successfully added to cart
View Cart

Notifications

Mark all as read
Read More

PCD (Çoklu kristalli elmas) takımların uzun takım ömrü, karbür çözümlere kıyasla 10 kata kadar daha yüksek verimlilik sağlar.

 

Yüksek hızda alüminyum işleme için PCD (Çoklu kristalli elmas) takımlar işleme süresini büyük ölçüde kısaltır.

Çok sayıda uygulamayı kapsayan çeşitli tiplerde PCD (Çoklu kristalli elmas) Parmak frezeler, PCD (Çoklu kristalli elmas) Matkaplar ve PCD (Çoklu kristalli elmas) Raybalar, çevrim sürelerini önemli ölçüde kısaltmak ve üretkenliği artırmak için alüminyum işleme stratejileri.

Kaba talaş işleme ve ince talaş işleme işlemleri için ideal olan tüm takımlar en az miktarda yağlama yöntemine uyumlu ve kullanıma hazırdır.

Keskin kesme kenarları ve düşük sürtünmeli kesme sırtı yüzeyleri, yüksek kalitede hassas son işlemeli yüzeylerin elde edilmesini garanti eder.

 

PCD (Çoklu kristalli elmas) takımlama özellikleri

  • Keskin kesme kenarları
  • Düşük sürtünme özellikli kesme sırtı yüzeyi, kesme kenarı ağzı talaş yapışmasını azaltır
  • Son derece mükemmel aşınma dayanımı, uzun takım ömrü
  • Standart PCD (Çoklu kristalli elmas) takım sunumu sayesinde kısa teslim süresi
  • Az miktarda yağlama yöntemine uyumlu

Matkaplar/ Raybalar

Drills

Parmak frezeler

end mills
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • N Non-Ferrous Materials (138)
    • N1
      Wrought Aluminum
      (138)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (138)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (138)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (138)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (44)
    • N6
      Carbon, Graphite Composites, CFRP
      (44)
    • N7
      MMC's
      (44)
Applications
Applications
  • Blind Hole Finishing Blind Hole Finishing (37)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (49)
  • Drilling Drilling (67)
  • Face Milling Face Milling (44)
  • Pocket Pocket (18)
  • Pocket Helical Pocket Helical (18)
  • Pocket Milling Pocket Milling (18)
  • Pocket Plunge Milling Pocket Plunge Milling (18)
  • Ramping Ramping (18)
  • Shoulder Milling Shoulder Milling (44)
  • Shoulder Roughing Shoulder Roughing (44)
  • Shoulder Square End Shoulder Square End (44)
  • Slot Milling Slot Milling (44)
  • Slot Square End Slot Square End (44)
  • Through Hole Finishing Through Hole Finishing (32)
  • Trochoidal Milling Trochoidal Milling (44)
Cutting Diameter
Cutting Diameter
  • 0.2344 in (1)
  • 0.2362 in (5)
  • 0.25 in (5)
  • 0.2559 in (1)
  • 0.2756 in (1)
  • 0.2813 in (1)
  • 0.2953 in (1)
  • 0.3125 in (5)
  • 0.315 in (5)
  • 0.3281 in (1)
  • 0.3346 in (1)
  • 0.3438 in (1)
  • 0.3543 in (1)
  • 0.374 in (1)
  • 0.375 in (5)
  • 0.3906 in (1)
  • 0.3937 in (5)
  • 0.4063 in (1)
  • 0.4134 in (1)
  • 0.4219 in (1)
  • 0.4331 in (1)
  • 0.4375 in (3)
  • 0.4528 in (1)
  • 0.4531 in (1)
  • 0.4724 in (6)
  • 0.4844 in (1)
  • 0.4921 in (1)
  • 0.5 in (6)
  • 0.5118 in (1)
  • 0.5313 in (1)
  • 0.5315 in (1)
  • 0.5512 in (3)
  • 0.5625 in (1)
  • 0.5709 in (1)
  • 0.5781 in (1)
  • 0.5906 in (1)
  • 0.6102 in (1)
  • 0.625 in (6)
  • 0.6299 in (6)
  • 0.6496 in (1)
  • 0.6693 in (1)
  • 0.6719 in (1)
  • 0.689 in (1)
  • 0.7087 in (3)
  • 0.7283 in (1)
  • 0.748 in (1)
  • 0.75 in (6)
  • 0.7677 in (1)
  • 0.7874 in (6)
  • 0.8661 in (1)
  • 0.875 in (1)
  • 0.9843 in (3)
  • 1.0 in (3)
  • 1.1024 in (1)
  • 1.125 in (1)
  • 1.1811 in (1)
  • 1.25 in (3)
  • 1.2598 in (3)
  • 1.4173 in (1)
  • 1.4375 in (1)
  • 1.5 in (2)
  • 1.5625 in (1)
  • 1.5748 in (3)
  • 1.625 in (1)
  • 1.6535 in (1)
  • 1.9685 in (1)
  • 2.0 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 5.9531 mm (1)
  • 6.0 mm (5)
  • 6.35 mm (5)
  • 6.5 mm (1)
  • 7.0 mm (1)
  • 7.1438 mm (1)
  • 7.5 mm (1)
  • 7.9375 mm (5)
  • 8.0 mm (5)
  • 8.3344 mm (1)
  • 8.5 mm (1)
  • 8.7313 mm (1)
  • 9.0 mm (1)
  • 9.5 mm (1)
  • 9.525 mm (5)
  • 9.9219 mm (1)
  • 10.0 mm (5)
  • 10.3188 mm (1)
  • 10.5 mm (1)
  • 10.7156 mm (1)
  • 11.0 mm (1)
  • 11.1125 mm (3)
  • 11.5 mm (1)
  • 11.5094 mm (1)
  • 12.0 mm (6)
  • 12.3031 mm (1)
  • 12.5 mm (1)
  • 12.7 mm (6)
  • 13.0 mm (1)
  • 13.4938 mm (1)
  • 13.5 mm (1)
  • 14.0 mm (3)
  • 14.2875 mm (1)
  • 14.5 mm (1)
  • 14.6844 mm (1)
  • 15.0 mm (1)
  • 15.5 mm (1)
  • 15.875 mm (6)
  • 16.0 mm (6)
  • 16.5 mm (1)
  • 17.0 mm (1)
  • 17.0656 mm (1)
  • 17.5 mm (1)
  • 18.0 mm (3)
  • 18.5 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (6)
  • 19.5 mm (1)
  • 20.0 mm (6)
  • 22.0 mm (1)
  • 22.24 mm (1)
  • 25.0 mm (3)
  • 25.4 mm (3)
  • 28.0 mm (1)
  • 28.575 mm (1)
  • 30.0 mm (1)
  • 31.75 mm (3)
  • 32.0 mm (3)
  • 36.0 mm (1)
  • 36.52 mm (1)
  • 38.1 mm (2)
  • 39.6875 mm (1)
  • 40.0 mm (3)
  • 41.961 mm (1)
  • 42.0 mm (1)
  • 50.0 mm (1)
  • 50.8 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 6.0 mm (1)
  • 6.35 mm (1)
  • 7.938 mm (1)
  • 8.0 mm (1)
  • 9.525 mm (2)
  • 10.0 mm (2)
  • 12.0 mm (1)
  • 12.7 mm (1)
  • 15.0 mm (6)
  • 15.875 mm (7)
  • 16.0 mm (1)
  • 19.05 mm (2)
  • 20.0 mm (2)
  • 24.0 mm (1)
  • 25.0 mm (1)
  • 25.4 mm (3)
  • 28.0 mm (1)
  • 31.75 mm (2)
  • 32.0 mm (2)
  • 38.1 mm (2)
  • 40.0 mm (3)
  • 50.8 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.2362 in (1)
  • 0.25 in (1)
  • 0.3125 in (1)
  • 0.315 in (1)
  • 0.375 in (2)
  • 0.3937 in (2)
  • 0.4724 in (1)
  • 0.5 in (1)
  • 0.5906 in (6)
  • 0.625 in (7)
  • 0.6299 in (1)
  • 0.75 in (2)
  • 0.7874 in (2)
  • 0.9449 in (1)
  • 0.9843 in (1)
  • 1.0 in (3)
  • 1.1024 in (1)
  • 1.25 in (2)
  • 1.2598 in (2)
  • 1.5 in (2)
  • 1.5748 in (3)
  • 2.0 in (1)
Cutting Length Min to Cutting Length Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 34.9 mm (2)
  • 35.0 mm (1)
  • 40.3 mm (2)
  • 43.0 mm (4)
  • 48.7 mm (3)
  • 49.0 mm (4)
  • 53.1 mm (4)
  • 55.6 mm (3)
  • 56.0 mm (4)
  • 60.0 mm (6)
  • 63.0 mm (4)
  • 64.5 mm (2)
  • 71.0 mm (4)
  • 73.0 mm (1)
  • 74.5 mm (1)
  • 77.0 mm (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.374 in (2)
  • 1.378 in (1)
  • 1.5866 in (2)
  • 1.6929 in (4)
  • 1.9173 in (3)
  • 1.9291 in (4)
  • 2.0906 in (4)
  • 2.189 in (3)
  • 2.2047 in (4)
  • 2.3622 in (6)
  • 2.4803 in (4)
  • 2.5394 in (2)
  • 2.7953 in (4)
  • 2.874 in (1)
  • 2.9331 in (1)
  • 3.0315 in (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.748 in (4)
  • 0.9055 in (2)
  • 0.9843 in (2)
  • 1.3386 in (4)
  • 1.378 in (3)
  • 1.4173 in (3)
  • 1.4961 in (3)
  • 1.6142 in (3)
  • 1.6535 in (1)
  • 1.6929 in (4)
  • 1.7126 in (2)
  • 1.7323 in (2)
  • 1.7717 in (6)
  • 1.9882 in (1)
  • 2.0 in (1)
  • 2.0866 in (4)
  • 2.1654 in (4)
  • 2.2047 in (3)
  • 2.2441 in (1)
  • 2.3819 in (3)
  • 2.4016 in (4)
  • 2.4803 in (1)
  • 2.6181 in (4)
  • 2.6772 in (1)
  • 2.7756 in (3)
  • 2.7953 in (1)
  • 2.874 in (1)
  • 3.0118 in (2)
  • 3.0315 in (3)
  • 3.189 in (1)
  • 3.248 in (2)
  • 3.2677 in (4)
  • 3.6417 in (1)
  • 3.6614 in (4)
  • 3.7598 in (1)
  • 3.9764 in (4)
Reach Min to Reach Max
Reach
Reach
  • 19.0 mm (4)
  • 23.0 mm (2)
  • 25.0 mm (2)
  • 34.0 mm (4)
  • 35.0 mm (3)
  • 36.0 mm (3)
  • 38.0 mm (3)
  • 41.0 mm (3)
  • 42.0 mm (1)
  • 43.0 mm (4)
  • 43.5 mm (2)
  • 44.0 mm (2)
  • 45.0 mm (6)
  • 50.5 mm (1)
  • 50.8 mm (1)
  • 53.0 mm (4)
  • 55.0 mm (4)
  • 56.0 mm (3)
  • 57.0 mm (1)
  • 60.5 mm (3)
  • 61.0 mm (4)
  • 63.0 mm (1)
  • 66.5 mm (4)
  • 68.0 mm (1)
  • 70.5 mm (3)
  • 71.0 mm (1)
  • 73.0 mm (1)
  • 76.5 mm (2)
  • 77.0 mm (3)
  • 81.0 mm (1)
  • 82.5 mm (2)
  • 83.0 mm (4)
  • 92.5 mm (1)
  • 93.0 mm (4)
  • 95.5 mm (1)
  • 101.0 mm (4)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (44)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Short Taper Reamer Shank (17)
  • Straight-Cylindrical (121)
Number of Flutes
Number of Flutes
  • 2 (87)
  • 3 (2)
  • 4 (36)
  • 5 (2)
  • 6 (11)
cornerConfiguration
Corner Style
Corner Style
  • RADIUS (44)
Corner Radius
Corner Radius
  • 0.0079 in (6)
  • 0.01 in (6)
  • 0.0118 in (9)
  • 0.015 in (16)
  • 0.0158 in (7)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (6)
  • 0.254 mm (6)
  • 0.3 mm (9)
  • 0.381 mm (16)
  • 0.4 mm (7)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (44)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (44)
Corner Chamfer Min to Corner Chamfer Max
application
Coating
Coating
  • Uncoated (49)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KD1410 (44)
  • KD1415 (94)
Drill Type
Drill Type
  • 81-01 (49)
Helix Hand
Helix Hand
  • N (45)
Lead in Length
Lead in Length
  • 0.2 mm (45)
Lead in Length Min to Lead in Length Max
Lead In Length
Lead In Length
  • 0.0079 in (45)
Lead In Length Min to Lead In Length Max
frontEnd
Point Angle
Point Angle
  • 140.0 (49)
Point Angle Min to Point Angle Max
Neck Diameter
Neck Diameter
  • 0.2087 in (2)
  • 0.2284 in (2)
  • 0.2874 in (4)
  • 0.3386 in (2)
  • 0.3583 in (2)
  • 0.4331 in (3)
  • 0.4606 in (3)
  • 0.5787 in (3)
  • 0.5827 in (3)
  • 0.7165 in (3)
  • 0.752 in (3)
  • 0.9528 in (2)
  • 0.9685 in (2)
  • 1.2165 in (2)
  • 1.2244 in (2)
  • 1.248 in (3)
  • 1.2579 in (3)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 5.3 mm (2)
  • 5.8 mm (2)
  • 7.3 mm (4)
  • 8.6 mm (2)
  • 9.1 mm (2)
  • 11.0 mm (3)
  • 11.7 mm (3)
  • 14.7 mm (3)
  • 14.8 mm (3)
  • 18.2 mm (3)
  • 19.1 mm (3)
  • 24.2 mm (2)
  • 24.6 mm (2)
  • 30.9 mm (2)
  • 31.1 mm (2)
  • 31.7 mm (3)
  • 31.95 mm (3)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (121)
  • SHORT TAPER (17)
Back-End Diameter
Back-End Diameter
  • 6.0 mm (5)
  • 6.35 mm (6)
  • 7.9375 mm (4)
  • 7.938 mm (2)
  • 8.0 mm (8)
  • 9.525 mm (7)
  • 10.0 mm (8)
  • 11.112 mm (2)
  • 11.1125 mm (4)
  • 12.0 mm (9)
  • 12.7 mm (8)
  • 14.0 mm (6)
  • 14.2875 mm (2)
  • 15.875 mm (7)
  • 16.0 mm (9)
  • 17.4625 mm (1)
  • 17.5 mm (4)
  • 18.0 mm (6)
  • 19.05 mm (5)
  • 20.0 mm (10)
  • 25.0 mm (7)
  • 25.4 mm (2)
  • 30.0 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (5)
  • 35.0 mm (4)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.236 in (2)
  • 0.2362 in (3)
  • 0.25 in (6)
  • 0.3125 in (6)
  • 0.315 in (8)
  • 0.375 in (7)
  • 0.3937 in (6)
  • 0.394 in (2)
  • 0.4375 in (6)
  • 0.472 in (2)
  • 0.4724 in (7)
  • 0.5 in (8)
  • 0.551 in (2)
  • 0.5512 in (4)
  • 0.5625 in (2)
  • 0.625 in (7)
  • 0.6299 in (7)
  • 0.63 in (2)
  • 0.6875 in (1)
  • 0.689 in (4)
  • 0.7087 in (4)
  • 0.709 in (2)
  • 0.75 in (5)
  • 0.787 in (3)
  • 0.7874 in (7)
  • 0.984 in (5)
  • 0.9843 in (2)
  • 1.0 in (2)
  • 1.181 in (2)
  • 1.25 in (5)
  • 1.2598 in (5)
  • 1.378 in (4)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Karbür parmak freze uygulaması

KenCut™ AQ PCD parmak freze alüminyumda kaba işleme ve hassas son işleme için uygun.
(6 Products)
  • Face MillingFace Milling
  • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Trochoidal MillingTrochoidal Milling
  • Slotting: Square EndSlotting: Square End
  • Slotting: Square EndSlotting: Square End
  • Helical MillingHelical Milling
  • Plunge MillingPlunge Milling
  • PocketingPocketing
  • Ramping: BlankRamping: Blank
  • DrillingDrilling
  • 100665610100665610
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes
6752777 ALCC2RA0600N010HAR020IM ALCC2RA0600N010HAR020IM KD1410 Straight-Cylindrical 6.0000 .2362 6.0 .2362 10.0000 .3937 57.0000 2.244 36.0 1.417 0.2000 .0079 2
    List price:
    $311.59 /each.
    Your price::
    Qty
    6752778 ALCC2RA0800N015HAR020IM ALCC2RA0800N015HAR020IM KD1410 Straight-Cylindrical 8.0000 .3150 8.0 .315 15.0000 .5906 63.0000 2.480 36.0 1.417 0.2000 .0079 2
      List price:
      $373.90 /each.
      Your price::
      Qty
      6752779 ALCC2RA1000N015HAR020IM ALCC2RA1000N015HAR020IM KD1410 Straight-Cylindrical 10.0000 .3937 10.0 .3937 15.0000 .5906 76.0000 2.992 40.0 1.574 0.2000 .0079 2
        List price:
        $392.59 /each.
        Your price::
        Qty
        6752780 ALCC2RA1200N020HAR030IM ALCC2RA1200N020HAR030IM KD1410 Straight-Cylindrical 12.0000 .4724 12.0 .4724 20.0000 .7874 83.0000 3.267 45.0 1.771 0.3000 .0118 2
          List price:
          $492.30 /each.
          Your price::
          Qty
          6752791 ALCC2RA1600N025HAR030IM ALCC2RA1600N025HAR030IM KD1410 Straight-Cylindrical 16.0000 .6299 16.0 .6299 25.0000 .9843 95.0000 3.740 48.0 1.889 0.3000 .0118 2
            List price:
            $660.55 /each.
            Your price::
            Qty
            6752792 ALCC2RA20600N028HAR030IM ALCC2RA20600N028HAR030IM KD1410 Straight-Cylindrical 20.0000 .7874 20.0 .7874 28.0000 1.102 108.0000 4.252 50.0 1.968 0.3000 .0118 2
              List price:
              $791.42 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Karbür parmak freze uygulaması

              KenCut™ AQ PCD parmak freze alüminyumda kaba işleme ve hassas son işleme için uygun.
              (3 Products)
              • Face MillingFace Milling
              • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
              • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
              • Trochoidal MillingTrochoidal Milling
              • Slotting: Square EndSlotting: Square End
              • Slotting: Square EndSlotting: Square End
              • Helical MillingHelical Milling
              • Plunge MillingPlunge Milling
              • PocketingPocketing
              • Ramping: BlankRamping: Blank
              • DrillingDrilling
              • 100665610100665610
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [Re] Corner Radius [Re] C