Kombinační nástroje
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (223)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(223)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(223)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(223)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(223)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(223)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(223)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(179)
- M Stainless Steel (115)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(115)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(115)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(112)
- K Cast Iron (224)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(224)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(224)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(224)
- N Non-Ferrous Materials (126)
- N1Wrought Aluminum (126)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(126)
- N3High-Silicon Aluminum Alloys Si >12.2%(126)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (126)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (116)
- N6Carbon, Graphite Composites, CFRP (116)
- N7MMC's (113)
- S High-Temp Alloys (122)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(112)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(112)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(112)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(122)
- H Hardened Materials (45)
- H1Hardened Materials 44-48 HRC(45)
- H2Hardened Materials 48-55 HRC(45)
- H3Hardened Materials 56-60 HRC(45)
- H4Hardened Materials >60 HRC(45)
- C CFRP Materials (28)
- C1CFRP, CFRP / CFRP (18)
- C2CFRP / Aluminium CFRP / Non-Ferrous (18)
- C3CFRP / Titanium CFRP / High Temp (18)
- C4CFRP / Stainless Steel (18)
Vybrat první volbu
- IN (3)
Applications
Applications
Counterboring (1)
Countersinking (73)
Drilling (212)
Inclined Exit Drilling (47)
Stacked Plates Drilling (164)
Cutting Diameter
Cutting Diameter
- 3.175 mm(1)
- 3.4 mm(2)
- 3.5 mm(1)
- 3.6 mm(1)
- 3.8 mm(1)
- 3.9 mm(1)
- 3.9688 mm(1)
- 3.97 mm(1)
- 4.0 mm(4)
- 4.1 mm(3)
- 4.2 mm(1)
- 4.3 mm(1)
- 4.5 mm(1)
- 4.6 mm(3)
- 4.623 mm(2)
- 4.7625 mm(1)
- 4.763 mm(1)
- 4.828 mm(5)
- 5.0 mm(1)
- 5.1 mm(3)
- 5.2 mm(1)
- 5.3 mm(1)
- 5.4 mm(1)
- 5.41 mm(1)
- 5.5 mm(1)
- 5.55 mm(3)
- 5.558 mm(5)
- 5.6 mm(1)
- 5.8 mm(1)
- 6.0 mm(4)
- 6.1 mm(3)
- 6.2 mm(1)
- 6.35 mm(8)
- 6.4 mm(1)
- 6.5 mm(1)
- 6.528 mm(1)
- 6.6 mm(1)
- 6.7 mm(1)
- 6.746 mm(1)
- 6.8 mm(1)
- 6.9 mm(1)
- 7.0 mm(1)
- 7.145 mm(1)
- 7.3 mm(3)
- 7.4 mm(1)
- 7.5 mm(1)
- 7.5406 mm(1)
- 7.8 mm(1)
- 7.9 mm(1)
- 7.9375 mm(1)
- 7.938 mm(5)
- 7.95 mm(1)
- 8.0 mm(5)
- 8.1 mm(5)
- 8.2 mm(1)
- 8.204 mm(1)
- 8.3 mm(1)
- 8.334 mm(1)
- 8.3344 mm(1)
- 8.4 mm(2)
- 8.433 mm(1)
- 8.5 mm(1)
- 8.6 mm(3)
- 8.7 mm(3)
- 8.733 mm(3)
- 8.8 mm(1)
- 9.0 mm(1)
- 9.1 mm(3)
- 9.129 mm(1)
- 9.347 mm(1)
- 9.4 mm(1)
- 9.5 mm(1)
- 9.525 mm(6)
- 9.8 mm(1)
- 9.921 mm(1)
- 10.0 mm(6)
- 10.1 mm(4)
- 10.2 mm(1)
- 10.262 mm(2)
- 10.3 mm(1)
- 10.32 mm(4)
- 10.4 mm(3)
- 10.49 mm(2)
- 10.5 mm(1)
- 10.6 mm(1)
- 10.7156 mm(1)
- 10.8 mm(1)
- 11.0 mm(1)
- 11.1 mm(3)
- 11.112 mm(1)
- 11.113 mm(1)
- 11.125 mm(1)
- 11.2 mm(1)
- 11.5 mm(1)
- 11.508 mm(1)
- 11.7 mm(1)
- 11.8 mm(1)
- 11.9 mm(1)
- 12.0 mm(5)
- 12.1 mm(1)
- 12.2 mm(4)
- 12.304 mm(2)
- 12.5 mm(2)
- 12.7 mm(1)
- 12.8 mm(1)
- 13.0 mm(1)
- 13.096 mm(1)
- 13.1 mm(2)
- 13.2 mm(1)
- 13.5 mm(1)
- 14.0 mm(6)
- 14.1 mm(4)
- 14.2 mm(1)
- 14.288 mm(4)
- 14.3 mm(3)
- 14.4 mm(2)
- 14.5 mm(1)
- 14.8 mm(1)
- 15.0 mm(3)
- 15.1 mm(2)
- 15.2 mm(2)
- 15.38 mm(2)
- 15.479 mm(2)
- 15.5 mm(3)
- 15.6 mm(2)
- 15.8 mm(2)
- 15.875 mm(4)
- 16.0 mm(5)
- 16.027 mm(1)
- 16.1 mm(1)
- 16.3 mm(1)
- 16.4 mm(1)
- 16.5 mm(3)
- 16.6 mm(1)
- 16.67 mm(1)
- 16.7 mm(1)
- 17.0 mm(1)
- 17.475 mm(1)
- 17.5 mm(3)
- 18.0 mm(3)
- 19.05 mm(1)
- 20.65 mm(1)
- 23.825 mm(1)
komu
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 10.0 mm(1)
- 10.6 mm(1)
- 11.2 mm(1)
- 12.3 mm(1)
- 12.9 mm(1)
- 13.3 mm(1)
- 13.4 mm(1)
- 13.7 mm(1)
- 14.2 mm(1)
- 14.7 mm(1)
- 15.6 mm(1)
- 15.8 mm(1)
- 15.9 mm(1)
- 16.6 mm(1)
- 17.6 mm(1)
- 17.8 mm(1)
- 18.2 mm(1)
- 18.6 mm(1)
- 19.0 mm(1)
- 19.3 mm(1)
- 19.4 mm(2)
- 19.5 mm(1)
- 20.3 mm(1)
- 21.0 mm(1)
- 21.1 mm(1)
- 21.5 mm(1)
- 22.0 mm(1)
- 22.2 mm(1)
- 22.5 mm(1)
- 22.6 mm(1)
- 22.9 mm(1)
- 23.2 mm(1)
- 23.4 mm(1)
- 23.5 mm(1)
- 23.9 mm(1)
- 24.2 mm(1)
- 24.6 mm(1)
- 24.9 mm(1)
- 25.0 mm(10)
- 25.3 mm(1)
- 25.4 mm(1)
- 25.5 mm(1)
- 26.2 mm(1)
- 26.5 mm(1)
- 26.6 mm(2)
- 26.8 mm(2)
- 27.0 mm(3)
- 27.2 mm(1)
- 27.4 mm(1)
- 27.5 mm(1)
- 27.7 mm(1)
- 28.0 mm(1)
- 28.3 mm(1)
- 28.4 mm(1)
- 28.5 mm(1)
- 28.8 mm(1)
- 29.1 mm(1)
- 29.5 mm(1)
- 29.6 mm(1)
- 29.9 mm(1)
- 30.0 mm(8)
- 30.7 mm(1)
- 31.0 mm(1)
- 31.2 mm(2)
- 31.4 mm(1)
- 31.5 mm(2)
- 31.7 mm(1)
- 31.9 mm(1)
- 32.2 mm(1)
- 32.4 mm(1)
- 32.7 mm(1)
- 32.9 mm(2)
- 33.1 mm(2)
- 33.8 mm(2)
- 34.3 mm(1)
- 34.5 mm(1)
- 34.8 mm(1)
- 34.9 mm(1)
- 35.0 mm(1)
- 35.56 mm(1)
- 35.6 mm(1)
- 36.0 mm(1)
- 36.3 mm(1)
- 36.7 mm(1)
- 36.9 mm(1)
- 37.6 mm(1)
- 38.5 mm(1)
- 38.6 mm(1)
- 38.7 mm(1)
- 40.2 mm(1)
- 40.7 mm(1)
- 41.5 mm(1)
- 41.7 mm(1)
- 42.0 mm(1)
- 42.2 mm(1)
- 43.1 mm(1)
- 43.5 mm(1)
- 43.6 mm(1)
- 44.5 mm(1)
- 45.0 mm(1)
- 48.0 mm(2)
- 50.0 mm(1)
- 51.0 mm(1)
- 58.0 mm(1)
komu
Reach
Reach
- 18.2 mm(1)
- 18.9 mm(1)
- 19.6 mm(1)
- 20.9 mm(1)
- 21.6 mm(1)
- 22.1 mm(1)
- 22.3 mm(1)
- 22.7 mm(1)
- 23.3 mm(1)
- 23.9 mm(1)
- 25.0 mm(1)
- 25.5 mm(1)
- 25.6 mm(1)
- 26.5 mm(1)
- 27.7 mm(1)
- 28.0 mm(1)
- 28.5 mm(1)
- 29.0 mm(1)
- 29.5 mm(1)
- 30.0 mm(1)
- 30.2 mm(1)
- 30.3 mm(1)
- 30.5 mm(1)
- 31.5 mm(1)
- 32.4 mm(1)
- 32.6 mm(1)
- 33.0 mm(10)
- 33.1 mm(1)
- 33.7 mm(1)
- 34.0 mm(1)
- 34.4 mm(1)
- 34.5 mm(1)
- 34.9 mm(1)
- 35.3 mm(1)
- 35.5 mm(1)
- 35.7 mm(1)
- 36.2 mm(1)
- 36.5 mm(1)
- 37.5 mm(1)
- 37.9 mm(1)
- 38.0 mm(10)
- 38.4 mm(1)
- 38.5 mm(1)
- 39.6 mm(1)
- 40.0 mm(1)
- 40.1 mm(1)
- 40.4 mm(1)
- 40.6 mm(1)
- 40.8 mm(2)
- 41.4 mm(1)
- 41.6 mm(1)
- 41.8 mm(1)
- 42.0 mm(1)
- 42.4 mm(1)
- 42.8 mm(1)
- 42.9 mm(1)
- 43.0 mm(1)
- 43.1 mm(1)
- 43.9 mm(1)
- 44.0 mm(1)
- 44.9 mm(1)
- 45.1 mm(1)
- 45.5 mm(1)
- 46.5 mm(1)
- 46.9 mm(1)
- 47.2 mm(1)
- 47.7 mm(1)
- 48.0 mm(1)
- 48.1 mm(1)
- 48.4 mm(1)
- 48.6 mm(1)
- 49.0 mm(1)
- 49.3 mm(1)
- 49.4 mm(1)
- 49.7 mm(1)
- 50.3 mm(1)
- 50.5 mm(2)
- 50.8 mm(1)
- 51.7 mm(2)
- 52.4 mm(1)
- 52.7 mm(1)
- 53.1 mm(1)
- 53.3 mm(1)
- 53.7 mm(1)
- 54.6 mm(1)
- 54.7 mm(1)
- 55.6 mm(1)
- 56.2 mm(1)
- 56.7 mm(1)
- 57.6 mm(1)
- 59.0 mm(1)
- 59.4 mm(1)
- 59.7 mm(1)
- 61.7 mm(1)
- 63.0 mm(1)
- 64.1 mm(1)
- 64.4 mm(1)
- 65.6 mm(1)
- 66.2 mm(1)
- 66.9 mm(1)
- 68.2 mm(2)
- 69.5 mm(1)
- 72.4 mm(2)
- 76.5 mm(1)
komu
Connection Style
Connection Style
- BF Drill Shank (111)
- HC Drill Sleeve with Pocket (20)
- Straight-Cylindrical (60)
- Whistle Notch 2 (24)
Number of Flutes
Number of Flutes
- 1 (24)
- 2 (191)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (61)
- 1.0 (71)
komu
Over All Length [L]
Over All Length [L]
- 49.5 mm(1)
- 50.0 mm(1)
- 55.0 mm(7)
- 56.5 mm(1)
- 58.0 mm(3)
- 62.0 mm(8)
- 66.0 mm(10)
- 68.0 mm(1)
- 70.5 mm(1)
- 74.0 mm(12)
- 75.0 mm(10)
- 78.0 mm(1)
- 79.0 mm(8)
- 80.0 mm(11)
- 80.5 mm(1)
- 82.0 mm(1)
- 82.5 mm(1)
- 84.0 mm(11)
- 87.5 mm(12)
- 89.0 mm(7)
- 91.0 mm(1)
- 94.0 mm(1)
- 95.0 mm(9)
- 97.3 mm(9)
- 102.0 mm(15)
- 103.12 mm(1)
- 103.124 mm(1)
- 104.5 mm(1)
- 104.902 mm(1)
- 107.0 mm(3)
- 108.0 mm(1)
- 109.474 mm(1)
- 109.5 mm(1)
- 109.538 mm(1)
- 111.0 mm(3)
- 113.0 mm(1)
- 115.0 mm(5)
- 117.0 mm(2)
- 117.4 mm(6)
- 117.6 mm(1)
- 118.0 mm(1)
- 120.5 mm(1)
- 121.0 mm(2)
- 122.0 mm(1)
- 123.0 mm(1)
- 127.1 mm(9)
- 127.4 mm(8)
- 130.6 mm(1)
- 132.5 mm(1)
- 133.0 mm(1)
- 137.0 mm(1)
- 141.0 mm(1)
- 143.0 mm(1)
- 144.0 mm(1)
- 146.05 mm(1)
- 149.352 mm(1)
- 153.924 mm(1)
- 155.7 mm(1)
- 160.27 mm(1)
- 163.576 mm(1)
- 163.58 mm(1)
- 166.37 mm(1)
- 166.624 mm(1)
- 168.275 mm(1)
- 169.99 mm(1)
- 184.15 mm(1)
- 190.5 mm(1)
komu
availability
gsaApproval
gsaApproval
Corner Chamfer
Corner Chamfer
- 0.0 mm(34)
komu
application
Coating
Coating
- TiN (1)
- TiN/TiAlN (78)
- Uncoated (20)
Grade Of Cutting Tool
Grade Of Cutting Tool
- CS5 (91)
- KC7015 (37)
- KC7215 (39)
- KC7315 (92)
- KC7325 (3)
- KC7410 (12)
- KCC05 (10)
- KCC10 (3)
- KCMS15 (3)
- KCP15 (17)
- KCP15A (3)
- KCPM45 (10)
- KCU15 (98)
- KD1425 (5)
- KDC05 (5)
- KDC15 (5)
- KM1 (25)
- KMF (86)
- KN15 (3)
Hand Of Tool
Hand Of Tool
- R (215)
Wiper Insert
Wiper Insert
- N (34)
Drill Type
Drill Type
- 81-01 (117)
- 86-01 (12)
- 86-04 (8)
- 86-09 (78)
Countersunk Angle
Countersunk Angle
- 30.0 (50)
- 41.0 (85)
- 45.0 (99)
- 50.0 (5)
komu
frontEnd
Adapter Front-End
Adapter Front-End
- HYDRAULIC CHUCK (32)
- HYDRAULIC CHUCK-SLIM LINE (10)
Cutting Width
Cutting Width
- 5.8 mm(1)
- 6.1 mm(1)
- 9.8 mm(2)
komu
Front End Type
Front End Type
- ZYL - Cylindrical Adapter (42)
Insert Shape
Insert Shape
- COUNTERBORE/COUNTERSINK MISC (118)
- KENTIP DRILL (17)
- KENTIP FUSION DRILL (3)
Front End Style
Front End Style
- ZYL01 Straight Shank (42)
Gage Length
Gage Length
- 70.0000 mm(2)
- 75.0000 mm(5)
- 77.0000 mm(2)
- 80.0000 mm(2)
- 85.0000 mm(1)
- 90.0000 mm(5)
- 95.0000 mm(2)
- 95.2500 mm(2)
- 100.0000 mm(1)
- 150.0000 mm(7)
- 152.4000 mm(2)
- 170.0000 mm(7)
- 200.0000 mm(4)
Point Angle
Point Angle
- 90.0 (5)
- 120.0 (5)
- 128.0 (10)
- 135.0 (99)
- 140.0 (12)
- 180.0 (6)
komu
Front End Size
Front End Size
- 12.0 mm(41)
- 12.7 mm(1)
komu
insertGeometry
Shape
Shape
- COUNTERBORE/COUNTERSINK MISC (34)
Cutting Tool Material
Cutting Tool Material
- D P (2)
- H W (32)
backEnd
Connection Type
Connection Type
- CYLINDRICAL (215)
System Size
System Size
- BT30 (1)
- BT40 (2)
- BT50 (2)
- CV40 (3)
- CV50 (3)
- DV40 (2)
- DV50 (2)
- HSK100A (3)
- HSK32C (1)
- HSK40A (2)
- HSK40C (1)
- HSK50A (1)
- HSK50C (1)
- HSK63A (3)
- HSK63C (1)
- HSK80A (1)
- KM40TS (1)
- KM4X100 (1)
- KM4X63 (3)
- KM50TS (1)
- KM63TS (2)
- KM63XMZ (1)
- PSC50 (1)
- PSC63 (1)
Back-End Diameter
Back-End Diameter
- 4.0 mm(7)
- 5.0 mm(8)
- 6.0 mm(18)
- 7.0 mm(12)
- 8.0 mm(17)
- 9.0 mm(13)
- 10.0 mm(11)
- 11.0 mm(11)
- 12.0 mm(12)
- 13.0 mm(6)
- 14.0 mm(4)
- 15.0 mm(6)
- 16.0 mm(5)
- 17.0 mm(2)
- 18.0 mm(2)
- 19.05 mm(12)
- 20.0 mm(20)
- 25.4 mm(9)
- 25.7 mm(1)
- 27.7 mm(1)
- 29.7 mm(1)
- 31.6 mm(1)
- 31.75 mm(12)
- 32.0 mm(22)
- 33.6 mm(1)
- 37.6 mm(1)
- 38.1 mm(2)
- 39.6 mm(1)
- 40.0 mm(4)
- 41.6 mm(1)
- 44.45 mm(7)
- 50.0 mm(4)
- 63.0 mm(11)
- 69.85 mm(7)
- 80.0 mm(1)
- 100.0 mm(4)
komu
No filters matching ""
