Systém BF
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (176)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(176)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(176)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(176)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(176)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(176)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(176)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(176)
- M Stainless Steel (68)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(68)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(68)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(65)
- K Cast Iron (177)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(177)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(177)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(177)
- N Non-Ferrous Materials (69)
- N1Wrought Aluminum (69)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(69)
- N3High-Silicon Aluminum Alloys Si >12.2%(69)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (69)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (69)
- N6Carbon, Graphite Composites, CFRP (69)
- N7MMC's (66)
- S High-Temp Alloys (65)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(65)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(65)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(65)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(65)
Applications
Applications
Counterboring (1)
Countersinking (35)
Drilling (157)
Inclined Exit Drilling (47)
Stacked Plates Drilling (144)
Cutting Diameter
Cutting Diameter
- 3.175 mm(1)
- 3.4 mm(2)
- 3.5 mm(1)
- 3.6 mm(1)
- 3.8 mm(1)
- 3.9 mm(1)
- 3.97 mm(1)
- 4.0 mm(1)
- 4.1 mm(3)
- 4.2 mm(1)
- 4.3 mm(1)
- 4.5 mm(1)
- 4.6 mm(3)
- 4.623 mm(2)
- 4.763 mm(1)
- 5.0 mm(1)
- 5.1 mm(3)
- 5.2 mm(1)
- 5.3 mm(1)
- 5.4 mm(1)
- 5.41 mm(1)
- 5.5 mm(1)
- 5.55 mm(3)
- 5.558 mm(1)
- 5.6 mm(1)
- 5.8 mm(1)
- 6.0 mm(1)
- 6.1 mm(3)
- 6.2 mm(1)
- 6.35 mm(2)
- 6.4 mm(1)
- 6.5 mm(1)
- 6.528 mm(1)
- 6.6 mm(1)
- 6.7 mm(1)
- 6.746 mm(1)
- 6.8 mm(1)
- 6.9 mm(1)
- 7.0 mm(1)
- 7.145 mm(1)
- 7.3 mm(3)
- 7.4 mm(1)
- 7.5 mm(1)
- 7.5406 mm(1)
- 7.8 mm(1)
- 7.9 mm(1)
- 7.9375 mm(1)
- 7.938 mm(1)
- 8.0 mm(2)
- 8.1 mm(5)
- 8.2 mm(1)
- 8.204 mm(1)
- 8.3 mm(1)
- 8.334 mm(1)
- 8.3344 mm(1)
- 8.4 mm(2)
- 8.433 mm(1)
- 8.5 mm(1)
- 8.6 mm(3)
- 8.7 mm(3)
- 8.733 mm(3)
- 8.8 mm(1)
- 9.0 mm(1)
- 9.1 mm(3)
- 9.129 mm(1)
- 9.347 mm(1)
- 9.4 mm(1)
- 9.5 mm(1)
- 9.8 mm(1)
- 9.921 mm(1)
- 10.0 mm(3)
- 10.1 mm(4)
- 10.2 mm(1)
- 10.262 mm(2)
- 10.3 mm(1)
- 10.32 mm(4)
- 10.4 mm(3)
- 10.49 mm(2)
- 10.5 mm(1)
- 10.6 mm(1)
- 10.7156 mm(1)
- 10.8 mm(1)
- 11.0 mm(1)
- 11.1 mm(3)
- 11.112 mm(1)
- 11.113 mm(1)
- 11.2 mm(1)
- 11.5 mm(1)
- 11.508 mm(1)
- 11.7 mm(1)
- 11.8 mm(1)
- 11.9 mm(1)
- 12.0 mm(2)
- 12.1 mm(1)
- 12.2 mm(4)
- 12.304 mm(2)
- 12.5 mm(2)
- 12.8 mm(1)
- 13.0 mm(1)
- 13.096 mm(1)
- 13.1 mm(2)
- 13.2 mm(1)
- 13.5 mm(1)
- 14.0 mm(3)
- 14.1 mm(4)
- 14.2 mm(1)
- 14.288 mm(4)
- 14.3 mm(2)
- 14.4 mm(2)
- 14.5 mm(1)
- 14.8 mm(1)
- 15.0 mm(3)
- 15.1 mm(2)
- 15.2 mm(2)
- 15.38 mm(2)
- 15.479 mm(2)
- 15.5 mm(3)
- 15.6 mm(2)
- 15.8 mm(2)
- 15.875 mm(4)
- 16.0 mm(2)
- 16.027 mm(1)
- 16.1 mm(1)
- 16.3 mm(1)
- 16.4 mm(1)
- 16.5 mm(3)
- 16.6 mm(1)
- 16.67 mm(1)
- 16.7 mm(1)
- 17.0 mm(1)
- 17.5 mm(3)
- 18.0 mm(1)
komu
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 10.0 mm(1)
- 10.6 mm(1)
- 11.2 mm(1)
- 12.3 mm(1)
- 12.9 mm(1)
- 13.3 mm(1)
- 13.4 mm(1)
- 13.7 mm(1)
- 14.2 mm(1)
- 14.7 mm(1)
- 15.6 mm(1)
- 15.8 mm(1)
- 15.9 mm(1)
- 16.6 mm(1)
- 17.6 mm(1)
- 17.8 mm(1)
- 18.2 mm(1)
- 18.6 mm(1)
- 19.0 mm(1)
- 19.3 mm(1)
- 19.4 mm(2)
- 19.5 mm(1)
- 20.3 mm(1)
- 21.0 mm(1)
- 21.1 mm(1)
- 21.5 mm(1)
- 22.0 mm(1)
- 22.2 mm(1)
- 22.5 mm(1)
- 22.6 mm(1)
- 22.9 mm(1)
- 23.2 mm(1)
- 23.4 mm(1)
- 23.5 mm(1)
- 23.9 mm(1)
- 24.2 mm(1)
- 24.6 mm(1)
- 24.9 mm(1)
- 25.3 mm(1)
- 25.4 mm(1)
- 25.5 mm(1)
- 26.2 mm(1)
- 26.5 mm(1)
- 26.6 mm(2)
- 26.8 mm(2)
- 27.0 mm(1)
- 27.2 mm(1)
- 27.4 mm(1)
- 27.5 mm(1)
- 27.7 mm(1)
- 28.0 mm(1)
- 28.3 mm(1)
- 28.4 mm(1)
- 28.5 mm(1)
- 28.8 mm(1)
- 29.1 mm(1)
- 29.5 mm(1)
- 29.6 mm(1)
- 29.9 mm(1)
- 30.7 mm(1)
- 31.0 mm(1)
- 31.2 mm(2)
- 31.4 mm(1)
- 31.5 mm(2)
- 31.7 mm(1)
- 31.9 mm(1)
- 32.2 mm(1)
- 32.4 mm(1)
- 32.7 mm(1)
- 32.9 mm(2)
- 33.1 mm(2)
- 33.8 mm(2)
- 34.3 mm(1)
- 34.5 mm(1)
- 34.8 mm(1)
- 34.9 mm(1)
- 35.0 mm(1)
- 35.56 mm(1)
- 35.6 mm(1)
- 36.0 mm(1)
- 36.3 mm(1)
- 36.7 mm(1)
- 36.9 mm(1)
- 37.6 mm(1)
- 38.5 mm(1)
- 38.6 mm(1)
- 38.7 mm(1)
- 40.2 mm(1)
- 40.7 mm(1)
- 41.5 mm(1)
- 41.7 mm(1)
- 42.0 mm(1)
- 42.2 mm(1)
- 43.1 mm(1)
- 43.5 mm(1)
- 43.6 mm(1)
- 44.5 mm(1)
- 45.0 mm(1)
- 48.0 mm(2)
- 50.0 mm(1)
- 51.0 mm(1)
- 58.0 mm(1)
komu
Reach
Reach
- 18.2 mm(1)
- 18.9 mm(1)
- 19.6 mm(1)
- 20.9 mm(1)
- 21.6 mm(1)
- 22.1 mm(1)
- 22.3 mm(1)
- 22.7 mm(1)
- 23.3 mm(1)
- 23.9 mm(1)
- 25.0 mm(1)
- 25.5 mm(1)
- 25.6 mm(1)
- 26.5 mm(1)
- 27.7 mm(1)
- 28.0 mm(1)
- 28.5 mm(1)
- 29.0 mm(1)
- 29.5 mm(1)
- 30.0 mm(1)
- 30.2 mm(1)
- 30.3 mm(1)
- 30.5 mm(1)
- 31.5 mm(1)
- 32.4 mm(1)
- 32.6 mm(1)
- 33.1 mm(1)
- 33.7 mm(1)
- 34.0 mm(1)
- 34.4 mm(1)
- 34.5 mm(1)
- 34.9 mm(1)
- 35.3 mm(1)
- 35.5 mm(1)
- 35.7 mm(1)
- 36.2 mm(1)
- 36.5 mm(1)
- 37.5 mm(1)
- 37.9 mm(1)
- 38.4 mm(1)
- 38.5 mm(1)
- 39.6 mm(1)
- 40.0 mm(1)
- 40.1 mm(1)
- 40.4 mm(1)
- 40.6 mm(1)
- 40.8 mm(2)
- 41.4 mm(1)
- 41.6 mm(1)
- 41.8 mm(1)
- 42.0 mm(1)
- 42.4 mm(1)
- 42.8 mm(1)
- 42.9 mm(1)
- 43.0 mm(1)
- 43.1 mm(1)
- 43.9 mm(1)
- 44.0 mm(1)
- 44.9 mm(1)
- 45.1 mm(1)
- 45.5 mm(1)
- 46.5 mm(1)
- 46.9 mm(1)
- 47.2 mm(1)
- 47.7 mm(1)
- 48.0 mm(1)
- 48.1 mm(1)
- 48.4 mm(1)
- 48.6 mm(1)
- 49.0 mm(1)
- 49.3 mm(1)
- 49.4 mm(1)
- 49.7 mm(1)
- 50.3 mm(1)
- 50.5 mm(2)
- 50.8 mm(1)
- 51.7 mm(2)
- 52.4 mm(1)
- 52.7 mm(1)
- 53.1 mm(1)
- 53.3 mm(1)
- 53.7 mm(1)
- 54.6 mm(1)
- 54.7 mm(1)
- 55.6 mm(1)
- 56.2 mm(1)
- 56.7 mm(1)
- 57.6 mm(1)
- 59.0 mm(1)
- 59.4 mm(1)
- 59.7 mm(1)
- 61.7 mm(1)
- 63.0 mm(1)
- 64.1 mm(1)
- 64.4 mm(1)
- 65.6 mm(1)
- 66.2 mm(1)
- 66.9 mm(1)
- 68.2 mm(2)
- 69.5 mm(1)
- 72.4 mm(2)
- 76.5 mm(1)
komu
Connection Style
Connection Style
- BF Drill Shank (111)
- Straight-Cylindrical (29)
- Whistle Notch 2 (17)
Number of Flutes
Number of Flutes
- 1 (21)
- 2 (136)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (14)
- 1.0 (66)
komu
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 55.0 mm(7)
- 62.0 mm(8)
- 66.0 mm(10)
- 74.0 mm(12)
- 79.0 mm(8)
- 80.0 mm(1)
- 82.0 mm(1)
- 84.0 mm(11)
- 87.5 mm(12)
- 89.0 mm(7)
- 91.0 mm(1)
- 94.0 mm(1)
- 95.0 mm(9)
- 97.3 mm(9)
- 102.0 mm(14)
- 104.5 mm(1)
- 107.0 mm(3)
- 109.5 mm(1)
- 111.0 mm(3)
- 113.0 mm(1)
- 115.0 mm(5)
- 117.0 mm(2)
- 117.4 mm(6)
- 118.0 mm(1)
- 120.5 mm(1)
- 121.0 mm(2)
- 123.0 mm(1)
- 127.1 mm(9)
- 127.4 mm(8)
- 130.6 mm(1)
- 132.5 mm(1)
komu
Corner Chamfer
Corner Chamfer
- 0.0 mm(20)
komu
application
Coating
Coating
- TiN (1)
- TiN/TiAlN (78)
Grade Of Cutting Tool
Grade Of Cutting Tool
- CS5 (54)
- KC7315 (55)
- KC7410 (9)
- KCP15 (14)
- KCPM45 (8)
- KCU15 (98)
- KM1 (25)
- KMF (49)
Hand Of Tool
Hand Of Tool
- R (157)
Wiper Insert
Wiper Insert
- N (20)
Drill Type
Drill Type
- 81-01 (97)
- 86-01 (12)
- 86-09 (48)
Countersunk Angle
Countersunk Angle
- 30.0 (50)
- 41.0 (48)
- 45.0 (54)
komu
frontEnd
Cutting Width
Cutting Width
- 5.8 mm(1)
- 6.1 mm(1)
- 9.8 mm(2)
komu
Insert Shape
Insert Shape
- COUNTERBORE/COUNTERSINK MISC (66)
- KENTIP DRILL (14)
Point Angle
Point Angle
- 135.0 (99)
- 140.0 (12)
- 180.0 (6)
komu
insertGeometry
Shape
Shape
- COUNTERBORE/COUNTERSINK MISC (20)
Cutting Tool Material
Cutting Tool Material
- H W (20)
backEnd
Connection Type
Connection Type
- CYLINDRICAL (157)
Back-End Diameter
Back-End Diameter
- 4.0 mm(7)
- 5.0 mm(8)
- 6.0 mm(10)
- 7.0 mm(12)
- 8.0 mm(9)
- 9.0 mm(13)
- 10.0 mm(7)
- 11.0 mm(11)
- 12.0 mm(9)
- 13.0 mm(6)
- 14.0 mm(4)
- 15.0 mm(6)
- 16.0 mm(5)
- 17.0 mm(2)
- 18.0 mm(2)
- 19.05 mm(5)
- 20.0 mm(16)
- 25.4 mm(5)
- 31.75 mm(3)
- 32.0 mm(17)
komu
No filters matching ""
