Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

Kennametal Hizmetinizde

Ürüne Özel Bir Sorunuz mu Var?

Uzmanlık Alanına göre Global Hizmet Profesyonellerinin tam listesine bakın

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Back to Solution

Editing Solution

Adding Solution

Solution Name: {{SolutionName}}

Derin delik delme (10xD’ye kadar) • HTS sistemleri

Filtreleri Seçin
Filters
Filtreler
Filtreler
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (269)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (269)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (269)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (269)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (269)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (269)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (269)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (269)
  • M Stainless Steel (264)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (264)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (264)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (264)
  • K Cast Iron (286)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (286)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (286)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (286)
  • N Non-Ferrous Materials (227)
    • N1
      Wrought Aluminum
      (227)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (227)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (227)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (227)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (227)
    • N6
      Carbon, Graphite Composites, CFRP
      (227)
    • N7
      MMC's
      (227)
  • S High-Temp Alloys (254)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (254)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (254)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (254)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (254)
  • H Hardened Materials (109)
    • H1
      Hardened Materials 44-48 HRC
      (109)
    • H2
      Hardened Materials 48-55 HRC
      (109)
    • H3
      Hardened Materials 56-60 HRC
      (109)
    • H4
      Hardened Materials >60 HRC
      (109)
First Choicei Seçin
  • BR (21)
  • CN (69)
  • DE (69)
  • GB (53)
  • IN (29)
  • SG (52)
  • US (69)
Applications
Applications
  • Convex Drilling Convex Drilling (1)
  • Drilling Drilling (61)
Cutting Diameter
Cutting Diameter
  • 0.197 in (1)
  • 0.237 in (1)
  • 0.315 in (7)
  • 0.394 in (7)
  • 0.591 in (3)
  • 0.787 in (3)
  • 0.984 in (3)
  • 1.181 in (3)
  • 1.575 in (1)
  • 1.693 in (1)
  • 1.772 in (1)
  • 1.811 in (1)
  • 1.929 in (1)
  • 1.969 in (1)
  • 2.047 in (1)
  • 2.165 in (1)
  • 2.283 in (1)
  • 2.48 in (2)
  • 2.677 in (1)
  • 2.874 in (1)
  • 3.071 in (2)
  • 3.307 in (1)
  • 3.543 in (1)
  • 3.781 in (2)
  • 4.016 in (1)
  • 4.252 in (1)
  • 4.529 in (1)
  • 4.803 in (1)
  • 5.118 in (1)
  • 5.513 in (1)
  • 5.906 in (1)
  • 6.22 in (1)
  • 6.378 in (1)
  • 7.087 in (1)
  • 7.678 in (1)
  • 8.387 in (1)
  • 9.055 in (1)
  • 10.236 in (1)
Cutting Diameter Min - Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 5.0 mm (1)
  • 6.0 mm (1)
  • 8.0 mm (7)
  • 10.0 mm (7)
  • 15.0 mm (3)
  • 20.0 mm (3)
  • 25.0 mm (3)
  • 30.0 mm (3)
  • 40.0 mm (1)
  • 43.0 mm (1)
  • 45.0 mm (1)
  • 46.0 mm (1)
  • 49.0 mm (1)
  • 50.0 mm (1)
  • 52.0 mm (1)
  • 55.0 mm (1)
  • 58.0 mm (1)
  • 63.0 mm (2)
  • 68.0 mm (1)
  • 73.0 mm (1)
  • 78.0 mm (2)
  • 84.0 mm (1)
  • 90.0 mm (1)
  • 96.0 mm (2)
  • 102.0 mm (1)
  • 108.0 mm (1)
  • 115.0 mm (1)
  • 122.0 mm (1)
  • 130.0 mm (1)
  • 140.0 mm (1)
  • 150.0 mm (1)
  • 158.0 mm (1)
  • 162.0 mm (1)
  • 180.0 mm (1)
  • 195.0 mm (1)
  • 213.0 mm (1)
  • 230.0 mm (1)
  • 260.0 mm (1)
Cutting Diameter Min - Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (86)
  • Stable (160)
  • Unstable (120)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 8.0 mm (2)
  • 9.601 mm (1)
  • 10.0 mm (2)
  • 11.3 mm (1)
  • 430.0 mm (1)
  • 460.0 mm (1)
  • 490.0 mm (1)
  • 500.0 mm (1)
  • 520.0 mm (1)
  • 550.0 mm (2)
  • 580.0 mm (1)
  • 630.0 mm (1)
  • 680.0 mm (2)
  • 750.0 mm (7)
  • 780.0 mm (3)
  • 1000.0 mm (5)
  • 1060.0 mm (3)
  • 1360.0 mm (4)
Maximum Hole Depth [L4] Min - Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.315 in (2)
  • 0.378 in (1)
  • 0.394 in (2)
  • 0.445 in (1)
  • 16.93 in (1)
  • 18.11 in (1)
  • 19.291 in (1)
  • 19.685 in (1)
  • 20.472 in (1)
  • 21.654 in (2)
  • 22.835 in (1)
  • 24.803 in (1)
  • 26.773 in (2)
  • 29.529 in (7)
  • 30.709 in (3)
  • 39.37 in (5)
  • 41.732 in (3)
  • 53.543 in (4)
Maximum Hole Depth [L4] Min - Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.37 in (1)
  • 0.378 in (1)
  • 0.4 in (2)
  • 0.445 in (2)
  • 0.473 in (2)
  • 0.681 in (1)
  • 0.906 in (1)
  • 1.143 in (1)
  • 1.417 in (1)
Reach Min - Reach Max
Reach
Reach
  • 9.4 mm (1)
  • 9.601 mm (1)
  • 10.15 mm (2)
  • 11.3 mm (2)
  • 12.0 mm (2)
  • 17.3 mm (1)
  • 23.0 mm (1)
  • 29.0 mm (1)
  • 36.0 mm (1)
Reach Min - Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • -8888.0 (33)
Tool Cutting Edge Angle Min - Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • HTS (33)
  • HTS Pilot Drill Shank (18)
  • HTS-C Pilot Drill Shank (4)
  • HTS-R Pilot Drill Shank (6)
Number of Flutes
Number of Flutes
  • 2 (61)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (76)
  • 4.0 (113)
Cutting Edges Per Insert Min - Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (7)
  • 0.012 in (5)
  • 0.016 in (132)
  • 0.024 in (8)
  • 0.031 in (127)
  • 0.039 in (52)
  • 0.047 in (72)
  • 0.063 in (45)
  • 0.079 in (22)
Corner Radius Min - Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (7)
  • 0.301 mm (5)
  • 0.4 mm (132)
  • 0.601 mm (8)
  • 0.8 mm (127)
  • 1.0 mm (52)
  • 1.201 mm (72)
  • 1.6 mm (45)
  • 2.0 mm (22)
Corner Radius Min - Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (243)
Corner Chamfer Min - Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (243)
Corner Chamfer Min - Corner Chamfer Max
application
Coating
Coating
  • TiN (16)
  • Uncoated (4)
Drilling Condition
Drilling Condition
  • Interrupted (32)
  • Stable (106)
  • Unstable (66)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • A30 (8)
  • AS3 (12)
  • CD4 (44)
  • CM4 (35)
  • CS5 (73)
  • K6 (10)
  • KC7020 (15)
  • KC7025 (15)
  • KC7140 (107)
  • KC720 (76)
  • KC7210 (35)
  • KC7215 (104)
  • KC7225 (87)
  • KC7315 (6)
  • KC7325 (2)
  • KC7815 (87)
  • KC7820 (77)
  • KC7845 (10)
  • KC7935 (72)
  • KC810 (72)
  • KC990 (72)
  • KCMS35 (95)
  • KCPK10 (112)
  • KCU25 (133)
  • KCU40 (134)
  • KD1425 (81)
  • KM1 (50)
  • KMF (72)
  • KU40D (72)
Hand Of Tool
Hand Of Tool
  • R (61)
Wiper Insert
Wiper Insert
  • N (189)
Drill Type
Drill Type
  • 81-06 (28)
  • 86-01 (33)
frontEnd
Insert Shape
Insert Shape
  • B-PARALLELOGRAM 82 (10)
  • S-SQUARE 90 (233)
  • W-TRIGON 80 (28)
  • X-TRIGON 84 (44)
Gage Length
Gage Length
  • 2.394 in (2)
  • 2.972 in (2)
  • 3.346 in (3)
  • 3.426 in (3)
  • 3.543 in (3)
  • 3.551 in (1)
  • 3.622 in (2)
  • 3.697 in (1)
  • 3.701 in (4)
  • 3.781 in (2)
  • 3.938 in (2)
  • 4.331 in (2)
  • 4.409 in (2)
  • 4.484 in (1)
  • 4.5 in (1)
  • 4.921 in (2)
  • 5.315 in (1)
  • 5.496 in (1)
  • 5.5 in (2)
  • 6.299 in (3)
  • 6.453 in (1)
  • 6.644 in (2)
  • 6.891 in (1)
  • 7.144 in (1)
  • 7.875 in (2)
  • 8.051 in (1)
  • 8.268 in (4)
  • 8.346 in (2)
  • 8.661 in (1)
  • 9.222 in (1)
  • 10.551 in (1)
  • 11.144 in (2)
  • 11.222 in (1)
  • 12.144 in (1)
  • 12.205 in (2)
  • 12.283 in (2)
  • 12.362 in (3)
  • 12.441 in (1)
  • 13.051 in (1)
  • 13.13 in (1)
  • 14.173 in (1)
  • 15.551 in (1)
  • 15.722 in (1)
  • 17.645 in (2)
  • 18.052 in (1)
  • 18.11 in (2)
  • 18.189 in (2)
  • 18.268 in (1)
  • 19.222 in (1)
  • 19.645 in (1)
  • 20.079 in (1)
  • 20.236 in (1)
  • 20.315 in (1)
  • 21.13 in (1)
  • 24.094 in (2)
  • 24.174 in (1)
  • 25.552 in (1)
  • 25.722 in (1)
  • 31.13 in (1)
  • 31.222 in (1)
Gage Length
Gage Length
  • 210 mm (4)
  • 94 mm (4)
  • 160 mm (3)
  • 314 mm (3)
  • 85 mm (3)
  • 87 mm (3)
  • 90 mm (3)
  • 100 mm (2)
  • 110 mm (2)
  • 112 mm (2)
  • 125 mm (2)
  • 200 mm (2)
  • 212 mm (2)
  • 310 mm (2)
  • 312 mm (2)
  • 460 mm (2)
  • 462 mm (2)
  • 612 mm (2)
  • 92 mm (2)
  • 96 mm (2)
  • 135 mm (1)
  • 175 mm (1)
  • 220 mm (1)
  • 268 mm (1)
  • 316 mm (1)
  • 360 mm (1)
  • 395 mm (1)
  • 464 mm (1)
  • 510 mm (1)
  • 514 mm (1)
  • 516 mm (1)
  • 614 mm (1)
  • 649 mm (1)
  • 60.801 mm (2)
  • 75.5 mm (2)
  • 90.2 mm (1)
  • 93.9 mm (1)
  • 113.9 mm (1)
  • 114.301 mm (1)
  • 139.6 mm (1)
  • 139.701 mm (2)
  • 163.9 mm (1)
  • 168.75 mm (2)
  • 181.451 mm (1)
  • 204.5 mm (1)
  • 234.25 mm (1)
  • 283.05 mm (2)
  • 285.05 mm (1)
  • 308.451 mm (1)
  • 331.5 mm (1)
  • 333.5 mm (1)
  • 399.35 mm (1)
  • 448.151 mm (2)
  • 458.5 mm (1)
  • 488.25 mm (1)
  • 498.951 mm (1)
  • 536.7 mm (1)
  • 653.35 mm (1)
  • 790.7 mm (1)
  • 793.051 mm (1)
Point Angle
Point Angle
  • 118.0 (54)
  • 130.0 (2)
Point Angle Min - Point Angle Max
insertGeometry
Shape
Shape
  • S-SQUARE 90 (189)
Insert IC Size
Insert IC Size
  • 5.551 mm (6)
  • 6.351 mm (27)
  • 7.75 mm (1)
  • 7.926 mm (16)
  • 7.95 mm (24)
  • 9.525 mm (44)
  • 12.701 mm (42)
  • 15.726 mm (20)
  • 15.875 mm (9)
Insert IC Size Min - Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.219 in (6)
  • 0.25 in (27)
  • 0.305 in (1)
  • 0.312 in (16)
  • 0.313 in (24)
  • 0.375 in (44)
  • 0.5 in (42)
  • 0.619 in (20)
  • 0.625 in (9)
Insert IC Size Min - Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 5.426 mm (6)
  • 6.2 mm (10)
  • 6.351 mm (17)
  • 7.75 mm (1)
  • 7.801 mm (15)
  • 7.926 mm (25)
  • 9.375 mm (20)
  • 9.525 mm (24)
  • 12.55 mm (14)
  • 12.701 mm (37)
  • 15.726 mm (20)
Cutting Edge Length Min - Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.214 in (6)
  • 0.244 in (10)
  • 0.25 in (17)
  • 0.305 in (1)
  • 0.307 in (15)
  • 0.312 in (25)
  • 0.369 in (20)
  • 0.375 in (24)
  • 0.494 in (14)
  • 0.5 in (37)
  • 0.619 in (20)
Cutting Edge Length Min - Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 20 (33)
  • 21 (30)
  • 22 (4)
  • 31 (12)
  • FP (27)
  • HP (34)
  • MD (37)
  • MDT (3)
Cutting Tool Material
Cutting Tool Material
  • D P (50)
  • H W (243)
Tolerance Class
Tolerance Class
  • G (51)
  • H (12)
  • P (60)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (28)
  • HTS SHANK (33)
System Size
System Size
  • BT50 (4)
  • CV50 (7)
  • DV50 (2)
  • HSK100A (2)
Back-End Diameter
Back-End Diameter
  • 5.0 mm (1)
  • 6.0 mm (1)
  • 8.0 mm (7)
  • 10.0 mm (7)
  • 13.0 mm (9)
  • 15.0 mm (3)
  • 16.0 mm (5)