Duo-Lock Features

Фрезы с промежуточными диаметрами изготавливаются по запросу.

Восстановление инструмента гарантирует максимальную стойкость и экономическую эффективность.

Ассортимент, включающий инструменты для снятия фасок, черновой, чистовой и профильной обработки, охватывает все виды фрезерования концевыми фрезами. Все операции фрезерования монолитными фрезами.

Две конических посадочных поверхности и контакт по торцу обеспечивают повторяемость 10 мкм (0,0004") в осевом направлении при смене головки . Повторяемость при замене пластин в осевом направлении в пределах 50 мкм (0,002").

Усовершенствованная резьба предотвращает возникновение опасно высоких напряжений, увеличивая передаваемый крутящий момент до >25%.

Третья контактная поверхность обеспечивает высокую жесткость и биение ниже 5 мкм (0,0002").

Ключ Duo-Lock™ позволяет без труда заменить инструмент за считанные секунды.

Выбрать фильтры
Фильтры
    Просмотреть фильтры в
    Метрическая система
    Дюймовая система
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (344)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(202)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(202)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(210)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(220)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(294)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(344)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(253)
    • M Stainless Steel (295)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(295)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(295)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(295)
    • K Cast Iron (200)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(200)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(200)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(200)
    • N Non-Ferrous Materials (78)
      • N1
        Wrought Aluminum (78)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(78)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(78)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (78)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (78)
      • N6
        Carbon, Graphite Composites, CFRP (33)
      • N7
        MMC's (33)
    • S High-Temp Alloys (328)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(328)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(319)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(328)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(319)
    • H Hardened Materials (323)
      • H1
        Hardened Materials 44-48 HRC(323)
      • H2
        Hardened Materials 48-55 HRC(266)
      • H3
        Hardened Materials 56-60 HRC(18)
      • H4
        Hardened Materials >60 HRC(8)
    Выбрать First Choice
    • DE (32)
    • GB (12)
    • IN (1)
    • SG (2)
    • US (17)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (12)
    • Concave Radius MillingConcave Radius Milling (13)
    • Face MillingFace Milling (182)
    • PocketPocket (303)
    • Pocket HelicalPocket Helical (286)
    • Pocket MillingPocket Milling (311)
    • Pocket Plunge MillingPocket Plunge Milling (86)
    • Profile MillingProfile Milling (46)
    • RampingRamping (228)
    • Shoulder Ball NoseShoulder Ball Nose (38)
    • Shoulder MillingShoulder Milling (324)
    • Shoulder RoughingShoulder Roughing (192)
    • Shoulder Square EndShoulder Square End (226)
    • Slot Ball NoseSlot Ball Nose (59)
    • Slot MillingSlot Milling (169)
    • Slot Square EndSlot Square End (141)
    • Trochoidal MillingTrochoidal Milling (10)
    Cutting Diameter
    Cutting Diameter
    • 0.02 in(12)
    • 0.135 in(1)
    • 0.157 in(1)
    • 0.237 in(1)
    • 0.255 in(1)
    • 0.26 in(1)
    • 0.276 in(1)
    • 0.315 in(2)
    • 0.375 in(32)
    • 0.38 in(1)
    • 0.382 in(1)
    • 0.394 in(32)
    • 0.44 in(1)
    • 0.461 in(1)
    • 0.473 in(32)
    • 0.5 in(43)
    • 0.618 in(1)
    • 0.625 in(34)
    • 0.629 in(3)
    • 0.63 in(42)
    • 0.75 in(37)
    • 0.776 in(1)
    • 0.787 in(37)
    • 0.984 in(25)
    • 1.0 in(36)
    • 1.25 in(8)
    • 1.26 in(11)
    Cutting Diameter MinдоCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 0.5 mm(12)
    • 3.426 mm(1)
    • 4.0 mm(1)
    • 6.0 mm(1)
    • 6.476 mm(1)
    • 6.601 mm(1)
    • 7.0 mm(1)
    • 8.0 mm(2)
    • 9.525 mm(32)
    • 9.65 mm(1)
    • 9.701 mm(1)
    • 10.0 mm(32)
    • 11.175 mm(1)
    • 11.701 mm(1)
    • 12.0 mm(32)
    • 12.701 mm(43)
    • 15.701 mm(1)
    • 15.875 mm(34)
    • 15.976 mm(3)
    • 16.0 mm(42)
    • 19.05 mm(37)
    • 19.701 mm(1)
    • 20.0 mm(37)
    • 25.0 mm(25)
    • 25.401 mm(36)
    • 31.75 mm(8)
    • 32.0 mm(11)
    Cutting Diameter MinдоCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 9.525 mm(4)
    • 10.0 mm(4)
    • 12.0 mm(5)
    • 12.701 mm(5)
    • 15.875 mm(2)
    • 16.0 mm(5)
    • 25.401 mm(1)
    Maximum Cutting Diameter MinдоMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.375 in(4)
    • 0.394 in(4)
    • 0.473 in(5)
    • 0.5 in(5)
    • 0.625 in(2)
    • 0.63 in(5)
    • 1.0 in(1)
    Maximum Cutting Diameter MinдоMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 0.5 mm(2)
    • 0.525 mm(2)
    • 0.625 mm(2)
    • 0.675 mm(2)
    • 0.75 mm(1)
    • 0.851 mm(4)
    • 1.0 mm(2)
    • 1.026 mm(1)
    • 1.05 mm(2)
    • 1.276 mm(1)
    • 1.5 mm(1)
    • 1.526 mm(2)
    • 1.901 mm(1)
    • 2.0 mm(4)
    • 2.551 mm(2)
    • 3.0 mm(5)
    • 3.051 mm(2)
    • 3.176 mm(2)
    • 4.0 mm(3)
    • 4.525 mm(1)
    • 7.15 mm(3)
    • 7.5 mm(3)
    • 9.0 mm(3)
    • 9.525 mm(3)
    • 11.9 mm(2)
    • 12.0 mm(3)
    • 14.3 mm(30)
    • 15.0 mm(29)
    • 17.5 mm(1)
    • 18.0 mm(26)
    • 18.55 mm(1)
    • 19.05 mm(37)
    • 23.8 mm(15)
    • 23.826 mm(15)
    • 24.0 mm(41)
    • 28.576 mm(32)
    • 30.0 mm(33)
    • 37.5 mm(25)
    • 38.1 mm(35)
    • 47.625 mm(8)
    • 48.0 mm(11)
    Cutting Length MinдоCutting Length Max
    Cutting Length
    Cutting Length
    • 0.02 in(2)
    • 0.021 in(2)
    • 0.025 in(2)
    • 0.027 in(2)
    • 0.03 in(1)
    • 0.034 in(4)
    • 0.039 in(2)
    • 0.04 in(1)
    • 0.041 in(2)
    • 0.05 in(1)
    • 0.06 in(3)
    • 0.075 in(1)
    • 0.079 in(4)
    • 0.1 in(2)
    • 0.119 in(5)
    • 0.12 in(2)
    • 0.125 in(2)
    • 0.157 in(3)
    • 0.178 in(1)
    • 0.281 in(3)
    • 0.295 in(3)
    • 0.354 in(3)
    • 0.375 in(3)
    • 0.47 in(2)
    • 0.473 in(3)
    • 0.564 in(30)
    • 0.591 in(29)
    • 0.69 in(1)
    • 0.709 in(26)
    • 0.73 in(1)
    • 0.75 in(37)
    • 0.937 in(15)
    • 0.939 in(15)
    • 0.946 in(41)
    • 1.125 in(32)
    • 1.181 in(33)
    • 1.476 in(25)
    • 1.5 in(35)
    • 1.875 in(8)
    • 1.891 in(11)
    Cutting Length MinдоCutting Length Max
    Reach
    Reach
    • 0.656 in(5)
    • 0.69 in(5)
    • 0.828 in(5)
    • 0.843 in(21)
    • 0.846 in(2)
    • 0.847 in(1)
    • 0.852 in(1)
    • 0.876 in(5)
    • 0.886 in(23)
    • 0.89 in(2)
    • 0.894 in(1)
    • 1.063 in(22)
    • 1.071 in(5)
    • 1.093 in(4)
    • 1.102 in(5)
    • 1.127 in(30)
    • 1.131 in(3)
    • 1.133 in(1)
    • 1.137 in(1)
    • 1.314 in(5)
    • 1.379 in(5)
    • 1.403 in(2)
    • 1.407 in(24)
    • 1.415 in(1)
    • 1.417 in(37)
    • 1.421 in(1)
    • 1.427 in(1)
    • 1.689 in(26)
    • 1.752 in(1)
    • 1.772 in(27)
    • 2.224 in(20)
    • 2.253 in(27)
    • 2.265 in(1)
    • 2.803 in(5)
    • 2.823 in(8)
    Reach MinдоReach Max
    Reach
    Reach
    • 16.651 mm(5)
    • 17.5 mm(5)
    • 21.0 mm(5)
    • 21.401 mm(21)
    • 21.5 mm(2)
    • 21.526 mm(1)
    • 21.651 mm(1)
    • 22.25 mm(5)
    • 22.5 mm(23)
    • 22.6 mm(2)
    • 22.701 mm(1)
    • 27.0 mm(22)
    • 27.201 mm(5)
    • 27.75 mm(4)
    • 28.0 mm(5)
    • 28.6 mm(30)
    • 28.701 mm(2)
    • 28.725 mm(1)
    • 28.75 mm(1)
    • 28.85 mm(1)
    • 33.375 mm(5)
    • 35.0 mm(5)
    • 35.6 mm(2)
    • 35.7 mm(24)
    • 35.95 mm(1)
    • 36.0 mm(37)
    • 36.1 mm(1)
    • 36.25 mm(1)
    • 42.901 mm(26)
    • 44.5 mm(1)
    • 45.0 mm(27)
    • 56.5 mm(20)
    • 57.2 mm(27)
    • 57.5 mm(1)
    • 71.2 mm(5)
    • 71.7 mm(8)
    Reach MinдоReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (6)
    • 60.0 (6)
    • 90.0 (386)
    Tool Cutting Edge Angle MinдоTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • DUO-LOCK (398)
    Number of Flutes
    Number of Flutes
    • 11 (6)
    • 15 (4)
    • 19 (7)
    • 2 (8)
    • 3 (68)
    • 4 (128)
    • 5 (71)
    • 6 (96)
    • 9 (10)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.149 in(5)
    • 1.181 in(5)
    • 1.335 in(23)
    • 1.339 in(2)
    • 1.344 in(1)
    • 1.354 in(4)
    • 1.379 in(25)
    • 1.383 in(2)
    • 1.399 in(3)
    • 1.417 in(5)
    • 1.467 in(5)
    • 1.655 in(28)
    • 1.661 in(4)
    • 1.717 in(38)
    • 1.72 in(2)
    • 1.721 in(1)
    • 1.726 in(1)
    • 1.736 in(1)
    • 1.881 in(4)
    • 1.891 in(5)
    • 2.189 in(2)
    • 2.193 in(29)
    • 2.205 in(41)
    • 2.209 in(1)
    • 2.213 in(1)
    • 2.215 in(1)
    • 2.224 in(3)
    • 2.255 in(5)
    • 2.319 in(5)
    • 2.63 in(31)
    • 2.65 in(1)
    • 2.713 in(29)
    • 2.717 in(4)
    • 2.988 in(1)
    • 3.461 in(25)
    • 3.488 in(34)
    • 3.508 in(1)
    • 4.398 in(7)
    • 4.417 in(12)
    • 13.146 in(1)
    Over All Length [L] MinдоOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 29.151 mm(5)
    • 30.0 mm(5)
    • 33.9 mm(23)
    • 34.0 mm(2)
    • 34.15 mm(1)
    • 34.4 mm(4)
    • 35.0 mm(25)
    • 35.1 mm(2)
    • 35.5 mm(3)
    • 36.0 mm(5)
    • 37.25 mm(5)
    • 42.0 mm(28)
    • 42.2 mm(4)
    • 43.6 mm(38)
    • 43.7 mm(2)
    • 43.725 mm(1)
    • 43.85 mm(1)
    • 44.1 mm(1)
    • 47.75 mm(4)
    • 48.0 mm(5)
    • 55.6 mm(2)
    • 55.7 mm(29)
    • 56.0 mm(41)
    • 56.1 mm(1)
    • 56.2 mm(1)
    • 56.25 mm(1)
    • 56.5 mm(3)
    • 57.276 mm(5)
    • 58.901 mm(5)
    • 66.8 mm(31)
    • 67.3 mm(1)
    • 68.9 mm(29)
    • 69.0 mm(4)
    • 75.9 mm(1)
    • 87.9 mm(25)
    • 88.601 mm(34)
    • 89.101 mm(1)
    • 111.7 mm(7)
    • 112.2 mm(12)
    • 333.901 mm(1)
    Over All Length [L] MinдоOver All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • BALL NOSE (38)
    • CHAMFER (57)
    • RADIUS (266)
    • SQUARE END (20)
    • TORUS (17)
    Corner Radius
    Corner Radius
    • 0.0 in(77)
    • 0.014 in(3)
    • 0.015 in(22)
    • 0.016 in(9)
    • 0.02 in(13)
    • 0.024 in(2)
    • 0.025 in(2)
    • 0.03 in(47)
    • 0.031 in(2)
    • 0.039 in(35)
    • 0.047 in(2)
    • 0.049 in(2)
    • 0.06 in(41)
    • 0.063 in(1)
    • 0.079 in(11)
    • 0.09 in(14)
    • 0.098 in(17)
    • 0.119 in(10)
    • 0.12 in(22)
    • 0.157 in(13)
    • 0.187 in(1)
    • 0.188 in(3)
    • 0.197 in(11)
    • 0.237 in(6)
    • 0.25 in(10)
    • 0.313 in(4)
    • 0.315 in(4)
    • 0.375 in(4)
    • 0.394 in(4)
    • 0.492 in(3)
    • 0.5 in(3)
    Corner Radius MinдоCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(77)
    • 0.325 mm(3)
    • 0.375 mm(22)
    • 0.4 mm(9)
    • 0.5 mm(13)
    • 0.601 mm(2)
    • 0.625 mm(2)
    • 0.75 mm(47)
    • 0.8 mm(2)
    • 1.0 mm(35)
    • 1.201 mm(2)
    • 1.25 mm(2)
    • 1.5 mm(13)
    • 1.526 mm(28)
    • 1.6 mm(1)
    • 2.0 mm(11)
    • 2.275 mm(14)
    • 2.5 mm(17)
    • 3.0 mm(10)
    • 3.051 mm(22)
    • 4.0 mm(13)
    • 4.75 mm(1)
    • 4.775 mm(3)
    • 5.0 mm(11)
    • 6.0 mm(6)
    • 6.351 mm(10)
    • 7.95 mm(4)
    • 8.0 mm(4)
    • 9.525 mm(4)
    • 10.0 mm(4)
    • 12.5 mm(3)
    • 12.701 mm(3)
    Corner Radius MinдоCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(347)
    • 0.5 mm(45)
    • 1.901 mm(1)
    • 2.0 mm(1)
    • 2.551 mm(1)
    • 3.0 mm(1)
    • 3.176 mm(1)
    • 4.0 mm(1)
    Corner Chamfer MinдоCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(347)
    • 0.02 in(45)
    • 0.075 in(1)
    • 0.079 in(1)
    • 0.1 in(1)
    • 0.119 in(1)
    • 0.125 in(1)
    • 0.157 in(1)
    Corner Chamfer MinдоCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K600 (53)
    • KC639M (8)
    • KC643M (77)
    • KCPM15 (135)
    • KCSM15 (125)
    Hand Of Tool
    Hand Of Tool
    • R (398)
    Rough Finish
    Rough Finish
    • F (371)
    • R (27)
    frontEnd
    Front End Type
    Front End Type
    • DLK - DUO-LOCK Modular Connect (133)
    Front End Style
    Front End Style
    • DLK01 DUO-LOCK (133)
    Gage Length
    Gage Length
    • 2 in(7)
    • 10 in(5)
    • 3 in(2)
    • 5 in(2)
    • 4 in(1)
    • 1.614 in(2)
    • 1.62 in(2)
    • 1.891 in(1)
    • 1.929 in(2)
    • 1.969 in(5)
    • 2.047 in(1)
    • 2.165 in(2)
    • 2.205 in(1)
    • 2.244 in(2)
    • 2.25 in(10)
    • 2.283 in(2)
    • 2.362 in(4)
    • 2.38 in(1)
    • 2.402 in(1)
    • 2.5 in(5)
    • 2.559 in(4)
    • 2.677 in(1)
    • 2.75 in(1)
    • 2.757 in(1)
    • 2.835 in(1)
    • 2.953 in(1)
    • 3.15 in(3)
    • 3.25 in(2)
    • 3.5 in(2)
    • 3.543 in(2)
    • 3.74 in(1)
    • 3.75 in(2)
    • 3.938 in(1)
    • 4.134 in(3)
    • 4.25 in(2)
    • 4.5 in(2)
    • 4.529 in(2)
    • 4.724 in(2)
    • 5.5 in(1)
    • 5.513 in(1)
    • 6.25 in(3)
    • 6.299 in(3)
    • 7.5 in(5)
    • 7.875 in(5)
    • 9.843 in(6)
    Gage Length
    Gage Length
    • 250 mm(6)
    • 200 mm(5)
    • 254 mm(5)
    • 50 mm(5)
    • 60 mm(4)
    • 65 mm(4)
    • 105 mm(3)
    • 160 mm(3)
    • 80 mm(3)
    • 115 mm(2)
    • 120 mm(2)
    • 127 mm(2)
    • 41 mm(2)
    • 49 mm(2)
    • 55 mm(2)
    • 57 mm(2)
    • 58 mm(2)
    • 90 mm(2)
    • 100 mm(1)
    • 140 mm(1)
    • 48 mm(1)
    • 52 mm(1)
    • 56 mm(1)
    • 61 mm(1)
    • 68 mm(1)
    • 70 mm(1)
    • 72 mm(1)
    • 75 mm(1)
    • 95 mm(1)
    • 41.151 mm(2)
    • 50.801 mm(7)
    • 57.151 mm(10)
    • 60.45 mm(1)
    • 63.5 mm(5)
    • 69.851 mm(1)
    • 76.2 mm(2)
    • 82.551 mm(2)
    • 88.9 mm(2)
    • 95.25 mm(2)
    • 101.601 mm(1)
    • 107.95 mm(2)
    • 114.301 mm(2)
    • 139.701 mm(1)
    • 158.75 mm(3)
    • 190.5 mm(5)
    Center Cutting
    Center Cutting
    backEnd
    Connection Type
    Connection Type
    • DUO-LOCK (333)
    • SHORT TAPER (65)
    System Size
    System Size
    • BT40 (5)
    • CV40 (5)
    • CV50 (4)
    • DV40 (4)
    • DV50 (4)
    • HSK100A (8)
    • HSK63A (11)
    • PSC63 (9)
    Back-End Diameter
    Back-End Diameter
    • 9.125 mm(5)
    • 9.525 mm(33)
    • 9.601 mm(12)
    • 10.0 mm(27)
    • 11.5 mm(3)
    • 12.0 mm(40)
    • 12.201 mm(48)
    • 12.701 mm(6)
    • 15.375 mm(5)
    • 15.5 mm(4)
    • 15.875 mm(24)
    • 16.0 mm(55)
    • 18.55 mm(5)
    • 19.05 mm(25)
    • 19.3 mm(38)
    • 20.0 mm(10)
    • 24.0 mm(4)
    • 24.401 mm(36)
    • 25.0 mm(27)
    • 25.401 mm(40)
    • 30.75 mm(2)
    • 31.0 mm(11)
    • 31.75 mm(12)
    • 32.0 mm(4)
    • 38.1 mm(1)
    • 40.0 mm(2)
    • 44.45 mm(14)
    • 50.0 mm(1)
    • 50.801 mm(1)
    • 63.0 mm(20)
    • 100.0 mm(4)
    Back-End Diameter MinдоBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.359 in(5)
    • 0.375 in(33)
    • 0.378 in(12)
    • 0.394 in(27)
    • 0.453 in(3)
    • 0.473 in(40)
    • 0.48 in(48)
    • 0.5 in(6)
    • 0.605 in(5)
    • 0.61 in(4)
    • 0.625 in(24)
    • 0.63 in(55)
    • 0.73 in(5)
    • 0.75 in(25)
    • 0.76 in(38)
    • 0.787 in(10)
    • 0.946 in(4)
    • 0.961 in(36)
    • 0.984 in(27)
    • 1.0 in(40)
    • 1.211 in(2)
    • 1.22 in(11)
    • 1.25 in(12)
    • 1.26 in(4)
    • 1.5 in(1)
    • 1.575 in(2)
    • 1.75 in(14)
    • 1.969 in(1)
    • 2.0 in(1)
    • 2.48 in(20)
    • 3.938 in(4)
    Back-End Diameter MinдоBack-End Diameter Max
    No filters matching ""
    Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
    Select the destination where you want to move до.
    Новинка Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Номер по каталогу ISO

    Номер по каталогу ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
    Session expired due to inactivity, please login again
    Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
    товар(-ы) успешно добавлен(-ы) в корзину

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Номер по каталогу ISO Сплав  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)