Ürün Önerileri

Product Family suggestions

sepete başarıyla eklendi
Sepeti Görüntüle

Bildirimler

Tümünü okundu olarak işaretle
Mobile Menu

Katı Şaft Frezeleme

Filtreleri Seçin
Filters
Filtreler
Filtreler
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (3573)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2736)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2736)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2773)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2980)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (3397)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2746)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2189)
  • M Stainless Steel (3186)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (3186)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (3186)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2469)
  • K Cast Iron (2790)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2790)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2790)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2117)
  • N Non-Ferrous Materials (884)
    • N1
      Wrought Aluminum
      (853)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (853)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (581)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (716)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (292)
    • N6
      Carbon, Graphite Composites, CFRP
      (96)
    • N7
      MMC's
      (78)
  • S High-Temp Alloys (2206)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2152)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2104)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2169)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2090)
  • H Hardened Materials (2799)
    • H1
      Hardened Materials 44-48 HRC
      (2787)
    • H2
      Hardened Materials 48-55 HRC
      (1356)
    • H3
      Hardened Materials 56-60 HRC
      (256)
    • H4
      Hardened Materials >60 HRC
      (191)
  • C CFRP Materials (31)
    • C1
      CFRP, CFRP / CFRP
      (31)
First Choicei Seçin
  • BR (91)
  • CN (365)
  • DE (598)
  • GB (280)
  • IN (75)
  • SG (187)
  • US (998)
Applications
Applications
  • Chamfer Milling Chamfer Milling (12)
  • Concave Radius Milling Concave Radius Milling (14)
  • Drilling Drilling (247)
  • Face Milling Face Milling (1586)
  • Pocket Pocket (3642)
  • Pocket Helical Pocket Helical (3769)
  • Pocket Milling Pocket Milling (3815)
  • Pocket Plunge Milling Pocket Plunge Milling (1297)
  • Profile Milling Profile Milling (527)
  • Ramping Ramping (3533)
  • Shoulder Ball Nose Shoulder Ball Nose (755)
  • Shoulder Milling Shoulder Milling (4008)
  • Shoulder Roughing Shoulder Roughing (1807)
  • Shoulder Square End Shoulder Square End (3571)
  • Slot Ball Nose Slot Ball Nose (362)
  • Slot Milling Slot Milling (2888)
  • Slot Square End Slot Square End (2648)
  • Trochoidal Milling Trochoidal Milling (937)
Cutting Diameter
Cutting Diameter
  • 0.012 in (2)
  • 0.016 in (4)
  • 0.02 in (5)
  • 0.024 in (5)
  • 0.031 in (10)
  • 0.039 in (11)
  • 0.047 in (7)
  • 0.055 in (2)
  • 0.06 in (9)
  • 0.063 in (12)
  • 0.072 in (4)
  • 0.078 in (8)
  • 0.079 in (41)
  • 0.094 in (14)
  • 0.095 in (1)
  • 0.098 in (23)
  • 0.109 in (6)
  • 0.11 in (3)
  • 0.119 in (53)
  • 0.125 in (53)
  • 0.138 in (18)
  • 0.142 in (4)
  • 0.15 in (3)
  • 0.156 in (15)
  • 0.157 in (88)
  • 0.173 in (2)
  • 0.177 in (8)
  • 0.187 in (1)
  • 0.188 in (69)
  • 0.189 in (3)
  • 0.197 in (69)
  • 0.203 in (3)
  • 0.217 in (6)
  • 0.219 in (14)
  • 0.226 in (3)
  • 0.234 in (3)
  • 0.237 in (140)
  • 0.25 in (167)
  • 0.256 in (1)
  • 0.266 in (2)
  • 0.276 in (17)
  • 0.281 in (10)
  • 0.297 in (2)
  • 0.303 in (1)
  • 0.305 in (3)
  • 0.312 in (1)
  • 0.313 in (84)
  • 0.315 in (151)
  • 0.328 in (2)
  • 0.345 in (5)
  • 0.354 in (11)
  • 0.359 in (2)
  • 0.375 in (266)
  • 0.382 in (6)
  • 0.391 in (2)
  • 0.394 in (245)
  • 0.408 in (4)
  • 0.422 in (2)
  • 0.433 in (1)
  • 0.437 in (4)
  • 0.438 in (34)
  • 0.453 in (2)
  • 0.461 in (4)
  • 0.47 in (2)
  • 0.473 in (271)
  • 0.484 in (2)
  • 0.5 in (421)
  • 0.539 in (4)
  • 0.551 in (66)
  • 0.564 in (17)
  • 0.591 in (1)
  • 0.618 in (4)
  • 0.625 in (248)
  • 0.629 in (3)
  • 0.63 in (266)
  • 0.687 in (3)
  • 0.689 in (1)
  • 0.698 in (3)
  • 0.709 in (41)
  • 0.75 in (375)
  • 0.776 in (4)
  • 0.787 in (241)
  • 0.875 in (12)
  • 0.984 in (157)
  • 1.0 in (334)
  • 1.25 in (90)
  • 1.26 in (15)
  • 1.5 in (7)
  • 1.575 in (2)
  • 1.969 in (1)
  • 2.0 in (1)
Cutting Diameter Min - Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.301 mm (2)
  • 0.4 mm (4)
  • 0.5 mm (5)
  • 0.601 mm (5)
  • 0.8 mm (10)
  • 1.0 mm (11)
  • 1.201 mm (7)
  • 1.401 mm (2)
  • 1.5 mm (9)
  • 1.6 mm (12)
  • 1.8 mm (4)
  • 1.975 mm (8)
  • 2.0 mm (41)
  • 2.375 mm (14)
  • 2.401 mm (1)
  • 2.5 mm (23)
  • 2.776 mm (6)
  • 2.801 mm (3)
  • 3.0 mm (53)
  • 3.176 mm (53)
  • 3.5 mm (18)
  • 3.575 mm (4)
  • 3.801 mm (3)
  • 3.95 mm (2)
  • 3.975 mm (13)
  • 4.0 mm (88)
  • 4.375 mm (2)
  • 4.5 mm (8)
  • 4.75 mm (1)
  • 4.775 mm (69)
  • 4.801 mm (3)
  • 5.0 mm (69)
  • 5.15 mm (3)
  • 5.5 mm (6)
  • 5.551 mm (14)
  • 5.75 mm (3)
  • 5.95 mm (3)
  • 6.0 mm (140)
  • 6.351 mm (167)
  • 6.5 mm (1)
  • 6.75 mm (2)
  • 7.0 mm (17)
  • 7.15 mm (10)
  • 7.551 mm (2)
  • 7.7 mm (1)
  • 7.75 mm (3)
  • 7.926 mm (1)
  • 7.95 mm (84)
  • 8.0 mm (151)
  • 8.326 mm (2)
  • 8.725 mm (5)
  • 9.0 mm (11)
  • 9.125 mm (2)
  • 9.525 mm (266)
  • 9.701 mm (6)
  • 9.925 mm (2)
  • 10.0 mm (245)
  • 10.326 mm (4)
  • 10.726 mm (2)
  • 11.0 mm (1)
  • 11.101 mm (4)
  • 11.125 mm (34)
  • 11.5 mm (2)
  • 11.701 mm (4)
  • 11.9 mm (2)
  • 12.0 mm (271)
  • 12.3 mm (2)
  • 12.701 mm (421)
  • 13.701 mm (4)
  • 14.0 mm (66)
  • 14.3 mm (17)
  • 15.0 mm (1)
  • 15.701 mm (4)
  • 15.875 mm (248)
  • 15.976 mm (3)
  • 16.0 mm (266)
  • 17.45 mm (3)
  • 17.475 mm (1)
  • 17.7 mm (3)
  • 18.0 mm (41)
  • 19.05 mm (375)
  • 19.701 mm (4)
  • 20.0 mm (241)
  • 22.225 mm (12)
  • 25.0 mm (157)
  • 25.401 mm (334)
  • 31.75 mm (90)
  • 32.0 mm (15)
  • 38.1 mm (7)
  • 40.0 mm (2)
  • 50.0 mm (1)
  • 50.801 mm (1)
Cutting Diameter Min - Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 7.45 mm (1)
  • 7.625 mm (1)
  • 7.95 mm (1)
  • 8.625 mm (1)
  • 9.025 mm (1)
  • 9.25 mm (1)
  • 9.625 mm (1)
  • 11.101 mm (1)
  • 11.451 mm (1)
  • 11.625 mm (1)
  • 12.101 mm (1)
  • 13.451 mm (1)
  • 14.625 mm (1)
  • 14.8 mm (1)
  • 14.826 mm (1)
  • 14.925 mm (1)
  • 14.951 mm (1)
  • 15.101 mm (1)
  • 15.175 mm (1)
  • 15.25 mm (1)
  • 15.275 mm (1)
  • 15.351 mm (1)
  • 15.451 mm (1)
  • 25.401 mm (1)
Maximum Cutting Diameter Min - Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.293 in (1)
  • 0.3 in (1)
  • 0.313 in (1)
  • 0.34 in (1)
  • 0.355 in (1)
  • 0.364 in (1)
  • 0.379 in (1)
  • 0.437 in (1)
  • 0.451 in (1)
  • 0.458 in (1)
  • 0.477 in (1)
  • 0.53 in (1)
  • 0.577 in (1)
  • 0.583 in (1)
  • 0.584 in (1)
  • 0.588 in (1)
  • 0.589 in (1)
  • 0.595 in (1)
  • 0.597 in (1)
  • 0.6 in (1)
  • 0.601 in (1)
  • 0.604 in (1)
  • 0.608 in (1)
  • 1.0 in (1)
Maximum Cutting Diameter Min - Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.4 mm (3)
  • 0.426 mm (3)
  • 0.5 mm (4)
  • 0.525 mm (4)
  • 0.625 mm (4)
  • 0.675 mm (4)
  • 0.8 mm (3)
  • 0.851 mm (6)
  • 1.0 mm (5)
  • 1.5 mm (10)
  • 1.6 mm (4)
  • 1.975 mm (5)
  • 2.0 mm (16)
  • 3.0 mm (21)
  • 3.176 mm (7)
  • 3.975 mm (6)
  • 4.0 mm (40)
  • 4.75 mm (11)
  • 4.775 mm (6)
  • 5.0 mm (36)
  • 6.0 mm (50)
  • 6.301 mm (6)
  • 6.351 mm (21)
  • 6.75 mm (4)
  • 7.0 mm (31)
  • 7.15 mm (5)
  • 7.5 mm (5)
  • 7.551 mm (4)
  • 7.95 mm (14)
  • 8.0 mm (59)
  • 8.326 mm (4)
  • 9.0 mm (39)
  • 9.5 mm (4)
  • 9.525 mm (57)
  • 10.0 mm (51)
  • 10.726 mm (4)
  • 11.0 mm (40)
  • 11.125 mm (8)
  • 12.0 mm (71)
  • 12.3 mm (5)
  • 12.701 mm (100)
  • 13.0 mm (79)
  • 14.0 mm (21)
  • 14.3 mm (52)
  • 15.0 mm (87)
  • 15.875 mm (146)
  • 16.0 mm (66)
  • 18.0 mm (97)
  • 19.0 mm (54)
  • 19.05 mm (194)
  • 20.0 mm (29)
  • 20.651 mm (12)
  • 22.0 mm (91)
  • 22.225 mm (76)
  • 23.8 mm (20)
  • 23.826 mm (17)
  • 24.0 mm (110)
  • 25.0 mm (22)
  • 25.401 mm (212)
  • 26.0 mm (124)
  • 28.0 mm (7)
  • 28.576 mm (86)
  • 30.0 mm (106)
  • 31.701 mm (4)
  • 31.75 mm (204)
  • 32.0 mm (134)
  • 34.926 mm (4)
  • 36.0 mm (27)
  • 37.5 mm (54)
  • 38.0 mm (96)
  • 38.1 mm (278)
  • 40.0 mm (17)
  • 41.276 mm (63)
  • 44.45 mm (39)
  • 45.0 mm (76)
  • 47.625 mm (41)
  • 48.0 mm (33)
  • 50.0 mm (17)
  • 50.801 mm (89)
  • 53.975 mm (4)
  • 56.0 mm (8)
  • 57.151 mm (123)
  • 60.0 mm (33)
  • 63.5 mm (39)
  • 66.675 mm (7)
  • 75.0 mm (30)
  • 76.2 mm (103)
  • 79.375 mm (14)
  • 80.0 mm (14)
  • 82.551 mm (15)
  • 88.9 mm (14)
  • 95.25 mm (14)
  • 100.0 mm (13)
  • 101.601 mm (52)
  • 114.301 mm (10)
  • 125.0 mm (12)
  • 127.0 mm (28)
  • 139.701 mm (6)
  • 152.4 mm (11)
  • 165.101 mm (9)
Cutting Length Min - Cutting Length Max
Cutting Length
Cutting Length
  • 0.014 in (3)
  • 0.016 in (3)
  • 0.017 in (3)
  • 0.02 in (4)
  • 0.021 in (4)
  • 0.025 in (4)
  • 0.027 in (4)
  • 0.034 in (6)
  • 0.039 in (5)
  • 0.06 in (13)
  • 0.063 in (4)
  • 0.078 in (5)
  • 0.079 in (16)
  • 0.119 in (21)
  • 0.125 in (7)
  • 0.156 in (7)
  • 0.157 in (40)
  • 0.187 in (11)
  • 0.188 in (6)
  • 0.197 in (36)
  • 0.237 in (50)
  • 0.248 in (6)
  • 0.25 in (21)
  • 0.266 in (4)
  • 0.276 in (31)
  • 0.281 in (5)
  • 0.295 in (5)
  • 0.297 in (4)
  • 0.313 in (14)
  • 0.315 in (59)
  • 0.328 in (4)
  • 0.354 in (39)
  • 0.374 in (4)
  • 0.375 in (57)
  • 0.394 in (51)
  • 0.422 in (4)
  • 0.433 in (40)
  • 0.438 in (8)
  • 0.473 in (71)
  • 0.484 in (5)
  • 0.5 in (100)
  • 0.512 in (79)
  • 0.551 in (21)
  • 0.564 in (52)
  • 0.591 in (87)
  • 0.625 in (146)
  • 0.63 in (66)
  • 0.709 in (97)
  • 0.748 in (54)
  • 0.75 in (194)
  • 0.787 in (29)
  • 0.814 in (12)
  • 0.866 in (91)
  • 0.875 in (76)
  • 0.937 in (20)
  • 0.939 in (17)
  • 0.946 in (110)
  • 0.984 in (22)
  • 1.0 in (212)
  • 1.024 in (124)
  • 1.102 in (7)
  • 1.125 in (86)
  • 1.181 in (106)
  • 1.248 in (4)
  • 1.25 in (204)
  • 1.26 in (134)
  • 1.375 in (4)
  • 1.417 in (27)
  • 1.476 in (54)
  • 1.496 in (96)
  • 1.5 in (278)
  • 1.575 in (17)
  • 1.625 in (63)
  • 1.75 in (39)
  • 1.772 in (76)
  • 1.875 in (41)
  • 1.891 in (33)
  • 1.969 in (17)
  • 2.0 in (89)
  • 2.125 in (4)
  • 2.205 in (8)
  • 2.25 in (123)
  • 2.362 in (33)
  • 2.5 in (39)
  • 2.625 in (7)
  • 2.953 in (30)
  • 3.0 in (103)
  • 3.125 in (14)
  • 3.15 in (14)
  • 3.25 in (15)
  • 3.5 in (14)
  • 3.75 in (14)
  • 3.938 in (13)
  • 4.0 in (52)
  • 4.5 in (10)
  • 4.921 in (12)
  • 5.0 in (28)
  • 5.5 in (6)
  • 6.0 in (11)
  • 6.5 in (9)
Cutting Length Min - Cutting Length Max
Reach
Reach
  • 0.177 in (6)
  • 0.197 in (6)
  • 0.237 in (11)
  • 0.25 in (6)
  • 0.272 in (5)
  • 0.276 in (6)
  • 0.313 in (7)
  • 0.315 in (11)
  • 0.354 in (12)
  • 0.375 in (19)
  • 0.394 in (12)
  • 0.433 in (15)
  • 0.473 in (25)
  • 0.492 in (6)
  • 0.5 in (51)
  • 0.512 in (28)
  • 0.551 in (5)
  • 0.564 in (9)
  • 0.591 in (13)
  • 0.61 in (6)
  • 0.625 in (64)
  • 0.63 in (44)
  • 0.656 in (5)
  • 0.69 in (11)
  • 0.709 in (53)
  • 0.732 in (6)
  • 0.748 in (20)
  • 0.75 in (90)
  • 0.787 in (9)
  • 0.828 in (10)
  • 0.843 in (27)
  • 0.866 in (30)