Read More

FBX Matkap

FBX Matkap, ısıl dirençli alaşımdan üretilen uçak gövdesi yapısal parçalarının ön işlemesi için idealdir.

Takımın dış çapında 4 büyük talaş kanalı ve 4 etkin kesme kenarı, büyük metal plakalar veya dövme parçalarda hızlı talaş kaldırmayı garanti eder.

2 Etkin kesme kenarı ve talaş yarıcılara sahip bir merkezi kesici uç, mükemmel talaş oluşumunu sağlayarak maksimum ilerleme hızlarına olanak sağlar.

Düz tabanlı delik delme uç tasarımı, radyal kuvvetleri ortadan kaldırır. Daha düşük güçte tezgahlarda yapılan uygulamalar için ideal.

Çoklu boyut seçenekleri

95mm boyda FBX Matkap gövdeleri – Çap 60mm, 75mm, 82mm 

150mm boyda FBX Matkap gövdeleri – Çap 60mm, 75mm, 90mm

 

 

FBX Ek özellikler

BTF ek özellikler

 

 

 

 

Uçak gövdesi yapısal parçalarının işlenmesi - İş süreci adımları

Ham Titanyum plaka

Boşlukların açılması

(FBX - Düz tabanlı delik delme için değiştirilebilir kesici uçlu matkap)

Kaba işleme

(HARVI Ultra 8X)

Hassas son işleme

(Karbür parmak frezeler)

FBX Matkap ürünlerine bakınız

Filtreleri Seçin
Filters
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (10)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (10)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (10)
  • M Stainless Steel (10)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (10)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (10)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (10)
  • S High-Temp Alloys (10)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (10)
Applications
Applications
  • Chain Drilling Chain Drilling (6)
  • Convex Drilling Convex Drilling (6)
  • Corner Drilling 45° Corner Drilling 45° (6)
  • Cross Hole Drilling Cross Hole Drilling (6)
  • Drilling Drilling (6)
  • Flat Bottom Drilling Flat Bottom Drilling (6)
  • Half Cylindrical Drilling Half Cylindrical Drilling (6)
  • Inclined Entry Drilling Inclined Entry Drilling (6)
  • Inclined Exit Drilling Inclined Exit Drilling (6)
  • X-Offset Drilling X-Offset Drilling (6)
Cutting Diameter
Cutting Diameter
  • 1.26 in (1)
  • 1.496 in (1)
  • 2.362 in (2)
  • 2.953 in (2)
  • 3.543 in (2)
Cutting Diameter Min - Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 32.0 mm (1)
  • 38.0 mm (1)
  • 60.0 mm (2)
  • 75.0 mm (2)
  • 90.0 mm (2)
Cutting Diameter Min - Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 95.0 mm (3)
  • 150.0 mm (3)
Maximum Hole Depth [L4] Min - Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 3.74 in (3)
  • 5.906 in (3)
Maximum Hole Depth [L4] Min - Maximum Hole Depth [L4] Max
Connection Style
Connection Style
  • BTF (6)
Number of Flutes
Number of Flutes
  • 4 (2)
  • 6 (2)
  • 8 (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (8)
  • 4.0 (8)
Cutting Edges Per Insert Min - Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 6.299 in (3)
  • 8.465 in (3)
Over All Length [L] Min - Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 160.0 mm (3)
  • 215.0 mm (3)
Over All Length [L] Min - Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.031 in (2)
Corner Radius Min - Corner Radius Max
Corner Radius
Corner Radius
  • 0.8 mm (2)
Corner Radius Min - Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (4)
Corner Chamfer Min - Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (4)
Corner Chamfer Min - Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KCSM40 (8)
  • KCU45 (8)
Hand Of Tool
Hand Of Tool
  • R (6)
Wiper Insert
Wiper Insert
  • N (4)
Drill Type
Drill Type
  • 86-01 (6)
frontEnd
Adapter Front-End
Adapter Front-End
  • BOEING TAPER FLANGE (4)
  • SHELL MILL ADAPTER (33)
Front End Type
Front End Type
  • BTF - BTF (4)
  • FDA - Milling Cutter Arbor (33)
Insert Shape
Insert Shape
  • KSEM DRILL (8)
  • S-SQUARE 90 (8)
Front End Style
Front End Style
  • BTF01 Standard BTF (4)
  • FDA22 Transv Drive & SHCS (33)
Gage Length
Gage Length
  • 2.757 in (3)
  • 3.15 in (1)
  • 3.337 in (1)
  • 4.258 in (1)
  • 4.337 in (1)
  • 4.604 in (1)
  • 4.968 in (1)
  • 5.037 in (1)
  • 5.258 in (1)
  • 5.337 in (1)
  • 5.604 in (1)
  • 5.906 in (3)
  • 5.968 in (1)
  • 6.037 in (1)
  • 6.258 in (1)
  • 6.337 in (1)
  • 6.604 in (1)
  • 6.968 in (1)
  • 7.037 in (1)
  • 7.258 in (1)
  • 7.337 in (1)
  • 7.604 in (1)
  • 7.875 in (3)
  • 7.968 in (1)
  • 8.037 in (1)
  • 8.259 in (1)
  • 8.605 in (1)
  • 8.968 in (1)
  • 9.037 in (1)
  • 10.468 in (1)
  • 11.468 in (1)
Gage Length
Gage Length
  • 150 mm (3)
  • 200 mm (3)
  • 70 mm (3)
  • 80 mm (1)
  • 84.75 mm (1)
  • 108.15 mm (1)
  • 110.15 mm (1)
  • 116.95 mm (1)
  • 126.176 mm (1)
  • 127.95 mm (1)
  • 133.55 mm (1)
  • 135.55 mm (1)
  • 142.35 mm (1)
  • 151.576 mm (1)
  • 153.35 mm (1)
  • 158.951 mm (1)
  • 160.951 mm (1)
  • 167.75 mm (1)
  • 176.976 mm (1)
  • 178.75 mm (1)
  • 184.351 mm (1)
  • 186.351 mm (1)
  • 193.15 mm (1)
  • 202.375 mm (1)
  • 204.15 mm (1)
  • 209.75 mm (1)
  • 218.55 mm (1)
  • 227.775 mm (1)
  • 229.55 mm (1)
  • 265.875 mm (1)
  • 291.276 mm (1)
Point Angle
Point Angle
  • 180.0 (2)
Point Angle Min - Point Angle Max
Front End Size
Front End Size
  • 0.75 in (6)
  • 0.866 in (2)
  • 1.0 in (11)
  • 1.063 in (2)
  • 1.25 in (5)
  • 1.26 in (2)
  • 1.5 in (5)
Front End Size Min - Front End Size Max
Front End Size
Front End Size
  • 19.05 mm (6)
  • 22.0 mm (2)
  • 25.401 mm (11)
  • 27.0 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (2)
  • 38.1 mm (5)
Front End Size Min - Front End Size Max
insertGeometry
Shape
Shape
  • KSEM DRILL (2)
  • S-SQUARE 90 (2)
Insert IC Size
Insert IC Size
  • 12.701 mm (2)
Insert IC Size Min - Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.5 in (2)
Insert IC Size Min - Insert IC Size Max
Insert Seat Size
Insert Seat Size
  • 10 (1)
  • 8 (1)
Cutting Edge Length
Cutting Edge Length
  • 12.701 mm (2)
Cutting Edge Length Min - Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.5 in (2)
Cutting Edge Length Min - Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • GB (2)
Cutting Tool Material
Cutting Tool Material
  • H W (4)
Tolerance Class
Tolerance Class
  • E (2)
Cutting Diameter Insert
Cutting Diameter Insert
  • 1.26 in (1)
  • 1.496 in (1)
Cutting Diameter Insert Min - Cutting Diameter Insert Max
Cutting Diameter Insert
Cutting Diameter Insert
  • 32.0 mm (1)
  • 38.0 mm (1)
Cutting Diameter Insert Min - Cutting Diameter Insert Max
backEnd
Connection Type
Connection Type
  • FLANGE ADAPTER (6)
System Size
System Size
  • BT50 (1)
  • BTF46 (39)
  • DV50 (1)
  • HSK100A (1)
  • HSK125A (1)
Back-End Diameter
Back-End Diameter
  • 46.026 mm (31)
  • 69.851 mm (2)
  • 100.0 mm (1)
  • 125.0 mm (1)
Back-End Diameter Min - Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.812 in (31)
  • 2.75 in (2)
  • 3.938 in (1)
  • 4.921 in (1)
Back-End Diameter Min - Back-End Diameter Max
No filters matching ""
öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
product-image
Please adjust the following properties from

ISO Katalog Numarası

ANSI Katalog Numarası

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Pano bilgilerinizi görmek için oturum açmalısınız
Session expired due to inactivity, please login again
Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
ürün(ler) sepete başarıyla eklendi

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Katalog Numarası Kalite    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?