TM41

Выбрать фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (43)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (43)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (43)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (43)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (43)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (43)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (43)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (43)
  • M Stainless Steel (43)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (43)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (43)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (43)
  • K Cast Iron (43)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (43)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (43)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (43)
  • S High-Temp Alloys (29)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (29)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (29)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (29)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (29)
  • H Hardened Materials (29)
    • H1
      Hardened Materials 44-48 HRC (29)
Applications
Applications
  • ID Thread Turning ID Thread Turning (28)
  • OD Thread Turning OD Thread Turning (2)
  • Thread Milling Thread Milling (15)
  • Threading Threading (15)
Cutting Diameter
Cutting Diameter
  • 0.835 in (2)
  • 0.965 in (1)
  • 0.969 in (1)
  • 1.181 in (3)
  • 1.417 in (2)
  • 1.421 in (2)
  • 1.891 in (1)
  • 2.091 in (1)
  • 2.283 in (1)
  • 2.48 in (1)
Cutting Diameter Min до Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 21.201 mm (2)
  • 24.5 mm (1)
  • 24.6 mm (1)
  • 30.0 mm (3)
  • 36.0 mm (2)
  • 36.1 mm (2)
  • 48.0 mm (1)
  • 53.1 mm (1)
  • 58.0 mm (1)
  • 63.0 mm (1)
Cutting Diameter Min до Cutting Diameter Max
Type of Thread
Type of Thread
  • M (29)
  • NPT (2)
  • UN (27)
Reach
Reach
  • 1.689 in (2)
  • 1.693 in (3)
  • 1.772 in (2)
  • 1.969 in (2)
  • 2.0 in (2)
  • 2.559 in (4)
Reach Min до Reach Max
Reach
Reach
  • 42.901 mm (2)
  • 43.0 mm (3)
  • 45.0 mm (2)
  • 50.0 mm (2)
  • 50.801 mm (2)
  • 65.0 mm (4)
Reach Min до Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (15)
Tool Cutting Edge Angle Min до Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (4)
  • Weldon (11)
Number of Flutes
Number of Flutes
  • 1 (2)
  • 2 (2)
  • 3 (3)
  • 4 (2)
  • 5 (4)
  • 6 (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (2)
  • 2.0 (41)
Cutting Edges Per Insert Min до Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.969 in (2)
  • 2.0 in (2)
  • 4.094 in (1)
  • 4.13 in (3)
  • 4.134 in (1)
  • 4.173 in (1)
  • 4.194 in (1)
  • 4.98 in (1)
  • 5.0 in (1)
  • 5.039 in (1)
  • 5.059 in (1)
Over All Length [L] Min до Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 50.0 mm (2)
  • 50.801 mm (2)
  • 104.0 mm (1)
  • 104.9 mm (3)
  • 105.0 mm (1)
  • 106.0 mm (1)
  • 106.5 mm (1)
  • 126.5 mm (1)
  • 127.0 mm (1)
  • 128.0 mm (1)
  • 128.5 mm (1)
Over All Length [L] Min до Over All Length [L] Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC610M (29)
  • KC635M (29)
Hand Of Tool
Hand Of Tool
  • R (15)
Wiper Insert
Wiper Insert
  • N (28)
frontEnd
Cutting Width
Cutting Width
  • 1.401 in (2)
  • 1.417 in (2)
  • 1.5 in (8)
  • 1.516 in (4)
  • 1.536 in (2)
  • 1.555 in (2)
  • 1.571 in (2)
  • 1.575 in (4)
  • 1.594 in (2)
Cutting Width Min до Cutting Width Max
Cutting Width
Cutting Width
  • 35.551 mm (2)
  • 36.0 mm (2)
  • 38.1 mm (8)
  • 38.5 mm (4)
  • 39.0 mm (2)
  • 39.5 mm (2)
  • 39.901 mm (2)
  • 40.0 mm (4)
  • 40.5 mm (2)
Cutting Width Min до Cutting Width Max
Thread TPI
Thread TPI
  • 4.0 (17)
  • 4.5 (17)
  • 5.0 (17)
  • 6.0 (17)
  • 7.0 (17)
  • 8.0 (19)
Thread TPI Min до Thread TPI Max
Thread Pitch
Thread Pitch
  • 3.0 mm (17)
  • 3.5 mm (17)
  • 4.0 mm (17)
  • 4.5 mm (17)
  • 5.0 mm (17)
  • 5.5 mm (17)
  • 6.0 mm (17)
Thread Pitch Min до Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.119 in (17)
  • 0.138 in (17)
  • 0.157 in (17)
  • 0.177 in (17)
  • 0.197 in (17)
  • 0.217 in (17)
  • 0.237 in (17)
Thread Pitch Min до Thread Pitch Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • TM-RECTANGLE THREAD MILL 90 (28)
Cutting Tool Material
Cutting Tool Material
  • H W (28)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (11)
  • SHELL MILL (4)
Back-End Diameter
Back-End Diameter
  • 19.0 mm (1)
  • 22.0 mm (1)
  • 25.0 mm (2)
  • 25.401 mm (3)
  • 27.0 mm (1)
  • 31.8 mm (3)
  • 32.0 mm (4)
Back-End Diameter Min до Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.748 in (1)
  • 0.866 in (1)
  • 0.984 in (2)
  • 1.0 in (3)
  • 1.063 in (1)
  • 1.252 in (3)
  • 1.26 in (4)
Back-End Diameter Min до Back-End Diameter Max
No filters matching ""
Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
product-image
Please adjust the following properties from

Номер по каталогу ISO

Номер по каталогу ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
Session expired due to inactivity, please login again
Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
товар(-ы) успешно добавлен(-ы) в корзину

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Номер по каталогу ISO Сплав    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?