Cutters HexaCut™ 45° • Inch
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (3)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(3)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(3)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(3)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3)
- M Stainless Steel (3)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3)
- K Cast Iron (3)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(3)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(3)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(3)
- N Non-Ferrous Materials (3)
- N1Wrought Aluminum (3)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3)
- N3High-Silicon Aluminum Alloys Si >12.2%(3)
- S High-Temp Alloys (3)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3)
- H Hardened Materials (3)
- H1Hardened Materials 44-48 HRC(3)
Cutting Diameter
Cutting Diameter
- 101.6 mm(1)
- 101.601 mm(1)
- 127.0 mm(1)
to
Maximum Cutting Diameter
Maximum Cutting Diameter
- 114.3 mm(2)
- 139.7 mm(1)
to
Reach
Reach
- 50.038 mm(1)
- 50.8 mm(1)
- 60.452 mm(1)
to
Number of Flutes
Number of Flutes
- 14 (1)
- 18 (1)
- 7 (1)
Over All Length [L]
Over All Length [L]
- 50.038 mm(1)
- 50.8 mm(1)
- 60.452 mm(1)
to
Corner Radius
Corner Radius
- 0.0 mm(3)
- 0.8 mm(3)
- 1.2 mm(3)
- 1.6 mm(3)
- 2.0 mm(3)
- 3.0 mm(3)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC524M (3)
- KCK15 (3)
- KCK20B (3)
- KCKP10 (3)
- KCPK30 (3)
- KD200 (3)
- KY3500 (3)
Back-End
Back-End Diameter
Back-End Diameter
- 31.75 mm(2)
- 38.1 mm(1)
to
No filters matching ""
