
  • 88.9 mm (2)
  • 89.916 mm (6)
  • 90.0 mm (12)
  • 95.25 mm (2)
  • 96.0 mm (8)
  • 98.0 mm (4)
  • 99.0 mm (5)
  • 100.0 mm (11)
  • 100.013 mm (2)
  • 100.076 mm (3)
  • 102.0 mm (4)
  • 105.0 mm (4)
  • 108.0 mm (4)
  • 109.982 mm (2)
  • 110.0 mm (6)
  • 111.0 mm (5)
  • 112.0 mm (6)
  • 114.0 mm (3)
  • 117.0 mm (4)
  • 119.888 mm (2)
  • 120.0 mm (14)
  • 126.0 mm (6)
  • 127.0 mm (2)
  • 130.0 mm (14)
  • 135.0 mm (2)
  • 139.954 mm (2)
  • 140.0 mm (17)
  • 145.0 mm (2)
  • 150.0 mm (9)
  • 150.114 mm (2)
  • 152.4 mm (2)
  • 154.0 mm (6)
  • 160.0 mm (14)
  • 162.7 mm (2)
  • 165.0 mm (4)
  • 168.0 mm (8)
  • 170.0 mm (3)
  • 174.6 mm (2)
  • 175.0 mm (3)
  • 177.8 mm (2)
  • 180.0 mm (4)
  • 182.0 mm (8)
  • 185.0 mm (5)
  • 190.0 mm (3)
  • 190.5 mm (5)
  • 195.0 mm (3)
  • 196.0 mm (7)
  • 200.0 mm (3)
  • 203.2 mm (2)
  • 210.0 mm (7)
  • 224.0 mm (8)
  • 225.0 mm (2)
  • 245.0 mm (2)
  • 254.0 mm (4)
  • 265.0 mm (2)
  • 285.0 mm (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.5315 in (2)
  • 0.7087 in (2)
  • 0.8661 in (2)
  • 0.9449 in (2)
  • 1.1024 in (3)
  • 1.1811 in (2)
  • 1.4173 in (2)
  • 1.5 in (2)
  • 1.527 in (2)
  • 1.5748 in (2)
  • 1.5938 in (2)
  • 1.6406 in (2)
  • 1.6535 in (5)
  • 1.6875 in (2)
  • 1.7344 in (2)
  • 1.7813 in (2)
  • 1.8281 in (2)
  • 1.8898 in (6)
  • 2.05 in (3)
  • 2.126 in (5)
  • 2.25 in (2)
  • 2.36 in (5)
  • 2.3622 in (6)
  • 2.5 in (3)
  • 2.545 in (2)
  • 2.5781 in (3)
  • 2.5984 in (5)
  • 2.625 in (2)
  • 2.7344 in (2)
  • 2.7559 in (5)
  • 2.8125 in (2)
  • 2.83 in (3)
  • 2.8346 in (7)
  • 2.9688 in (2)
  • 3.0469 in (2)
  • 3.07 in (2)
  • 3.0709 in (7)
  • 3.1496 in (7)
  • 3.3071 in (5)
  • 3.31 in (3)
  • 3.5 in (2)
  • 3.54 in (6)
  • 3.5433 in (12)
  • 3.75 in (2)
  • 3.7795 in (6)
  • 3.78 in (3)
  • 3.8583 in (4)
  • 3.8976 in (2)
  • 3.898 in (3)
  • 3.937 in (11)
  • 3.9375 in (2)
  • 3.94 in (3)
  • 4.016 in (3)
  • 4.134 in (3)
  • 4.252 in (4)
  • 4.33 in (2)
  • 4.3307 in (6)
  • 4.37 in (3)
  • 4.3701 in (2)
  • 4.4094 in (6)
  • 4.488 in (2)
  • 4.606 in (3)
  • 4.72 in (2)
  • 4.7244 in (13)
  • 4.9606 in (6)
  • 5.0 in (2)
  • 5.1181 in (14)
  • 5.315 in (2)
  • 5.51 in (2)
  • 5.5118 in (17)
  • 5.7087 in (2)
  • 5.9055 in (9)
  • 5.91 in (2)
  • 6.0 in (2)
  • 6.063 in (6)
  • 6.2992 in (13)
  • 6.4055 in (2)
  • 6.484 in (2)
  • 6.4961 in (4)
  • 6.6142 in (8)
  • 6.6929 in (3)
  • 6.72 in (2)
  • 6.874 in (2)
  • 6.8898 in (3)
  • 7.0 in (2)
  • 7.031 in (2)
  • 7.0866 in (4)
  • 7.11 in (2)
  • 7.1654 in (8)
  • 7.2835 in (5)
  • 7.4803 in (3)
  • 7.5 in (5)
  • 7.6772 in (3)
  • 7.7165 in (7)
  • 7.874 in (3)
  • 8.0 in (2)
  • 8.2677 in (7)
  • 8.8189 in (8)
  • 8.8583 in (2)
  • 10.0 in (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 2.0919 in (2)
  • 2.126 in (2)
  • 2.2169 in (2)
  • 2.3228 in (5)
  • 2.3419 in (2)
  • 2.4669 in (2)
  • 2.5919 in (3)
  • 2.6771 in (4)
  • 2.7169 in (2)
  • 2.8419 in (2)
  • 2.9527 in (4)
  • 2.9669 in (3)
  • 3.01 in (2)
  • 3.0919 in (3)
  • 3.13 in (2)
  • 3.2169 in (2)
  • 3.2677 in (3)
  • 3.4252 in (5)
  • 3.4669 in (3)
  • 3.51 in (8)
  • 3.5919 in (2)
  • 3.622 in (5)
  • 3.7169 in (2)
  • 3.8419 in (2)
  • 3.937 in (8)
  • 3.96 in (5)
  • 3.9669 in (2)
  • 4.01 in (2)
  • 4.0919 in (2)
  • 4.13 in (2)
  • 4.29 in (2)
  • 4.2913 in (4)
  • 4.31 in (3)
  • 4.34 in (4)
  • 4.3419 in (2)
  • 4.3701 in (3)
  • 4.38 in (2)
  • 4.4669 in (2)
  • 4.5276 in (5)
  • 4.6063 in (4)
  • 4.61 in (3)
  • 4.7169 in (2)
  • 4.8425 in (2)
  • 4.8819 in (2)
  • 4.92 in (2)
  • 4.9213 in (4)
  • 4.9669 in (3)
  • 5.09 in (5)
  • 5.0919 in (4)
  • 5.1969 in (4)
  • 5.2169 in (3)
  • 5.255 in (2)
  • 5.3149 in (4)
  • 5.34 in (2)
  • 5.3419 in (3)
  • 5.3543 in (2)
  • 5.3937 in (3)
  • 5.7874 in (4)
  • 5.8268 in (8)
  • 5.84 in (2)
  • 5.8419 in (6)
  • 5.85 in (3)
  • 6.0236 in (2)
  • 6.142 in (2)
  • 6.3386 in (5)
  • 6.3419 in (4)
  • 6.36 in (3)
  • 6.4173 in (4)
  • 6.7169 in (4)
  • 6.811 in (4)
  • 6.8419 in (4)
  • 7.0472 in (3)
  • 7.0866 in (4)
  • 7.2835 in (4)
  • 7.7165 in (5)
  • 7.7169 in (4)
  • 7.8346 in (4)
  • 7.8419 in (4)
  • 8.1693 in (5)
  • 8.189 in (3)
  • 8.3419 in (3)
  • 8.3858 in (5)
  • 8.4252 in (3)
  • 8.4669 in (4)
  • 8.594 in (3)
  • 8.6732 in (3)
  • 9.0157 in (4)
  • 9.09 in (3)
  • 9.0919 in (3)
  • 9.1693 in (5)
  • 9.2913 in (3)
  • 9.4094 in (3)
  • 9.59 in (5)
  • 9.6457 in (4)
  • 9.7169 in (3)
  • 10.1575 in (3)
  • 10.3419 in (4)
  • 10.3543 in (4)
  • 11.063 in (3)
  • 12.7953 in (3)
Reach Min to Reach Max
Reach
Reach
  • 53.134 mm (2)
  • 54.0 mm (2)
  • 56.309 mm (2)
  • 59.0 mm (5)
  • 59.484 mm (2)
  • 62.659 mm (2)
  • 65.834 mm (3)
  • 68.0 mm (5)
  • 69.009 mm (2)
  • 72.184 mm (2)
  • 75.0 mm (4)
  • 75.359 mm (3)
  • 76.454 mm (2)
  • 78.534 mm (3)
  • 79.502 mm (2)
  • 81.709 mm (2)
  • 83.0 mm (3)
  • 87.0 mm (5)
  • 88.059 mm (3)
  • 89.154 mm (8)
  • 91.234 mm (2)
  • 92.0 mm (5)
  • 94.409 mm (2)
  • 97.584 mm (2)
  • 100.0 mm (8)
  • 100.584 mm (5)
  • 100.759 mm (2)
  • 101.854 mm (2)
  • 103.934 mm (2)
  • 104.902 mm (2)
  • 108.966 mm (2)
  • 109.0 mm (4)
  • 109.474 mm (3)
  • 110.236 mm (4)
  • 110.284 mm (2)
  • 111.0 mm (3)
  • 111.252 mm (2)
  • 113.459 mm (2)
  • 115.0 mm (5)
  • 117.0 mm (4)
  • 117.094 mm (3)
  • 119.809 mm (2)
  • 123.0 mm (2)
  • 124.0 mm (2)
  • 124.968 mm (2)
  • 125.0 mm (4)
  • 126.159 mm (3)
  • 129.286 mm (5)
  • 129.334 mm (4)
  • 132.0 mm (4)
  • 132.509 mm (3)
  • 133.477 mm (2)
  • 135.0 mm (4)
  • 135.636 mm (2)
  • 135.684 mm (3)
  • 136.0 mm (2)
  • 137.0 mm (3)
  • 147.0 mm (5)
  • 148.0 mm (8)
  • 148.384 mm (6)
  • 148.59 mm (3)
  • 153.0 mm (3)
  • 156.0 mm (3)
  • 161.0 mm (5)
  • 161.084 mm (4)
  • 161.544 mm (3)
  • 163.0 mm (4)
  • 165.0 mm (3)
  • 170.609 mm (4)
  • 173.0 mm (4)
  • 173.784 mm (4)
  • 179.0 mm (3)
  • 180.0 mm (4)
  • 185.0 mm (4)
  • 196.0 mm (5)
  • 196.009 mm (4)
  • 199.0 mm (4)
  • 199.184 mm (4)
  • 207.5 mm (5)
  • 208.0 mm (3)
  • 211.884 mm (3)
  • 213.0 mm (6)
  • 214.0 mm (3)
  • 215.059 mm (4)
  • 218.288 mm (3)
  • 220.3 mm (3)
  • 229.0 mm (4)