successfully added to cart
View Cart

Notifications

Mark all as read

Frezeleme

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (7564)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6260)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6369)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (6406)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (6616)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (7140)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (6633)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (6076)
  • M Stainless Steel (7032)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (7032)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (7030)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (6313)
  • K Cast Iron (6331)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (6330)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (6325)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (5622)
  • N Non-Ferrous Materials (2833)
    • N1
      Wrought Aluminum
      (2802)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (2771)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2539)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (716)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (292)
    • N6
      Carbon, Graphite Composites, CFRP
      (96)
    • N7
      MMC's
      (78)
  • S High-Temp Alloys (5890)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (5388)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (5343)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (5441)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (5674)
  • H Hardened Materials (5123)
    • H1
      Hardened Materials 44-48 HRC
      (5092)
    • H2
      Hardened Materials 48-55 HRC
      (1676)
    • H3
      Hardened Materials 56-60 HRC
      (450)
    • H4
      Hardened Materials >60 HRC
      (191)
  • C CFRP Materials (31)
    • C1
      CFRP, CFRP / CFRP
      (31)
Select First Choice
  • BR (199)
  • CN (898)
  • DE (1272)
  • GB (667)
  • IN (212)
  • SG (400)
  • US (1557)
Applications
Applications
  • Chamfer Milling Chamfer Milling (447)
  • Concave Radius Milling Concave Radius Milling (14)
  • Countersinking Countersinking (14)
  • Drilling Drilling (297)
  • Face Milling Face Milling (3605)
  • Flat Bottom Drilling Flat Bottom Drilling (14)
  • ID Thread Turning ID Thread Turning (104)
  • Pocket Pocket (4655)
  • Pocket Helical Pocket Helical (4647)
  • Pocket Milling Pocket Milling (4899)
  • Pocket Plunge Milling Pocket Plunge Milling (1601)
  • Profile Milling Profile Milling (1300)
  • Ramping Ramping (4640)
  • Shoulder Ball Nose Shoulder Ball Nose (1160)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (263)
  • Shoulder Milling Shoulder Milling (5386)
  • Shoulder Roughing Shoulder Roughing (2512)
  • Shoulder Square End Shoulder Square End (4291)
  • Slot Ball Nose Slot Ball Nose (504)
  • Slot Milling Slot Milling (4071)
  • Slot Side Slot Side (444)
  • Slot Square End Slot Square End (3196)
  • Slot T Slot T (30)
  • Trochoidal Milling Trochoidal Milling (897)
Cutting Diameter
Cutting Diameter
  • 0.0197 in (5)
  • 0.0236 in (5)
  • 0.0315 in (5)
  • 0.0394 in (11)
  • 0.0591 in (9)
  • 0.0625 in (9)
  • 0.0781 in (8)
  • 0.0787 in (38)
  • 0.0938 in (14)
  • 0.0984 in (23)
  • 0.1094 in (6)
  • 0.1181 in (50)
  • 0.125 in (53)
  • 0.1378 in (18)
  • 0.1562 in (8)
  • 0.1563 in (6)
  • 0.157 in (5)
  • 0.1575 in (83)
  • 0.1772 in (8)
  • 0.1875 in (68)
  • 0.1969 in (67)
  • 0.2165 in (6)
  • 0.2188 in (13)
  • 0.236 in (7)
  • 0.2362 in (137)
  • 0.25 in (170)
  • 0.2756 in (18)
  • 0.2812 in (5)
  • 0.2813 in (5)
  • 0.3125 in (82)
  • 0.315 in (161)
  • 0.3438 in (5)
  • 0.35 in (7)
  • 0.3543 in (11)
  • 0.375 in (266)
  • 0.3819 in (6)
  • 0.3937 in (248)
  • 0.394 in (10)
  • 0.4375 in (34)
  • 0.472 in (15)
  • 0.4724 in (266)
  • 0.5 in (428)
  • 0.551 in (5)
  • 0.5512 in (62)
  • 0.5625 in (17)
  • 0.5906 in (5)
  • 0.591 in (7)
  • 0.606 in (6)
  • 0.625 in (262)
  • 0.6299 in (232)
  • 0.63 in (65)
  • 0.7087 in (43)
  • 0.75 in (413)
  • 0.778 in (9)
  • 0.787 in (27)
  • 0.7874 in (267)
  • 0.875 in (15)
  • 0.984 in (41)
  • 0.9843 in (188)
  • 1.0 in (408)
  • 1.028 in (10)
  • 1.102 in (7)
  • 1.181 in (6)
  • 1.25 in (162)
  • 1.2598 in (55)
  • 1.26 in (49)
  • 1.496 in (6)
  • 1.5 in (70)
  • 1.528 in (8)
  • 1.5748 in (35)
  • 1.575 in (48)
  • 1.6535 in (6)
  • 1.968 in (7)
  • 1.9685 in (39)
  • 1.969 in (28)
  • 2.0 in (92)
  • 2.48 in (49)
  • 2.4803 in (36)
  • 2.5 in (65)
  • 3.0 in (104)
  • 3.1496 in (48)
  • 3.15 in (53)
  • 3.937 in (93)
  • 4.0 in (92)
  • 4.921 in (52)
  • 4.9213 in (47)
  • 5.0 in (74)
  • 6.0 in (63)
  • 6.299 in (41)
  • 6.2992 in (38)
  • 6.3 in (12)
  • 7.874 in (53)
  • 8.0 in (38)
  • 9.842 in (6)
  • 9.8425 in (8)
  • 9.843 in (19)
  • 10.0 in (28)
  • 12.0 in (18)
  • 12.401 in (7)
  • 12.402 in (7)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.5 mm (5)
  • 0.6 mm (5)
  • 0.794 mm (5)
  • 0.8 mm (5)
  • 1.0 mm (11)
  • 1.2 mm (4)
  • 1.5 mm (9)
  • 1.588 mm (9)
  • 1.8 mm (4)
  • 1.984 mm (8)
  • 2.0 mm (41)
  • 2.381 mm (12)
  • 2.5 mm (23)
  • 2.778 mm (6)
  • 3.0 mm (53)
  • 3.175 mm (51)
  • 3.5 mm (18)
  • 3.572 mm (4)
  • 3.969 mm (11)
  • 4.0 mm (88)
  • 4.5 mm (8)
  • 4.7625 mm (4)
  • 4.763 mm (63)
  • 5.0 mm (71)
  • 5.5 mm (6)
  • 5.556 mm (13)
  • 6.0 mm (144)
  • 6.35 mm (170)
  • 7.0 mm (18)
  • 7.144 mm (9)
  • 7.9375 mm (8)
  • 7.938 mm (76)
  • 8.0 mm (161)
  • 8.731 mm (5)
  • 8.8 mm (4)
  • 8.9 mm (4)
  • 9.0 mm (11)
  • 9.52 mm (4)
  • 9.525 mm (260)
  • 9.7 mm (6)
  • 10.0 mm (259)
  • 10.319 mm (4)
  • 11.113 mm (32)
  • 11.7 mm (5)
  • 12.0 mm (283)
  • 12.7 mm (427)
  • 13.0 mm (4)
  • 13.7 mm (4)
  • 14.0 mm (67)
  • 14.288 mm (17)
  • 15.0 mm (13)
  • 15.4 mm (4)
  • 15.7 mm (4)
  • 15.875 mm (257)
  • 16.0 mm (294)
  • 16.002 mm (4)
  • 16.04 mm (4)
  • 18.0 mm (44)
  • 19.05 mm (412)
  • 19.75 mm (5)
  • 20.0 mm (299)
  • 22.0 mm (10)
  • 22.225 mm (13)
  • 25.0 mm (229)
  • 25.4 mm (408)
  • 26.1 mm (7)
  • 28.0 mm (11)
  • 30.0 mm (9)
  • 31.75 mm (151)
  • 31.8 mm (10)
  • 32.0 mm (110)
  • 35.0 mm (5)
  • 38.0 mm (9)
  • 38.1 mm (69)
  • 40.0 mm (86)
  • 42.0 mm (7)
  • 47.0 mm (5)
  • 50.0 mm (76)
  • 50.8 mm (90)
  • 51.0 mm (8)
  • 54.0 mm (5)
  • 63.0 mm (84)
  • 63.5 mm (65)
  • 64.0 mm (5)
  • 68.0 mm (7)
  • 76.2 mm (104)
  • 80.0 mm (100)
  • 84.0 mm (5)
  • 100.0 mm (94)
  • 101.6 mm (90)
  • 125.0 mm (102)
  • 127.0 mm (73)
  • 152.4 mm (61)
  • 160.0 mm (87)
  • 200.0 mm (52)
  • 203.2 mm (35)
  • 250.0 mm (34)
  • 254.0 mm (27)
  • 304.8 mm (18)
  • 315.0 mm (19)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 12.0 mm (3)
  • 12.7 mm (2)
  • 15.0 mm (6)
  • 15.875 mm (5)
  • 16.0 mm (6)
  • 19.05 mm (12)
  • 20.0 mm (19)
  • 24.0 mm (2)
  • 25.0 mm (30)
  • 25.2 mm (2)
  • 25.4 mm (25)
  • 28.0 mm (2)
  • 30.0 mm (2)
  • 31.55 mm (3)
  • 31.74 mm (3)
  • 31.75 mm (22)
  • 31.8 mm (3)
  • 32.0 mm (37)
  • 33.18 mm (5)
  • 33.58 mm (5)
  • 35.0 mm (13)
  • 37.9 mm (2)
  • 38.1 mm (34)
  • 38.15 mm (2)
  • 38.55 mm (2)
  • 39.923 mm (6)
  • 40.0 mm (26)
  • 40.173 mm (6)
  • 40.9 mm (2)
  • 41.1 mm (7)
  • 42.0 mm (7)
  • 44.46 mm (2)
  • 45.15 mm (2)
  • 45.974 mm (2)
  • 46.267 mm (2)
  • 46.36 mm (2)
  • 47.1 mm (2)
  • 48.0 mm (2)
  • 48.165 mm (2)
  • 48.95 mm (2)
  • 49.0 mm (6)
  • 50.0 mm (33)
  • 50.6 mm (2)
  • 50.64 mm (2)
  • 50.8 mm (31)
  • 51.0 mm (3)
  • 51.01 mm (2)
  • 51.44 mm (2)
  • 51.8 mm (4)
  • 52.0 mm (17)
  • 53.95 mm (3)
  • 56.35 mm (2)
  • 57.15 mm (2)
  • 58.0 mm (2)
  • 58.159 mm (3)
  • 58.9 mm (2)
  • 58.958 mm (3)
  • 63.0 mm (34)
  • 63.5 mm (20)
  • 63.88 mm (6)
  • 66.0 mm (19)
  • 71.154 mm (3)
  • 71.653 mm (3)
  • 74.0 mm (3)
  • 74.5 mm (3)
  • 76.2 mm (24)
  • 76.81 mm (6)
  • 80.0 mm (26)
  • 84.348 mm (3)
  • 87.2 mm (3)
  • 88.148 mm (3)
  • 88.646 mm (5)
  • 88.7 mm (4)
  • 91.0 mm (3)
  • 93.76 mm (6)
  • 100.0 mm (19)
  • 101.6 mm (19)
  • 108.145 mm (3)
  • 109.743 mm (3)
  • 110.236 mm (4)
  • 110.98 mm (3)
  • 112.7 mm (3)
  • 113.71 mm (4)
  • 125.0 mm (15)
  • 127.0 mm (11)
  • 133.145 mm (3)
  • 135.14 mm (3)
  • 135.636 mm (5)
  • 136.0 mm (3)
  • 138.67 mm (4)
  • 152.4 mm (9)
  • 160.0 mm (11)
  • 161.036 mm (5)
  • 170.97 mm (3)
  • 173.64 mm (3)
  • 200.0 mm (4)
  • 203.2 mm (3)
  • 211.836 mm (3)
  • 262.636 mm (4)
  • 313.436 mm (5)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.4724 in (3)
  • 0.5 in (2)
  • 0.5906 in (6)
  • 0.625 in (6)
  • 0.63 in (4)
  • 0.75 in (12)
  • 0.787 in (12)
  • 0.7874 in (8)
  • 0.984 in (20)
  • 0.9842 in (2)
  • 0.9843 in (7)
  • 1.0 in (27)
  • 1.1811 in (2)
  • 1.2421 in (3)
  • 1.25 in (28)
  • 1.259 in (3)
  • 1.2598 in (12)
  • 1.2599 in (3)
  • 1.26 in (19)
  • 1.306 in (5)
  • 1.322 in (5)
  • 1.377 in (2)
  • 1.378 in (10)
  • 1.5 in (35)
  • 1.502 in (2)
  • 1.518 in (2)
  • 1.572 in (6)
  • 1.5748 in (5)
  • 1.575 in (19)
  • 1.582 in (7)
  • 1.61 in (2)
  • 1.618 in (2)
  • 1.6181 in (4)
  • 1.6536 in (3)
  • 1.654 in (3)
  • 1.75 in (2)
  • 1.778 in (2)
  • 1.81 in (2)
  • 1.822 in (2)
  • 1.825 in (2)
  • 1.856 in (2)
  • 1.89 in (2)
  • 1.896 in (2)
  • 1.927 in (2)
  • 1.9291 in (6)
  • 1.9685 in (15)
  • 1.969 in (14)
  • 1.97 in (3)
  • 2.0 in (31)
  • 2.008 in (5)
  • 2.0394 in (4)
  • 2.047 in (8)
  • 2.0472 in (6)
  • 2.124 in (3)
  • 2.29 in (3)
  • 2.321 in (3)
  • 2.48 in (18)
  • 2.4803 in (14)
  • 2.5 in (22)
  • 2.515 in (6)
  • 2.598 in (9)
  • 2.5984 in (9)
  • 2.801 in (3)
  • 2.821 in (3)
  • 2.913 in (3)
  • 2.933 in (3)
  • 3.0 in (28)
  • 3.024 in (6)
  • 3.1496 in (9)
  • 3.15 in (16)
  • 3.321 in (3)
  • 3.433 in (3)
  • 3.47 in (3)
  • 3.49 in (5)
  • 3.4921 in (3)
  • 3.691 in (4)
  • 3.937 in (17)
  • 4.0 in (25)
  • 4.258 in (3)
  • 4.321 in (3)
  • 4.34 in (5)
  • 4.431 in (3)
  • 4.921 in (7)
  • 4.9213 in (7)
  • 5.0 in (15)
  • 5.242 in (3)
  • 5.32 in (3)
  • 5.34 in (7)
  • 5.4312 in (3)
  • 6.0 in (12)
  • 6.299 in (5)
  • 6.2992 in (6)
  • 6.34 in (5)
  • 6.4318 in (3)
  • 6.731 in (3)
  • 7.874 in (4)
  • 8.0 in (5)
  • 8.34 in (3)
  • 10.34 in (4)
  • 12.34 in (5)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.9 mm (23)
  • 1.0 mm (36)
  • 1.02 mm (12)
  • 1.09 mm (15)
  • 1.5 mm (104)
  • 1.6 mm (12)
  • 2.0 mm (16)
  • 2.21 mm (12)
  • 2.5 mm (76)
  • 3.0 mm (76)
  • 3.2 mm (15)
  • 3.23 mm (44)
  • 3.5 mm (101)
  • 3.96 mm (19)
  • 4.0 mm (65)
  • 4.3 mm (22)
  • 4.5 mm (34)
  • 4.51 mm (12)
  • 4.762 mm (11)
  • 5.0 mm (169)
  • 5.5 mm (61)
  • 5.89 mm (11)
  • 5.9 mm (18)
  • 5.99 mm (36)
  • 6.0 mm (171)
  • 6.35 mm (58)
  • 6.5 mm (20)
  • 6.57 mm (13)
  • 6.6 mm (21)
  • 6.61 mm (19)
  • 7.0 mm (31)
  • 7.938 mm (17)
  • 8.0 mm (171)
  • 9.0 mm (45)
  • 9.119 mm (15)
  • 9.16 mm (39)
  • 9.17 mm (14)
  • 9.5 mm (40)
  • 9.525 mm (74)
  • 9.87 mm (15)
  • 9.96 mm (16)
  • 10.0 mm (71)
  • 10.03 mm (18)
  • 11.0 mm (135)
  • 11.7 mm (12)
  • 12.0 mm (72)
  • 12.144 mm (12)
  • 12.7 mm (116)
  • 13.0 mm (79)
  • 14.0 mm (45)
  • 14.288 mm (47)
  • 14.6 mm (15)
  • 15.0 mm (86)
  • 15.5 mm (72)
  • 15.875 mm (140)
  • 16.0 mm (113)
  • 17.15 mm (13)
  • 17.4 mm (20)
  • 18.0 mm (135)
  • 19.0 mm (60)
  • 19.05 mm (194)
  • 20.0 mm (31)
  • 20.638 mm (12)
  • 20.65 mm (12)
  • 22.0 mm (99)
  • 22.225 mm (71)
  • 23.812 mm (20)
  • 23.813 mm (15)
  • 24.0 mm (107)
  • 25.0 mm (30)
  • 25.4 mm (212)
  • 25.45 mm (12)
  • 26.0 mm (124)
  • 28.0 mm (14)
  • 28.575 mm (84)
  • 30.0 mm (104)
  • 31.75 mm (204)
  • 32.0 mm (142)
  • 36.0 mm (33)
  • 37.5 mm (53)
  • 38.0 mm (96)
  • 38.1 mm (277)
  • 40.0 mm (19)
  • 41.275 mm (46)
  • 41.28 mm (12)
  • 44.45 mm (39)
  • 45.0 mm (76)
  • 47.625 mm (36)
  • 48.0 mm (32)
  • 50.0 mm (13)
  • 50.8 mm (90)
  • 57.15 mm (123)
  • 60.0 mm (28)
  • 63.5 mm (35)
  • 75.0 mm (30)
  • 76.2 mm (103)
  • 82.55 mm (15)
  • 88.9 mm (14)
  • 101.6 mm (52)
  • 127.0 mm (24)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.0394 in (25)
  • 0.04 in (15)
  • 0.043 in (17)
  • 0.059 in (40)
  • 0.0591 in (54)
  • 0.0787 in (16)
  • 0.087 in (17)
  • 0.098 in (37)
  • 0.0984 in (41)
  • 0.117 in (16)
  • 0.118 in (24)
  • 0.1181 in (37)
  • 0.125 in (15)
  • 0.127 in (56)
  • 0.1378 in (64)
  • 0.138 in (39)
  • 0.156 in (18)
  • 0.1575 in (57)
  • 0.171 in (22)
  • 0.177 in (33)
  • 0.1875 in (23)
  • 0.1969 in (95)
  • 0.197 in (47)
  • 0.2 in (21)
  • 0.215 in (35)
  • 0.22 in (21)
  • 0.232 in (29)
  • 0.236 in (113)
  • 0.2362 in (86)
  • 0.249 in (21)
  • 0.25 in (64)
  • 0.256 in (17)
  • 0.259 in (18)
  • 0.26 in (25)
  • 0.2602 in (15)
  • 0.2756 in (25)
  • 0.3125 in (17)
  • 0.315 in (170)
  • 0.3543 in (39)
  • 0.359 in (25)
  • 0.361 in (53)
  • 0.374 in (39)
  • 0.375 in (88)
  • 0.3886 in (15)
  • 0.3937 in (66)
  • 0.395 in (16)
  • 0.433 in (73)
  • 0.4331 in (60)
  • 0.461 in (21)
  • 0.4724 in (72)
  • 0.4781 in (18)
  • 0.5 in (117)
  • 0.5118 in (72)
  • 0.551 in (14)
  • 0.5512 in (21)
  • 0.56 in (30)
  • 0.5625 in (48)
  • 0.57 in (23)
  • 0.5906 in (79)
  • 0.61 in (63)
  • 0.625 in (148)
  • 0.6299 in (92)
  • 0.63 in (24)
  • 0.69 in (26)
  • 0.7087 in (84)
  • 0.709 in (26)
  • 0.71 in (34)
  • 0.748 in (58)
  • 0.75 in (196)
  • 0.7874 in (29)
  • 0.8125 in (15)
  • 0.8661 in (98)
  • 0.875 in (76)
  • 0.9375 in (35)
  • 0.9449 in (104)
  • 0.9843 in (22)
  • 1.0 in (212)
  • 1.0236 in (118)
  • 1.125 in (84)
  • 1.1811 in (98)
  • 1.25 in (208)