Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

Kennametal Hizmetinizde

Ürüne Özel Bir Sorunuz mu Var?

Uzmanlık Alanına göre Global Hizmet Profesyonellerinin tam listesine bakın

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Back to Solution

Editing Solution

Adding Solution

Solution Name: {{SolutionName}}

Delik genişletme takımları

Filtreleri Seçin
Filters
Filtreler
Filtreler
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (88)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (88)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (88)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (88)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (88)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (88)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (88)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (88)
  • M Stainless Steel (88)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (88)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (88)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (88)
  • K Cast Iron (110)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (110)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (110)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (110)
  • N Non-Ferrous Materials (60)
    • N1
      Wrought Aluminum
      (60)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (60)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (60)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (60)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (60)
    • N6
      Carbon, Graphite Composites, CFRP
      (60)
    • N7
      MMC's
      (60)
  • S High-Temp Alloys (87)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (87)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (87)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (87)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (87)
  • H Hardened Materials (51)
    • H1
      Hardened Materials 44-48 HRC
      (51)
    • H2
      Hardened Materials 48-55 HRC
      (51)
    • H3
      Hardened Materials 56-60 HRC
      (51)
    • H4
      Hardened Materials >60 HRC
      (51)
Applications
Applications
  • Counterboring Counterboring (35)
  • Drilling Drilling (35)
Cutting Diameter
Cutting Diameter
  • 0.595 in (1)
  • 0.635 in (1)
  • 0.674 in (1)
  • 0.714 in (2)
  • 0.794 in (2)
  • 0.812 in (1)
  • 0.834 in (2)
  • 0.873 in (2)
  • 0.912 in (2)
  • 0.953 in (2)
  • 0.991 in (2)
  • 1.0 in (1)
  • 1.031 in (1)
  • 1.07 in (1)
  • 1.109 in (1)
  • 1.187 in (1)
  • 1.188 in (1)
  • 1.268 in (1)
  • 1.307 in (1)
  • 1.346 in (1)
  • 1.387 in (1)
  • 1.425 in (1)
  • 1.504 in (1)
  • 1.583 in (1)
  • 1.625 in (1)
  • 1.661 in (1)
  • 1.819 in (1)
  • 2.0 in (1)
Cutting Diameter Min - Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.125 mm (1)
  • 16.125 mm (1)
  • 17.125 mm (1)
  • 18.125 mm (2)
  • 20.175 mm (2)
  • 20.625 mm (1)
  • 21.175 mm (2)
  • 22.175 mm (2)
  • 23.175 mm (2)
  • 24.175 mm (2)
  • 25.175 mm (2)
  • 25.401 mm (1)
  • 26.175 mm (1)
  • 27.175 mm (1)
  • 28.175 mm (1)
  • 30.151 mm (1)
  • 30.175 mm (1)
  • 32.2 mm (1)
  • 33.2 mm (1)
  • 34.2 mm (1)
  • 35.2 mm (1)
  • 36.2 mm (1)
  • 38.2 mm (1)
  • 40.2 mm (1)
  • 41.276 mm (1)
  • 42.2 mm (1)
  • 46.2 mm (1)
  • 50.801 mm (1)
Cutting Diameter Min - Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (10)
  • Stable (59)
  • Unstable (22)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 8.5 mm (2)
  • 11.0 mm (1)
  • 12.701 mm (1)
  • 13.5 mm (3)
  • 15.875 mm (1)
  • 16.0 mm (7)
  • 18.5 mm (1)
  • 19.05 mm (1)
  • 21.0 mm (3)
  • 23.0 mm (2)
  • 23.5 mm (3)
  • 25.401 mm (1)
  • 25.5 mm (3)
  • 27.5 mm (1)
  • 30.0 mm (1)
  • 30.5 mm (1)
  • 31.75 mm (1)
  • 33.5 mm (2)
Maximum Hole Depth [L4] Min - Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.335 in (2)
  • 0.433 in (1)
  • 0.5 in (1)
  • 0.531 in (3)
  • 0.625 in (1)
  • 0.63 in (7)
  • 0.728 in (1)
  • 0.75 in (1)
  • 0.828 in (3)
  • 0.906 in (2)
  • 0.925 in (3)
  • 1.0 in (1)
  • 1.004 in (3)
  • 1.083 in (1)
  • 1.181 in (1)
  • 1.201 in (1)
  • 1.25 in (1)
  • 1.319 in (2)
Maximum Hole Depth [L4] Min - Maximum Hole Depth [L4] Max
Connection Style
Connection Style
  • Weldon (5)
  • Whistle Notch 2 (30)
Number of Flutes
Number of Flutes
  • 2 (12)
  • 3 (23)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (111)
  • 4.0 (15)
Cutting Edges Per Insert Min - Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (3)
  • 0.016 in (34)
  • 0.024 in (4)
  • 0.031 in (15)
  • 0.039 in (6)
  • 0.047 in (6)
  • 0.063 in (5)
  • 0.079 in (3)
Corner Radius Min - Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (3)
  • 0.4 mm (34)
  • 0.601 mm (4)
  • 0.8 mm (15)
  • 1.0 mm (6)
  • 1.201 mm (6)
  • 1.6 mm (5)
  • 2.0 mm (3)
Corner Radius Min - Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (76)
Corner Chamfer Min - Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (76)
Corner Chamfer Min - Corner Chamfer Max
application
Drilling Condition
Drilling Condition
  • Interrupted (45)
  • Stable (94)
  • Unstable (57)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CD4 (35)
  • CM4 (35)
  • CS5 (36)
  • KC7140 (39)
  • KC720 (7)
  • KC7210 (35)
  • KC7215 (67)
  • KC7815 (7)
  • KCPK10 (41)
  • KCU25 (48)
  • KCU40 (49)
  • KM1 (41)
Hand Of Tool
Hand Of Tool
  • R (35)
Wiper Insert
Wiper Insert
  • N (76)
Drill Type
Drill Type
  • 86-04 (35)
insertGeometry
Shape
Shape
  • S-SQUARE 90 (76)
Insert IC Size
Insert IC Size
  • 6.351 mm (13)
  • 7.926 mm (16)
  • 9.525 mm (20)
  • 12.701 mm (18)
  • 15.875 mm (9)
Insert IC Size Min - Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.25 in (13)
  • 0.312 in (16)
  • 0.375 in (20)
  • 0.5 in (18)
  • 0.625 in (9)
Insert IC Size Min - Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.351 mm (13)
  • 7.926 mm (16)
  • 9.525 mm (20)
  • 12.701 mm (27)
Cutting Edge Length Min - Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.25 in (13)
  • 0.312 in (16)
  • 0.375 in (20)
  • 0.5 in (27)
Cutting Edge Length Min - Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 20 (33)
  • 21 (30)
  • 22 (4)
Cutting Tool Material
Cutting Tool Material
  • H W (76)
Tolerance Class
Tolerance Class
  • H (12)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (35)
Back-End Diameter
Back-End Diameter
  • 19.05 mm (2)
  • 20.0 mm (23)
  • 25.401 mm (2)
  • 31.75 mm (1)
  • 32.0 mm (7)
Back-End Diameter Min - Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.75 in (2)
  • 0.787 in (23)
  • 1.0 in (2)
  • 1.25 in (1)
  • 1.26 in (7)
Back-End Diameter Min - Back-End Diameter Max
No filters matching ""
Ürünleri şurada görüntüleyin:
Metrik
İnç

ORİJİNAL ÜRÜN

SPHX-R20 SPHX-R20

CTR Drilling Inserts
(40 Products)
Ürünleri görüntüle
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [GAA] Insert Rake Angle [Clearance Angle Major Clearning Angle Minor
1928669 SPHX060204R20 SPHX060204R20 KC7140 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 12.000 7.000 7.000
    Liste fiyatı:
    $19.70 /her biri
    Fiyatınız::
    1928670 SPHX070304R20 SPHX070304R20 KC7140 7.9370 .3125 2.8500 .1122 3.1800 .1252 0.4000 .0156 12.000 7.000 7.000
      Liste fiyatı:
      $21.10 /her biri
      Fiyatınız::
      1928667 SPHX090304R20 SPHX090304R20 KC7215 9.5250 .3750 3.5000 .1378 3.1800 .1252 0.4000 .0160 12.000 7.000 7.000
        Liste fiyatı:
        $23.34 /her biri
        Fiyatınız::
        1928671 SPHX090304R20 SPHX090304R20 KC7140 9.5250 .3750 3.5000 .1378 3.1800 .1252 0.4000 .0160 12.000 7.000 7.000
          Liste fiyatı:
          $22.66 /her biri
          Fiyatınız::
          1974209 SPHX090310R20 SPHX090310R20 KC7215 9.5250 .3750 3.5000 .1378 3.1800 .1252 1.0000 .0394 12.000 7.000 7.000
            Liste fiyatı:
            $23.34 /her biri
            Fiyatınız::
            1928672 SPHX120404R20 SPHX120404R20 KC7140 12.7000 .5000 4.5000 .1772 4.7600 .1874 0.4000 .0156 12.000 7.000 7.000
              Liste fiyatı:
              $24.33 /her biri
              Fiyatınız::
              Liste fiyatı:
              İndirim: %
              Fiyatınız::
              Değiştirme Bu ürün mevcut değil
              Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir

              ORİJİNAL ÜRÜN

              SPHX-R21 SPHX-R21

              CTR Drilling Inserts
              (31 Products)
              Ürünleri görüntüle
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [GAA] Insert Rake Angle [Clearance Angle Major Clearning Angle Minor
              2245846 SPHX060202R21 SPHX060202R21 KC7215 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.2000 .0080 4.000 7.000 7.000
                Liste fiyatı:
                $20.56 /her biri
                Fiyatınız::
                2245847 SPHX060206R21 SPHX060206R21 KC7215 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.6000 .0236 4.000 7.000 7.000
                  Liste fiyatı:
                  $20.56 /her biri
                  Fiyatınız::
                  2245848 SPHX060208R21 SPHX060208R21 KC7215 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.8000 .0312 4.000 7.000 7.000
                    Liste fiyatı:
                    $20.56 /her biri
                    Fiyatınız::
                    2245849 SPHX070306R21 SPHX070306R21 KC7215 7.9370 .3125 2.8500 .1122 3.1800 .1252 0.6000 .0236 4.000 7.000 7.000
                      Liste fiyatı:
                      $21.57 /her biri
                      Fiyatınız::
                      2245851 SPHX070310R21 SPHX070310R21 KC7215 7.9370 .3125 2.8500 .1122 3.1800 .1252 1.0000 .0394 4.000 7.000 7.000
                        Liste fiyatı:
                        $21.57 /her biri
                        Fiyatınız::
                        1208830 SPHX150504R-21 SPHX150504R-21 KM1 15.8750 .6250 5.5000 .2165 5.9500 .2343 0.4000 .0156 4.000 7.000 7.000
                          Liste fiyatı:
                          $24.51 /her biri
                          Fiyatınız::
                          Liste fiyatı:
                          İndirim: %
                          Fiyatınız::
                          Değiştirme Bu ürün mevcut değil
                          Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir

                          ORİJİNAL ÜRÜN

                          SPHX-R22 SPHX-R22

                          CTR Drilling Inserts
                          (5 Products)
                          Ürünleri görüntüle
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [GAA] Insert Rake Angle [Clearance Angle Major
                          1208764 SPHX060204R-22 SPHX060204R-22 KM1 6.3500 .2500 2.8500 .1122 2.3800 .0937 0.4000 .0156 25.000 7.000
                            Liste fiyatı:
                            $19.57 /her biri
                            Fiyatınız::
                            1192535 SPHX070304R-22 SPHX070304R-22 KM1 7.9370 .3125 2.8500 .1122 3.1800 .1252 0.4000 .0156 25.000 7.000
                              Liste fiyatı:
                              $20.17 /her biri
                              Fiyatınız::
                              1192539 SPHX090304R-22 SPHX090304R-22 KM1 9.5250 .3750 3.5000 .1378 3.1800 .1252 0.4000 .0160 25.000 7.000
                                Liste fiyatı:
                                $20.51 /her biri
                                Fiyatınız::
                                1208789 SPHX120404R-22 SPHX120404R-22 KM1 12.7000 .5000 4.5000 .1772 4.7600 .1874 0.4000 .0156 25.000 7.000
                                  Liste fiyatı:
                                  $23.46 /her biri
                                  Fiyatınız::
                                  1208833 SPHX150504R-22 SPHX150504R-22 KM1 15.8750 .6250 5.5000 .2165 5.9500 .2343 0.4000 .0156 25.000 7.000
                                    Liste fiyatı:
                                    $24.51 /her biri
                                    Fiyatınız::
                                    Liste fiyatı:
                                    İndirim: %
                                    Fiyatınız::
                                    Değiştirme Bu ürün mevcut değil
                                    Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir

                                    ORİJİNAL ÜRÜN

                                    S2S Whistle NotchWN şaft • Metrik S2S Whistle NotchWN şaft • Metrik

                                    CTR™ • Havşa frezesi
                                    (30 Products)
                                    • Counter BoringCounter Boring
                                    • Shank - Cylindrical Whistle Notch™Shank - Cylindrical Whistle Notch™
                                    • Coolant - Through CoolantCoolant - Through Coolant
                                    • Flute Configuration: 2Flute Configuration: 2
                                    • Flute Configuration: 3Flute Configuration: 3
                                    Ürünleri görüntüle
                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Drill Diameter M [D1] Drill Diameter M Drill Diameter Tol. Min Drill Diameter Tol. Min Drill Diameter Tol. Max Drill Diameter Tol. Max [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Pre Machined Hole Diameter [D6] Pre Machined Hole Diameter [D6] [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth Gage Insert Number of Insert Cutting Diameter 1
                                    2204405 CBTF180R2WD20N2M CBTF180R2WD20N2M 18.1350 .7140 -0.120000 -0.004 0.120000 .0047 20.0 .7874 8.4000 .3307 86.0000 3.385 36.0000 1.417 13.5000 .5315 SPHX070304R.. 2
                                      Liste fiyatı:
                                      $293.23 /her biri
                                      Fiyatınız::
                                      2204396 CBTF200R2WD20N2M CBTF200R2WD20N2M 20.1650 .7939 -0.120000 -0.004 0.120000 .0047 20.0 .7874 8.5000 .3346 86.0000 3.385 36.0000 1.417 16.0000 .6299 SPHX070304R.. 2
                                        Liste fiyatı:
                                        $302.20 /her biri
                                        Fiyatınız::
                                        1191074 CBTF200R2WD20N3M CBTF200R2WD20N3M 20.1650 .7940 -0.120000 -0.004 0.120000 .0047 20.0 .7874 8.5000 .3346 86.0000 3.385 36.0000 1.417 16.0000 .6299 SPHX060204R.. 3
                                          Liste fiyatı:
                                          $329.20 /her biri
                                          Fiyatınız::
                                          1191075 CBTF220R2WD20N3M CBTF220R2WD20N3M 22.1650 .8730 -0.120000 -0.004 0.120000 .0047 20.0 .7874 10.5000 .4134 86.0000 3.385 36.0000 1.417 16.0000 .6299 SPHX060204R.. 3
                                            Liste fiyatı:
                                            $345.74 /her biri
                                            Fiyatınız::
                                            1191076 CBTF260R2WD20N2M CBTF260R2WD20N2M 26.1650 1.030 -0.120000 -0.004 0.120000 .0047 20.0 .7874 13.0000 .5118 96.0000 3.779 46.0000 1.811 23.5000 .9252 SPHX090304R.. 2
                                              Liste fiyatı:
                                              $329.13 /her biri
                                              Fiyatınız::
                                              2204404 CBTF380R2WD32N3M CBTF380R2WD32N3M 38.1950 1.503 -0.120000 -0.004 0.120000 .0047 32.0 1.259 22.0000 .8661 121.0000 4.763 61.0000 2.401 30.0000 1.181 SPHX120404R.. 3
                                                Liste fiyatı:
                                                $478.01 /her biri
                                                Fiyatınız::
                                                Liste fiyatı:
                                                İndirim: %
                                                Fiyatınız::
                                                Değiştirme Bu ürün mevcut değil
                                                Yeni Ürün Bu ürün bir distribütör üzerinden temin edilebilir

                                                ORİJİNAL ÜRÜN

                                                S2S Weldon Shank • Inch S2S Weldon Shank • Inch

                                                CTR — Havşa
                                                (5 Products)
                                                • Counter BoringCounter Boring
                                                • Shank - Cylindrical WeldonShank - Cylindrical Weldon
                                                • Flood Coolant: DrillingFlood Coolant: Drilling
                                                • Flute Configuration: 2Flute Configuration: 2
                                                • Flute Configuration: 3Flute Configuration: 3
                                                Ürünleri görüntüle
                                                SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Drill Diameter M [D1] Drill Diameter M Drill Diameter Tol. Min Drill Diameter Tol. Min Drill Diameter Tol. Max Drill Diameter Tol. Max [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Pre Machined Hole Diameter [D6] Pre Machined Hole Diameter [D6] [L] Overall Length [L] Overall Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [LS] Shank Length [LS] Shank Length Gage Insert Number of Insert Cutting Diameter 1
                                                1992509 CBT0813RW075N3 CBT0813RW075N3 20.6370 .8125 -0.150000 -0.006 0.150000 .0060 19.05 .75 13.4870 .5312 88.9100 3.500 12.7000 .5000 52.0 2.047 SPHX060204R.. 3
                                                  Liste fiyatı:
                                                  $282.37 /her biri
                                                  Fiyatınız::
                                                  1992511 CBT1000RW075N2 CBT1000RW075N2 25.4000 1.000 -0.150000 -0.006 0.150000 .0060 19.05 .75 16.6620 .6562 88.9100 3.500 15.8750 .6250 52.0 2.047 SPHX090304R.. 2
                                                    Liste fiyatı:
                                                    $306.49 /her biri
                                                    Fiyatınız::
                                                    1992583 CBT1188RW100N3 CBT1188RW100N3 30.1620 1.187 -0.150000 -0.006 0.150000 .0060 25.4 1.0 19.8370 .7812 101.6100 4.000 19.0500 .7500 58.4 2.299 SPHX090304R.. 3
                                                      Liste fiyatı:
                                                      $344.42 /her biri
                                                      Fiyatınız::