+0
Trochoidal Milling
Ramping: 5°
Side Milling/Shoulder Milling: Square End
Tool Dimensions: Flute Configuration: 5
Shank - Cylindrical Plain
Helix Angle: 40°
Corner Style: Corner RadiusDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 6764473 |
| ISO katalogové ID | KOR5RA0625L313HAR030 |
| ANSI katalogové ID | KOR5RA0625L313HAR030 |
| Grade | KC643M |
| Adapter Style Machine Side | Straight-Cylindrical |
| [D1] Effective Cutting Diameter | 15.875 mm |
| [D1] Effective Cutting Diameter | 0.625 in |
| [D] Adapter / Shank / Bore Diameter | 15.875 mm |
| [D] Adapter / Shank / Bore Diameter | 0.625 in |
| [AP1MAX] 1st Maximum Cutting Depth | 79.375 mm |
| [AP1MAX] 1st Maximum Cutting Depth | 3.125 in |
| [L] Overall Length | 152.4 mm |
| [L] Overall Length | 6 in |
| [Re] Corner Radius | 0.75 mm |
| [Re] Corner Radius | 0.03 in |
| [Z] Number of Flutes | 5 |
Trochoidal MillingRamping: 5°Side Milling/Shoulder Milling: Square EndTool Dimensions: Flute Configuration: 5Shank - Cylindrical PlainHelix Angle: 40°Corner Style: Corner RadiusKarbidy
KC643M
Coated fine-grain grade with PVD multilayer (AlTiN). KC643M™ is a very thin and hard PVD coating particularly suited for cutting steel, cast iron, stainless steel (wet), and titanium (wet). This grade can be used for materials with hardness up to 52 HRC.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Materiálová skupina |  |  | |||||||||||
| Boční frézování (A) | Recommended feed per tooth (IPT = inch/th) for side milling (A). | ||||||||||||
| A | KC643M | Průměr D1 | |||||||||||
| Řezná rychlost | frac. | 1/4 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | ||||||
| ap | ae | Min | Max | dec. | .2500 | .3750 | .5000 | .6250 | .7500 | 1.0000 | |||
| P | 0 | 5 x D | 0.05 x D | 500 | – | 1770 | IPT | .0029 | .0044 | .0054 | .0063 | .0070 | .0078 |
| 1 | 5 x D | 0.05 x D | 500 | – | 1770 | IPT | .0029 | .0044 | .0054 | .0063 | .0070 | .0078 | |
| 2 | 5 x D | 0.05 x D | 460 | – | 1680 | IPT | .0029 | .0044 | .0054 | .0063 | .0070 | .0078 | |
| 3 | 5 x D | 0.05 x D | 400 | – | 1420 | IPT | .0024 | .0037 | .0046 | .0055 | .0062 | .0072 | |
| 4 | 5 x D | 0.05 x D | 300 | – | 1330 | IPT | .0022 | .0033 | .0041 | .0048 | .0054 | .0062 | |
| 5 | 5 x D | 0.05 x D | 200 | – | 890 | IPT | .0020 | .0029 | .0037 | .0044 | .0049 | .0058 | |
| 6 | 5 x D | 0.05 x D | 170 | – | 660 | IPT | .0017 | .0024 | .0031 | .0036 | .0040 | .0045 | |
| M | 1 | 5 x D | 0.05 x D | 300 | – | 1020 | IPT | .0024 | .0037 | .0046 | .0055 | .0062 | .0072 |
| 2 | 5 x D | 0.05 x D | 200 | – | 710 | IPT | .0020 | .0029 | .0037 | .0044 | .0049 | .0058 | |
| 3 | 5 x D | 0.05 x D | 200 | – | 620 | IPT | .0017 | .0024 | .0031 | .0036 | .0040 | .0045 | |
| K | 1 | 5 x D | 0.05 x D | 400 | – | 1330 | IPT | .0029 | .0044 | .0054 | .0063 | .0070 | .0078 |
| 2 | 5 x D | 0.05 x D | 370 | – | 1240 | IPT | .0024 | .0037 | .0046 | .0055 | .0062 | .0072 | |
| 3 | 5 x D | 0.05 x D | 370 | – | 1150 | IPT | .0020 | .0029 | .0037 | .0044 | .0049 | .0058 | |
| S | 1 | 5 x D | 0.05 x D | 170 | – | 800 | IPT | .0024 | .0037 | .0046 | .0055 | .0062 | .0072 |
| 2 | 5 x D | 0.05 x D | 80 | – | 710 | IPT | .0020 | .0029 | .0037 | .0044 | .0049 | .0058 | |
| 3 | 5 x D | 0.05 x D | 80 | – | 350 | IPT | .0013 | .0019 | .0025 | .0029 | .0033 | .0039 | |
| 4 | 5 x D | 0.05 x D | 170 | – | 530 | IPT | .0017 | .0027 | .0034 | .0040 | .0045 | .0053 | |
| H | 1 | 5 x D | 0.05 x D | 270 | – | 1240 | IPT | .0022 | .0033 | .0041 | .0048 | .0054 | .0062 |
| 2 | 5 x D | 0.05 x D | 230 | – | 1060 | IPT | .0017 | .0024 | .0031 | .0036 | .0040 | .0045 | |
| Ae/D1 | 0.50% | 1.00% | 1.50% | 2.00% | 4.00% | 5.00% | |
| Speed factor | Kv | 2.00 | 1.97 | 1.93 | 1.38 | 1.03 | 1.00 |
| Feed factor | KFz | 1.27 | 1.18 | 1.14 | 1.09 | 1.05 | 1.00 |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?