Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Zajistěte si tyto akce, než bude pozdě! Nakupujte nyní.

Beyond Evolution Integral Holders

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (320)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(320)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(320)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(320)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(320)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(320)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(320)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(320)
    • M Stainless Steel (320)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(320)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(320)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(320)
    • K Cast Iron (320)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(320)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(320)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(320)
    • N Non-Ferrous Materials (320)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (320)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(320)
      • N6
        Carbon, Graphite Composites, CFRP (320)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (320)
      • N1
        Wrought Aluminum (320)
    • S High-Temp Alloys (320)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(320)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(320)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(320)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(320)
    • H Hardened Materials (296)
      • H2
        Hardened Materials 48-55 HRC(296)
      • H1
        Hardened Materials 44-48 HRC(296)
    Vybrat první volbu
    • BR (8)
    • CN (102)
    • DE (102)
    • GB (48)
    • SG (24)
    • US (173)
    Applications
    Applications
    • Cut-OffCut-Off (312)
    • Deep GroovingDeep Grooving (36)
    • FacingFacing (8)
    • GroovingGrooving (220)
    • Multiple Direction CuttingMultiple Direction Cutting (76)
    • Plunge TurningPlunge Turning (76)
    • ProfilingProfiling (8)
    • TurningTurning (48)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (320)
    • Lightly Interrupted Cut (320)
    • Smooth Cut (320)
    • Varying Depth of Cut (320)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (8)
    • 90.0 (312)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 4.5 in(86)
    • 4.921 in(86)
    • 4.9213 in(1)
    • 4.9214 in(1)
    • 5.9055 in(2)
    • 5.906 in(42)
    • 6.0 in(68)
    • 6.693 in(22)
    • 7.0 in(6)
    • 7.874 in(6)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 114.3 mm(86)
    • 125.0 mm(88)
    • 150.0 mm(44)
    • 152.4 mm(68)
    • 170.0 mm(22)
    • 177.8 mm(6)
    • 200.0 mm(6)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(24)
    • 0.006 in(24)
    • 0.008 in(228)
    • 0.012 in(68)
    • 0.016 in(192)
    • 0.031 in(132)
    • 0.039 in(72)
    • 0.041 in(72)
    • 0.046 in(16)
    • 0.047 in(96)
    • 0.059 in(60)
    • 0.061 in(60)
    • 0.063 in(60)
    • 0.065 in(60)
    • 0.079 in(48)
    • 0.081 in(48)
    • 0.094 in(48)
    • 0.096 in(48)
    • 0.098 in(36)
    • 0.1 in(36)
    • 0.118 in(32)
    • 0.12 in(32)
    • 0.125 in(32)
    • 0.128 in(32)
    • 0.156 in(16)
    • 0.157 in(16)
    • 0.158 in(16)
    • 0.159 in(16)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(24)
    • 0.15 mm(24)
    • 0.2 mm(228)
    • 0.3 mm(68)
    • 0.4 mm(192)
    • 0.8 mm(132)
    • 1.0 mm(72)
    • 1.05 mm(72)
    • 1.175 mm(16)
    • 1.2 mm(96)
    • 1.5 mm(60)
    • 1.55 mm(60)
    • 1.6 mm(60)
    • 1.65 mm(60)
    • 2.0 mm(48)
    • 2.05 mm(48)
    • 2.375 mm(48)
    • 2.45 mm(48)
    • 2.5 mm(36)
    • 2.55 mm(36)
    • 3.0 mm(32)
    • 3.05 mm(32)
    • 3.175 mm(32)
    • 3.25 mm(32)
    • 3.95 mm(16)
    • 4.0 mm(16)
    • 4.025 mm(16)
    • 4.05 mm(16)
    Corner Radius MinkomuCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (296)
    • KCK20B (296)
    • KCM35B (240)
    • KCP10B (296)
    • KCP25B (296)
    • KCP25C (296)
    • KCS10B (216)
    • KCU10 (296)
    • KCU10B (296)
    • KCU25 (320)
    • KCU25B (320)
    Hand Of Tool
    Hand Of Tool
    • L (160)
    • R (160)
    F Dimension
    F Dimension
    • 9.53 mm(6)
    • 10.0 mm(6)
    • 11.99 mm(2)
    • 12.0 mm(16)
    • 12.02 mm(2)
    • 12.09 mm(2)
    • 12.14 mm(2)
    • 12.7 mm(18)
    • 12.72 mm(2)
    • 12.8 mm(2)
    • 12.85 mm(2)
    • 15.88 mm(8)
    • 15.97 mm(2)
    • 16.0 mm(8)
    • 16.02 mm(4)
    • 16.09 mm(2)
    • 16.14 mm(4)
    • 19.05 mm(8)
    • 19.08 mm(10)
    • 19.13 mm(20)
    • 19.23 mm(4)
    • 20.0 mm(8)
    • 20.06 mm(10)
    • 20.11 mm(20)
    • 20.21 mm(4)
    • 25.06 mm(12)
    • 25.11 mm(24)
    • 25.21 mm(4)
    • 25.34 mm(2)
    • 25.43 mm(12)
    • 25.48 mm(24)
    • 25.58 mm(4)
    • 25.71 mm(2)
    • 26.0 mm(2)
    • 31.0 mm(2)
    • 31.497 mm(3)
    • 31.75 mm(1)
    • 31.83 mm(12)
    • 31.93 mm(4)
    • 32.06 mm(4)
    • 32.08 mm(12)
    • 32.18 mm(4)
    • 32.31 mm(4)
    • 32.41 mm(2)
    • 32.66 mm(2)
    • 38.28 mm(2)
    • 38.41 mm(2)
    • 38.76 mm(2)
    • 40.18 mm(2)
    • 40.31 mm(2)
    • 40.66 mm(2)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.375 in(6)
    • 0.394 in(6)
    • 0.472 in(18)
    • 0.473 in(2)
    • 0.476 in(2)
    • 0.478 in(2)
    • 0.5 in(18)
    • 0.501 in(2)
    • 0.504 in(2)
    • 0.506 in(2)
    • 0.625 in(8)
    • 0.629 in(2)
    • 0.63 in(8)
    • 0.631 in(4)
    • 0.633 in(2)
    • 0.635 in(4)
    • 0.75 in(8)
    • 0.751 in(10)
    • 0.753 in(20)
    • 0.757 in(4)
    • 0.787 in(8)
    • 0.79 in(10)
    • 0.792 in(20)
    • 0.796 in(4)
    • 0.987 in(12)
    • 0.989 in(24)
    • 0.993 in(4)
    • 0.997 in(2)
    • 1.001 in(12)
    • 1.003 in(24)
    • 1.007 in(4)
    • 1.012 in(2)
    • 1.0236 in(2)
    • 1.2205 in(2)
    • 1.24 in(3)
    • 1.25 in(1)
    • 1.253 in(12)
    • 1.257 in(4)
    • 1.262 in(4)
    • 1.263 in(12)
    • 1.267 in(4)
    • 1.272 in(4)
    • 1.276 in(2)
    • 1.286 in(2)
    • 1.507 in(2)
    • 1.512 in(2)
    • 1.526 in(2)
    • 1.582 in(2)
    • 1.587 in(2)
    • 1.601 in(2)
    F Dimension MinkomuF Dimension Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.787 in(28)
    • 1.024 in(8)
    • 1.26 in(40)
    • 1.654 in(24)
    • 2.047 in(20)
    • 2.441 in(29)
    • 2.52 in(11)
    • 3.228 in(4)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 20.0 mm(28)
    • 26.0 mm(8)
    • 32.0 mm(40)
    • 42.0 mm(24)
    • 52.0 mm(20)
    • 62.0 mm(29)
    • 64.0 mm(11)
    • 82.0 mm(4)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (8)
    • E (312)
    Rake Angle Style
    Rake Angle Style
    • POSITIVE-ZERO (40)
    frontEnd
    Clamp Style
    Clamp Style
    • C (54)
    • S (38)
    • Y (228)
    Cutting Width
    Cutting Width
    • 0.055 in(24)
    • 0.0551 in(24)
    • 0.063 in(24)
    • 0.0787 in(72)
    • 0.0788 in(72)
    • 0.079 in(72)
    • 0.083 in(72)
    • 0.084 in(72)
    • 0.094 in(72)
    • 0.099 in(72)
    • 0.118 in(60)
    • 0.1181 in(60)
    • 0.123 in(60)
    • 0.125 in(60)
    • 0.13 in(60)
    • 0.157 in(48)
    • 0.1574 in(48)
    • 0.1575 in(48)
    • 0.158 in(48)
    • 0.161 in(60)
    • 0.162 in(48)
    • 0.187 in(48)
    • 0.1875 in(48)
    • 0.192 in(48)
    • 0.1968 in(36)
    • 0.197 in(36)
    • 0.202 in(36)
    • 0.236 in(32)
    • 0.2362 in(32)
    • 0.241 in(32)
    • 0.25 in(32)
    • 0.255 in(32)
    • 0.276 in(32)
    • 0.281 in(32)
    • 0.2881 in(32)
    • 0.312 in(16)
    • 0.315 in(16)
    • 0.317 in(16)
    • 0.3199 in(16)
    • 0.32 in(16)
    • 0.375 in(8)
    • 0.38 in(8)
    • 0.394 in(8)
    • 0.399 in(8)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 1.4 mm(24)
    • 1.404 mm(24)
    • 1.6 mm(24)
    • 2.0 mm(72)
    • 2.12 mm(72)
    • 2.125 mm(72)
    • 2.387 mm(72)
    • 2.388 mm(72)
    • 2.51 mm(72)
    • 2.511 mm(72)
    • 3.0 mm(60)
    • 3.125 mm(60)
    • 3.175 mm(60)
    • 3.177 mm(60)
    • 3.3 mm(60)
    • 3.301 mm(60)
    • 3.302 mm(60)
    • 4.0 mm(48)
    • 4.094 mm(60)
    • 4.125 mm(48)
    • 4.75 mm(48)
    • 4.76 mm(48)
    • 4.762 mm(48)
    • 4.763 mm(48)
    • 4.873 mm(48)
    • 4.877 mm(48)
    • 4.878 mm(48)
    • 5.0 mm(36)
    • 5.125 mm(36)
    • 6.0 mm(32)
    • 6.125 mm(32)
    • 6.346 mm(32)
    • 6.35 mm(32)
    • 6.473 mm(32)
    • 6.477 mm(32)
    • 6.478 mm(32)
    • 7.0 mm(32)
    • 7.125 mm(32)
    • 7.317 mm(32)
    • 7.92 mm(16)
    • 7.925 mm(16)
    • 8.0 mm(16)
    • 8.051 mm(16)
    • 8.052 mm(16)
    • 8.125 mm(16)
    • 9.525 mm(8)
    • 9.651 mm(8)
    • 10.0 mm(8)
    • 10.125 mm(8)
    Cutting Width MinkomuCutting Width Max
    Insert Size
    Insert Size
    • 10 (8)
    • 2 (48)
    • 3 (40)
    • 4 (48)
    • 5 (36)
    • 6 (32)
    • 8 (16)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.394 in(28)
    • 0.512 in(8)
    • 0.63 in(136)
    • 0.866 in(24)
    • 1.024 in(68)
    • 1.26 in(32)
    • 1.575 in(16)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 10.0 mm(28)
    • 13.0 mm(8)
    • 16.0 mm(136)
    • 22.0 mm(24)
    • 26.0 mm(68)
    • 32.0 mm(32)
    • 40.0 mm(16)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B L (288)
    • H W (320)
    backEnd
    Shank Height
    Shank Height
    • 0.375 in(6)
    • 0.394 in(6)
    • 0.472 in(24)
    • 0.5 in(24)
    • 0.625 in(14)
    • 0.63 in(14)
    • 0.75 in(42)
    • 0.787 in(42)
    • 0.7874 in(2)
    • 0.984 in(40)
    • 0.9843 in(4)
    • 1.0 in(46)
    • 1.25 in(22)
    • 1.2598 in(18)
    • 1.26 in(4)
    • 1.5 in(6)
    • 1.5748 in(6)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 9.53 mm(6)
    • 10.0 mm(6)
    • 12.0 mm(24)
    • 12.71 mm(24)
    • 15.88 mm(14)
    • 16.0 mm(14)
    • 19.05 mm(42)
    • 20.0 mm(44)
    • 25.0 mm(44)
    • 25.4 mm(46)
    • 31.75 mm(22)
    • 32.0 mm(22)
    • 38.1 mm(6)
    • 40.0 mm(6)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.375 in(6)
    • 0.394 in(6)
    • 0.472 in(24)
    • 0.5 in(24)
    • 0.625 in(14)
    • 0.63 in(14)
    • 0.75 in(42)
    • 0.787 in(42)
    • 0.7874 in(2)
    • 0.984 in(40)
    • 0.9843 in(4)
    • 1.0 in(46)
    • 1.25 in(22)
    • 1.2598 in(18)
    • 1.26 in(4)
    • 1.5 in(6)
    • 1.5748 in(6)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 9.525 mm(3)
    • 9.53 mm(3)
    • 10.0 mm(6)
    • 12.0 mm(24)
    • 12.71 mm(24)
    • 15.875 mm(3)
    • 15.88 mm(11)
    • 16.0 mm(14)
    • 19.05 mm(42)
    • 20.0 mm(44)
    • 25.0 mm(44)
    • 25.4 mm(46)
    • 31.75 mm(22)
    • 32.0 mm(22)
    • 38.1 mm(6)
    • 40.0 mm(6)
    Shank Width MinkomuShank Width Max
    No filters matching ""
    Integrální držáky Beyond Evolution
    Beyond<sup>™</sup> Evolution<sup>™</sup> • Integrální držáky nástrojů • S vnitřním chlazením
    (74)

    Beyond™ Evolution™ • Integrální držáky nástrojů • S vnitřním chlazením

    Beyond™ Evolution™ • Integral Toolholder • Through Coolant • Inch
    (74)

    Beyond™ Evolution™ • Integral Toolholder • Through Coolant • Inch

    Beyond™ Evolution™ • Integral Toolholder • Reinforced • Through Coolant • Inch
    (44)

    Beyond™ Evolution™ • Integral Toolholder • Reinforced • Through Coolant • Inch

    Beyond<sup>™</sup> Evolution<sup>™</sup> • Integrální držáky nástrojů • <br />Zesílené • S vnitřním chlazením
    (44)

    Beyond™ Evolution™ • Integrální držáky nástrojů •
    Zesílené • S vnitřním chlazením

    Beyond<sup>™</sup> Evolution<sup>™</sup> • Integrální držáky nástrojů • <br />Zesílené • Čelní upínka • S vnitřním chlazením
    (38)

    Beyond™ Evolution™ • Integrální držáky nástrojů •
    Zesílené • Čelní upínka • S vnitřním chlazením

    Beyond™ Evolution™ • Integral Toolholder • Reinforced • Front Clamp • Through Coolant • Inch
    (38)

    Beyond™ Evolution™ • Integral Toolholder • Reinforced • Front Clamp • Through Coolant • Inch

    Beyond™ Evolution™ • Integral Toolholder • 45° • Profiling • Through Coolant • Inch
    (4)

    Beyond™ Evolution™ • Integral Toolholder • 45° • Profiling • Through Coolant • Inch

    Beyond<sup>™</sup> Evolution<sup>™</sup> • Integrální držáky nástrojů • 45° • Kopírování • <br />S vnitřním chlazením
    (4)

    Beyond™ Evolution™ • Integrální držáky nástrojů • 45° • Kopírování •
    S vnitřním chlazením

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk