Yeni KenDrill Deep HPR ile Karbür Derin Delik Delme Ailemizin Modernizasyonu Hakkında Daha Fazla Bilgi Edinin.

Yeni KenDrill Deep HPR, çelik ve demire uygun özellikleri ile mevcut karbür derin delik delme takımları yelpazemizi önemli ölçüde geliştirmiştir. Malzemeye özel bir derin delik matkap ucu olan KenDrill Deep HPR kapsamlı uzunluk ve çap seçenekleriyle stoklarda bulunmaktadır.

  • Isıya ve aşınmaya dayanıklı KCK10A kalitemize sahip HPR matkap ucu geometrimizle kanıtlanmış performans.
  • Geleneksel matkaplardan dört kata kadar daha yüksek hızlarla üstün verimlilik.
  • Rakiplere kıyasla çelik ve demirde daha uzun takım ömrü.
  • Artırılmış metal kaldırma oranıyla elde edilen maliyet tasarrufu.

Çelik ve demir için HPR kısa delik matkabımızı kullandıysanız, yeni derin delik delme çözümümüzü de yeni geometri, kaplama, çekirdek tasarımı ve arka uç özellikleriyle seveceksiniz.

Filtreleri Seçin
Filters
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (241)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (241)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (241)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (241)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (241)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (241)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (241)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (241)
  • K Cast Iron (241)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (241)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (241)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (241)
Applications
Applications
  • Cross Hole Drilling Cross Hole Drilling (241)
  • Drilling Drilling (241)
  • Inclined Exit Drilling Inclined Exit Drilling (241)
  • Stacked Plates Drilling Stacked Plates Drilling (241)
Cutting Diameter
Cutting Diameter
  • 0.094 in (4)
  • 0.095 in (1)
  • 0.098 in (6)
  • 0.103 in (2)
  • 0.105 in (1)
  • 0.106 in (1)
  • 0.109 in (2)
  • 0.11 in (1)
  • 0.111 in (1)
  • 0.119 in (5)
  • 0.124 in (1)
  • 0.125 in (5)
  • 0.126 in (1)
  • 0.13 in (1)
  • 0.138 in (5)
  • 0.142 in (1)
  • 0.143 in (1)
  • 0.146 in (1)
  • 0.152 in (1)
  • 0.156 in (4)
  • 0.157 in (5)
  • 0.165 in (1)
  • 0.169 in (1)
  • 0.177 in (4)
  • 0.182 in (2)
  • 0.188 in (4)
  • 0.189 in (1)
  • 0.197 in (5)
  • 0.199 in (1)
  • 0.201 in (1)
  • 0.206 in (1)
  • 0.208 in (2)
  • 0.213 in (2)
  • 0.217 in (5)
  • 0.219 in (3)
  • 0.224 in (1)
  • 0.228 in (3)
  • 0.232 in (1)
  • 0.237 in (5)
  • 0.244 in (2)
  • 0.25 in (5)
  • 0.256 in (5)
  • 0.257 in (2)
  • 0.266 in (3)
  • 0.268 in (3)
  • 0.272 in (2)
  • 0.276 in (5)
  • 0.281 in (3)
  • 0.284 in (1)
  • 0.295 in (4)
  • 0.297 in (2)
  • 0.303 in (1)
  • 0.313 in (4)
  • 0.315 in (5)
  • 0.323 in (1)
  • 0.328 in (3)
  • 0.332 in (1)
  • 0.335 in (5)
  • 0.343 in (1)
  • 0.345 in (4)
  • 0.354 in (5)
  • 0.358 in (2)
  • 0.362 in (1)
  • 0.374 in (2)
  • 0.375 in (4)
  • 0.384 in (2)
  • 0.394 in (5)
  • 0.402 in (5)
  • 0.408 in (1)
  • 0.414 in (4)
  • 0.422 in (3)
  • 0.425 in (1)
  • 0.433 in (5)
  • 0.453 in (4)
  • 0.465 in (2)
  • 0.473 in (4)
  • 0.492 in (4)
  • 0.5 in (4)
  • 0.512 in (4)
  • 0.516 in (1)
  • 0.531 in (4)
  • 0.551 in (4)
  • 0.564 in (2)
  • 0.572 in (3)
  • 0.591 in (4)
  • 0.602 in (1)
  • 0.61 in (1)
  • 0.625 in (1)
  • 0.63 in (3)
Cutting Diameter Min - Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 2.375 mm (4)
  • 2.401 mm (1)
  • 2.5 mm (6)
  • 2.6 mm (2)
  • 2.651 mm (1)
  • 2.7 mm (1)
  • 2.776 mm (2)
  • 2.801 mm (1)
  • 2.825 mm (1)
  • 3.0 mm (5)
  • 3.151 mm (1)
  • 3.176 mm (5)
  • 3.2 mm (1)
  • 3.301 mm (1)
  • 3.5 mm (5)
  • 3.575 mm (1)
  • 3.6 mm (1)
  • 3.7 mm (1)
  • 3.85 mm (1)
  • 3.975 mm (4)
  • 4.0 mm (5)
  • 4.2 mm (1)
  • 4.3 mm (1)
  • 4.5 mm (4)
  • 4.625 mm (2)
  • 4.775 mm (4)
  • 4.801 mm (1)
  • 5.0 mm (5)
  • 5.051 mm (1)
  • 5.101 mm (1)
  • 5.2 mm (1)
  • 5.25 mm (2)
  • 5.4 mm (2)
  • 5.5 mm (5)
  • 5.551 mm (3)
  • 5.7 mm (1)
  • 5.801 mm (3)
  • 5.9 mm (1)
  • 6.0 mm (5)
  • 6.2 mm (2)
  • 6.351 mm (5)
  • 6.5 mm (5)
  • 6.525 mm (2)
  • 6.75 mm (3)
  • 6.801 mm (3)
  • 6.9 mm (2)
  • 7.0 mm (5)
  • 7.15 mm (3)
  • 7.2 mm (1)
  • 7.5 mm (4)
  • 7.551 mm (2)
  • 7.7 mm (1)
  • 7.95 mm (4)
  • 8.0 mm (5)
  • 8.201 mm (1)
  • 8.326 mm (3)
  • 8.425 mm (1)
  • 8.5 mm (5)
  • 8.701 mm (1)
  • 8.725 mm (4)
  • 9.0 mm (5)
  • 9.1 mm (2)
  • 9.201 mm (1)
  • 9.5 mm (2)
  • 9.525 mm (4)
  • 9.75 mm (2)
  • 10.0 mm (5)
  • 10.201 mm (5)
  • 10.326 mm (1)
  • 10.5 mm (4)
  • 10.726 mm (3)
  • 10.8 mm (1)
  • 11.0 mm (5)
  • 11.5 mm (4)
  • 11.8 mm (2)
  • 12.0 mm (4)
  • 12.5 mm (4)
  • 12.701 mm (4)
  • 13.0 mm (4)
  • 13.101 mm (1)
  • 13.5 mm (4)
  • 14.0 mm (4)
  • 14.3 mm (2)
  • 14.5 mm (3)
  • 15.0 mm (4)
  • 15.3 mm (1)
  • 15.5 mm (1)
  • 15.875 mm (1)
  • 16.0 mm (3)
Cutting Diameter Min - Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 44.0 mm (3)
  • 45.0 mm (4)
  • 56.0 mm (4)
  • 58.0 mm (2)
  • 59.0 mm (3)
  • 60.0 mm (4)
  • 67.0 mm (1)
  • 69.0 mm (1)
  • 70.0 mm (1)
  • 74.0 mm (3)
  • 75.0 mm (6)
  • 77.0 mm (1)
  • 79.0 mm (3)
  • 80.0 mm (1)
  • 81.0 mm (1)
  • 83.0 mm (1)
  • 87.0 mm (1)
  • 88.0 mm (1)
  • 89.0 mm (6)
  • 90.0 mm (3)
  • 94.0 mm (1)
  • 97.0 mm (1)
  • 98.0 mm (1)
  • 99.0 mm (1)
  • 100.0 mm (2)
  • 103.0 mm (1)
  • 104.0 mm (4)
  • 105.0 mm (2)
  • 106.0 mm (2)
  • 112.0 mm (1)
  • 114.0 mm (1)
  • 115.0 mm (1)
  • 116.0 mm (1)
  • 117.0 mm (2)
  • 118.0 mm (2)
  • 119.0 mm (3)
  • 120.0 mm (5)
  • 125.0 mm (1)
  • 133.0 mm (1)
  • 134.0 mm (4)
  • 135.0 mm (1)
  • 136.0 mm (1)
  • 137.0 mm (3)
  • 138.0 mm (3)
  • 139.0 mm (2)
  • 140.0 mm (1)
  • 142.0 mm (1)
  • 144.0 mm (1)
  • 146.0 mm (1)
  • 147.0 mm (2)
  • 148.0 mm (2)
  • 149.0 mm (4)
  • 150.0 mm (3)
  • 154.0 mm (2)
  • 157.0 mm (2)
  • 159.0 mm (2)
  • 160.0 mm (2)
  • 163.0 mm (1)
  • 164.0 mm (2)
  • 165.0 mm (2)
  • 167.0 mm (1)
  • 169.0 mm (1)
  • 171.0 mm (1)
  • 172.0 mm (1)
  • 175.0 mm (3)
  • 176.0 mm (1)
  • 177.0 mm (1)
  • 178.0 mm (2)
  • 179.0 mm (1)
  • 180.0 mm (3)
  • 187.0 mm (1)
  • 194.0 mm (4)
  • 195.0 mm (2)
  • 197.0 mm (2)
  • 198.0 mm (1)
  • 199.0 mm (1)
  • 200.0 mm (3)
  • 202.0 mm (1)
  • 206.0 mm (1)
  • 209.0 mm (1)
  • 210.0 mm (2)
  • 214.0 mm (1)
  • 217.0 mm (1)
  • 219.0 mm (2)
  • 220.0 mm (1)
  • 221.0 mm (1)
  • 224.0 mm (2)
  • 225.0 mm (2)
  • 227.0 mm (1)
  • 228.0 mm (1)
  • 235.0 mm (1)
  • 237.0 mm (1)
  • 238.0 mm (1)
  • 239.0 mm (2)
  • 240.0 mm (5)
  • 250.0 mm (1)
  • 257.0 mm (1)
  • 258.0 mm (1)
  • 259.0 mm (1)
  • 260.0 mm (1)
  • 262.0 mm (1)
  • 263.0 mm (1)
  • 264.0 mm (1)
  • 265.0 mm (1)
  • 267.0 mm (1)
  • 269.0 mm (1)
  • 270.0 mm (1)
  • 273.0 mm (1)
  • 274.0 mm (1)
  • 275.0 mm (1)
  • 277.0 mm (1)
  • 280.0 mm (2)
  • 292.0 mm (1)
  • 294.0 mm (1)
  • 297.0 mm (2)
  • 300.0 mm (3)
  • 307.0 mm (1)
  • 316.0 mm (1)
  • 317.0 mm (1)
  • 318.0 mm (1)
  • 319.0 mm (1)
  • 320.0 mm (2)
  • 322.0 mm (2)
  • 325.0 mm (1)
  • 326.0 mm (1)
  • 330.0 mm (1)
  • 344.0 mm (1)
  • 347.0 mm (1)
  • 350.0 mm (1)
  • 352.0 mm (2)
  • 356.0 mm (1)
  • 360.0 mm (2)
  • 366.0 mm (1)
  • 369.0 mm (1)
  • 375.0 mm (1)
  • 382.0 mm (1)
  • 385.0 mm (1)
  • 387.0 mm (1)
  • 390.0 mm (1)
  • 400.0 mm (2)
  • 412.0 mm (1)
  • 418.0 mm (1)
  • 420.0 mm (1)
  • 422.0 mm (1)
  • 440.0 mm (1)
  • 450.0 mm (1)
Maximum Hole Depth [L4] Min - Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.732 in (3)
  • 1.772 in (4)
  • 2.205 in (4)
  • 2.283 in (2)
  • 2.323 in (3)
  • 2.362 in (4)
  • 2.638 in (1)
  • 2.717 in (1)
  • 2.757 in (1)
  • 2.914 in (3)
  • 2.953 in (6)
  • 3.031 in (1)
  • 3.11 in (3)
  • 3.15 in (1)
  • 3.189 in (1)
  • 3.269 in (1)
  • 3.426 in (1)
  • 3.465 in (1)
  • 3.504 in (6)
  • 3.543 in (3)
  • 3.701 in (1)
  • 3.819 in (1)
  • 3.858 in (1)
  • 3.898 in (1)
  • 3.938 in (2)
  • 4.055 in (1)
  • 4.094 in (4)
  • 4.134 in (2)
  • 4.173 in (2)
  • 4.409 in (1)
  • 4.488 in (1)
  • 4.529 in (1)
  • 4.567 in (1)
  • 4.606 in (2)
  • 4.646 in (2)
  • 4.686 in (3)
  • 4.724 in (5)
  • 4.921 in (1)
  • 5.236 in (1)
  • 5.276 in (4)
  • 5.315 in (1)
  • 5.354 in (1)
  • 5.394 in (3)
  • 5.433 in (3)
  • 5.472 in (2)
  • 5.513 in (1)
  • 5.591 in (1)
  • 5.67 in (1)
  • 5.748 in (1)
  • 5.787 in (2)
  • 5.827 in (2)
  • 5.867 in (4)
  • 5.906 in (3)
  • 6.063 in (2)
  • 6.181 in (2)
  • 6.26 in (2)
  • 6.299 in (2)
  • 6.417 in (1)
  • 6.457 in (2)
  • 6.496 in (2)
  • 6.575 in (1)
  • 6.654 in (1)
  • 6.732 in (1)
  • 6.772 in (1)
  • 6.891 in (3)
  • 6.929 in (1)
  • 6.969 in (1)
  • 7.008 in (2)
  • 7.047 in (1)
  • 7.087 in (3)
  • 7.362 in (1)
  • 7.638 in (4)
  • 7.678 in (2)
  • 7.756 in (2)
  • 7.795 in (1)
  • 7.835 in (1)
  • 7.875 in (3)
  • 7.953 in (1)
  • 8.11 in (1)
  • 8.228 in (1)
  • 8.268 in (2)
  • 8.425 in (1)
  • 8.544 in (1)
  • 8.622 in (2)
  • 8.661 in (1)
  • 8.701 in (1)
  • 8.819 in (2)
  • 8.858 in (2)
  • 8.937 in (1)
  • 8.976 in (1)
  • 9.252 in (1)
  • 9.331 in (1)
  • 9.371 in (1)
  • 9.409 in (2)
  • 9.449 in (5)
  • 9.843 in (1)
  • 10.118 in (1)
  • 10.157 in (1)
  • 10.198 in (1)
  • 10.236 in (1)
  • 10.315 in (1)
  • 10.355 in (1)
  • 10.394 in (1)
  • 10.433 in (1)
  • 10.512 in (1)
  • 10.592 in (1)
  • 10.63 in (1)
  • 10.749 in (1)
  • 10.787 in (1)
  • 10.827 in (1)
  • 10.906 in (1)
  • 11.025 in (2)
  • 11.496 in (1)
  • 11.576 in (1)
  • 11.693 in (2)
  • 11.811 in (3)
  • 12.087 in (1)