KOR5™ <sup>DA</sup> • Radiused • 5 Flutes • 3 x D • Internal Coolant • Safe-Lock™ Shank • Inch
Benzer Ürün:
KOR5™ DA • Radiused • 5 Flutes • 3 x D • Internal Coolant • Safe-Lock™ Shank • Inch
KOR5™ DA Solid Carbide End Mill for Dynamic Milling of Aluminum
Ürün Numarası100159657
Tüm fiyatlandırma seçeneklerinizi keşfetmek için satış ekibimizle iletişime geçin
Özellikler ve avantajlar
- Designed for trochoidal milling with low radial engagement and full length of cut.
- With chip splitters for ideal chip evacuation.
- Proprietary flute form reduces vibrations and improves tool life.
- Helix angle tailored to minimize vibration and optimize tool life.
- Front end geometry designed for maximum tool life in helical and ramping operations.
- Safe-Lock for pull out protection.
Trochoidal Milling
Through Coolant - Solid End Mill
Ramping: 4°
Tool Dimensions: Flute Configuration: 5
Helix Angle: 35°
Corner Style: Corner Radius
Corner Style: Square End
Side Milling/Shoulder Milling: Roughing
Side Milling/Shoulder Milling: Finishing
SAFE-LOCK Shank
| Ae/D1 | 2% | 5% | 10% | 20% | 30% | 40% | 50% | 100% |
| Max Ap | Ap1 Max | Ap1 Max | Ap1 Max | Ap1 Max | 2 x D1 | 1 x D1 | .5 x D1 | .25 x D1 |
| Feed Multiplier | 3.60 | 2.30 | 1.70 | 1.25 | 1.09 | 1.02 | 1.00 | .90 |
| Ae/D1 | 2% | 5% | 10% | 20% | 30% | 40% | 50% | 100% |
| Max Ap | Ap1 Max | Ap1 Max | Ap1 Max | Ap1 Max | 2 x D1 | 1 x D1 | 0,5 x D1 | 0,25 x D1 |
| Feed Multiplier | 3,60 | 2,30 | 1,70 | 1,25 | 1,09 | 1,02 | 1,00 | 0,90 |
 |  |  | |||||||||||
| Dik kenar frezeleme (A) ve Kanal frezeleme (B) | K600 | Recommended feed per tooth (IPT = inch/th) | |||||||||||
| D1 | |||||||||||||
| Malzeme grubu | A | B | Kesme hızı | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | ||||
| ap | ae | ap | min | max | dec. | .3750 | .5000 | .6250 | .7500 | 1.0000 | |||
| N | 1 | 0.5 x D1 | 0.5 x D1 | 0.25 x D1 | 640 | – | 6560 | IPT | 0.0030 | 0.0050 | 0.0060 | 0.0080 | 0.0090 |
| 2 | 0.5 x D1 | 0.5 x D1 | 0.25 x D1 | 640 | – | 4920 | IPT | 0.0025 | 0.0045 | 0.0055 | 0.0070 | 0.0085 | |
| Malzeme grubu | | | K600 | Diş başına önerilen ilerleme (fz = mm/Diş) | |||||||||
| A | B | Kesme hızı; | D1 | ||||||||||
| ap | ae | ap | Min. | Maks. | mm | 10,0 | 12,0 | 16,0 | 20,0 | 25,0 | |||
| N | 1 | 0,5 x D1 | 0,5 x D1 | 0,25 x D1 | 200 | – | 2000 | fz | 0,080 | 0,120 | 0,160 | 0,200 | 0,225 |
| 2 | 0,5 x D1 | 0,5 x D1 | 0,25 x D1 | 200 | – | 1500 | fz | 0,070 | 0,110 | 0,140 | 0,180 | 0,213 | |