1px Placeholder

Karbür parmak freze uygulama performansına sahip TEK modüler sistem 

Karbür parmak freze uygulama performansına sahip TEK modüler sistem

Duo-Lock Karbür parmak frezeleme uygulamaları için devrimsel nitelikte yeni bir bağlama tipidir.

Bu bir benzeriyle değiştirilebilir kafa tasarımı, salgıda ve takım boyunda tekrarlanabilirlik yüksek hassas doğruluğu, maksimum sürdürülebilir sağlamlıkla birleştirerek onu
hassas ve neredeyse kırılmaz bir arayüz haline getirir.

Duo-Lock’u iş milinize mükemmel bir şekilde uyarlamak için çok çeşitli adaptörler ve uzatmalar mevcuttur.

  • Silindirik ve konik Safe-Lock™ özellikli standart boylarda uzatma adaptörleri.
  • İstenen ölçüde, silindirik ve konik uzatma adaptörleri.
  • HSK, PSC, CV ve BT şaft arka uçlu tümleşik adaptörler.
  • Yenileme, takım ömrünü ve yatırımınızı en üst düzeye çıkarır.
Filtreleri Seçin
Filters
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (377)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (227)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (227)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (235)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (245)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (322)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (377)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (282)
  • M Stainless Steel (323)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (323)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (323)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (323)
  • K Cast Iron (219)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (219)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (219)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (219)
  • N Non-Ferrous Materials (79)
    • N1
      Wrought Aluminum (79)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (79)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (79)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (79)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (79)
    • N6
      Carbon, Graphite Composites, CFRP (34)
    • N7
      MMC's (34)
  • S High-Temp Alloys (361)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (361)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (351)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (361)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (351)
  • H Hardened Materials (350)
    • H1
      Hardened Materials 44-48 HRC (350)
    • H2
      Hardened Materials 48-55 HRC (290)
    • H3
      Hardened Materials 56-60 HRC (18)
    • H4
      Hardened Materials >60 HRC (8)
First Choicei Seçin
  • DE (44)
  • GB (16)
  • IN (1)
  • SG (2)
  • US (17)
Applications
Applications
  • Chamfer Milling Chamfer Milling (12)
  • Concave Radius Milling Concave Radius Milling (14)
  • Face Milling Face Milling (223)
  • Pocket Pocket (340)
  • Pocket Helical Pocket Helical (322)
  • Pocket Milling Pocket Milling (348)
  • Pocket Plunge Milling Pocket Plunge Milling (87)
  • Profile Milling Profile Milling (36)
  • Ramping Ramping (270)
  • Shoulder Ball Nose Shoulder Ball Nose (28)
  • Shoulder Milling Shoulder Milling (352)
  • Shoulder Roughing Shoulder Roughing (224)
  • Shoulder Square End Shoulder Square End (269)
  • Slot Ball Nose Slot Ball Nose (49)
  • Slot Milling Slot Milling (187)
  • Slot Square End Slot Square End (169)
Cutting Diameter
Cutting Diameter
  • 0.02 in (12)
  • 0.135 in (1)
  • 0.157 in (1)
  • 0.237 in (1)
  • 0.255 in (1)
  • 0.26 in (1)
  • 0.276 in (1)
  • 0.315 in (2)
  • 0.375 in (35)
  • 0.38 in (1)
  • 0.382 in (1)
  • 0.393 in (1)
  • 0.394 in (31)
  • 0.44 in (1)
  • 0.461 in (1)
  • 0.473 in (34)
  • 0.5 in (45)
  • 0.505 in (1)
  • 0.618 in (1)
  • 0.625 in (39)
  • 0.629 in (3)
  • 0.63 in (44)
  • 0.75 in (39)
  • 0.776 in (1)
  • 0.787 in (41)
  • 0.984 in (28)
  • 1.0 in (37)
  • 1.25 in (11)
  • 1.26 in (15)
Cutting Diameter Min - Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.5 mm (12)
  • 3.426 mm (1)
  • 4.0 mm (1)
  • 6.0 mm (1)
  • 6.476 mm (1)
  • 6.601 mm (1)
  • 7.0 mm (1)
  • 8.0 mm (2)
  • 9.525 mm (35)
  • 9.65 mm (1)
  • 9.701 mm (1)
  • 9.976 mm (1)
  • 10.0 mm (31)
  • 11.175 mm (1)
  • 11.701 mm (1)
  • 12.0 mm (34)
  • 12.701 mm (45)
  • 12.826 mm (1)
  • 15.701 mm (1)
  • 15.875 mm (39)
  • 15.976 mm (3)
  • 16.0 mm (44)
  • 19.05 mm (39)
  • 19.701 mm (1)
  • 20.0 mm (41)
  • 25.0 mm (28)
  • 25.401 mm (37)
  • 31.75 mm (11)
  • 32.0 mm (15)
Cutting Diameter Min - Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 9.525 mm (4)
  • 10.0 mm (4)
  • 12.0 mm (5)
  • 12.701 mm (5)
  • 15.875 mm (3)
  • 16.0 mm (5)
  • 25.401 mm (1)
Maximum Cutting Diameter Min - Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.375 in (4)
  • 0.394 in (4)
  • 0.473 in (5)
  • 0.5 in (5)
  • 0.625 in (3)
  • 0.63 in (5)
  • 1.0 in (1)
Maximum Cutting Diameter Min - Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.5 mm (2)
  • 0.525 mm (2)
  • 0.625 mm (2)
  • 0.675 mm (2)
  • 0.75 mm (1)
  • 0.851 mm (4)
  • 1.0 mm (2)
  • 1.026 mm (1)
  • 1.05 mm (2)
  • 1.276 mm (1)
  • 1.5 mm (1)
  • 1.526 mm (3)
  • 1.901 mm (1)
  • 2.0 mm (4)
  • 2.551 mm (2)
  • 3.0 mm (5)
  • 3.051 mm (2)
  • 3.176 mm (2)
  • 4.0 mm (3)
  • 4.525 mm (1)
  • 7.15 mm (3)
  • 7.5 mm (3)
  • 9.0 mm (3)
  • 9.525 mm (3)
  • 11.9 mm (3)
  • 12.0 mm (3)
  • 14.3 mm (33)
  • 15.0 mm (29)
  • 17.5 mm (1)
  • 18.0 mm (28)
  • 18.55 mm (1)
  • 19.05 mm (39)
  • 23.8 mm (20)
  • 23.826 mm (14)
  • 24.0 mm (43)
  • 28.576 mm (34)
  • 30.0 mm (37)
  • 37.5 mm (28)
  • 38.1 mm (36)
  • 47.625 mm (11)
  • 48.0 mm (15)
Cutting Length Min - Cutting Length Max
Cutting Length
Cutting Length
  • 0.02 in (2)
  • 0.021 in (2)
  • 0.025 in (2)
  • 0.027 in (2)
  • 0.03 in (1)
  • 0.034 in (4)
  • 0.039 in (2)
  • 0.04 in (1)
  • 0.041 in (2)
  • 0.05 in (1)
  • 0.06 in (4)
  • 0.075 in (1)
  • 0.079 in (4)
  • 0.1 in (2)
  • 0.119 in (5)
  • 0.12 in (2)
  • 0.125 in (2)
  • 0.157 in (3)
  • 0.178 in (1)
  • 0.281 in (3)
  • 0.295 in (3)
  • 0.354 in (3)
  • 0.375 in (3)
  • 0.47 in (3)
  • 0.473 in (3)
  • 0.564 in (33)
  • 0.591 in (29)
  • 0.69 in (1)
  • 0.709 in (28)
  • 0.73 in (1)
  • 0.75 in (39)
  • 0.937 in (20)
  • 0.939 in (14)
  • 0.946 in (43)
  • 1.125 in (34)
  • 1.181 in (37)
  • 1.476 in (28)
  • 1.5 in (36)
  • 1.875 in (11)
  • 1.891 in (15)
Cutting Length Min - Cutting Length Max
Reach
Reach
  • 0.656 in (5)
  • 0.69 in (5)
  • 0.828 in (5)
  • 0.843 in (26)
  • 0.846 in (2)
  • 0.847 in (1)
  • 0.852 in (1)
  • 0.876 in (5)
  • 0.886 in (24)
  • 0.89 in (2)
  • 0.894 in (1)
  • 1.063 in (25)
  • 1.071 in (5)
  • 1.093 in (5)
  • 1.102 in (5)
  • 1.127 in (34)
  • 1.131 in (3)
  • 1.133 in (1)
  • 1.137 in (1)
  • 1.314 in (5)
  • 1.379 in (5)
  • 1.403 in (2)
  • 1.407 in (30)
  • 1.41 in (1)
  • 1.415 in (1)
  • 1.417 in (40)
  • 1.421 in (1)
  • 1.427 in (1)
  • 1.689 in (30)
  • 1.752 in (1)
  • 1.772 in (32)
  • 2.224 in (24)
  • 2.253 in (30)
  • 2.265 in (1)
  • 2.803 in (9)
  • 2.823 in (12)
Reach Min - Reach Max
Reach
Reach
  • 16.651 mm (5)
  • 17.5 mm (5)
  • 21.0 mm (5)
  • 21.401 mm (26)
  • 21.5 mm (2)
  • 21.526 mm (1)
  • 21.651 mm (1)
  • 22.25 mm (5)
  • 22.5 mm (24)
  • 22.6 mm (2)
  • 22.701 mm (1)
  • 27.0 mm (25)
  • 27.201 mm (5)
  • 27.75 mm (5)
  • 28.0 mm (5)
  • 28.6 mm (34)
  • 28.701 mm (2)
  • 28.725 mm (1)
  • 28.75 mm (1)
  • 28.85 mm (1)
  • 33.375 mm (5)
  • 35.0 mm (5)
  • 35.6 mm (2)
  • 35.7 mm (30)
  • 35.825 mm (1)
  • 35.95 mm (1)
  • 36.0 mm (40)
  • 36.1 mm (1)
  • 36.25 mm (1)
  • 42.901 mm (30)
  • 44.5 mm (1)
  • 45.0 mm (32)
  • 56.5 mm (24)
  • 57.2 mm (30)
  • 57.5 mm (1)
  • 71.2 mm (9)
  • 71.7 mm (12)
Reach Min - Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (6)
  • 60.0 (6)
  • 90.0 (418)
Tool Cutting Edge Angle Min - Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • DUO-LOCK (430)
Number of Flutes
Number of Flutes
  • 11 (6)
  • 15 (4)
  • 19 (8)
  • 2 (8)
  • 3 (69)
  • 4 (150)
  • 5 (76)
  • 6 (99)
  • 9 (10)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.149 in (5)
  • 1.181 in (5)
  • 1.335 in (26)
  • 1.339 in (2)
  • 1.344 in (1)
  • 1.354 in (4)
  • 1.379 in (25)
  • 1.383 in (2)
  • 1.399 in (3)
  • 1.417 in (5)
  • 1.467 in (5)
  • 1.655 in (30)
  • 1.661 in (4)
  • 1.717 in (40)
  • 1.72 in (2)
  • 1.721 in (1)
  • 1.726 in (1)
  • 1.736 in (1)
  • 1.881 in (5)
  • 1.891 in (5)
  • 2.189 in (2)
  • 2.193 in (33)
  • 2.198 in (1)
  • 2.205 in (43)
  • 2.209 in (1)
  • 2.213 in (1)
  • 2.215 in (1)
  • 2.224 in (3)
  • 2.255 in (5)
  • 2.319 in (5)
  • 2.63 in (33)
  • 2.65 in (1)
  • 2.713 in (33)
  • 2.717 in (4)
  • 2.988 in (1)
  • 3.461 in (28)
  • 3.488 in (35)
  • 3.508 in (1)
  • 4.398 in (10)
  • 4.417 in (16)
  • 13.146 in (1)
Over All Length [L] Min - Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 29.151 mm (5)
  • 30.0 mm (5)
  • 33.9 mm (26)
  • 34.0 mm (2)
  • 34.15 mm (1)
  • 34.4 mm (4)
  • 35.0 mm (25)
  • 35.1 mm (2)
  • 35.5 mm (3)
  • 36.0 mm (5)
  • 37.25 mm (5)
  • 42.0 mm (30)
  • 42.2 mm (4)
  • 43.6 mm (40)
  • 43.7 mm (2)
  • 43.725 mm (1)
  • 43.85 mm (1)
  • 44.1 mm (1)
  • 47.75 mm (5)
  • 48.0 mm (5)
  • 55.6 mm (2)
  • 55.7 mm (33)
  • 55.825 mm (1)
  • 56.0 mm (43)
  • 56.1 mm (1)
  • 56.2 mm (1)
  • 56.25 mm (1)
  • 56.5 mm (3)
  • 57.276 mm (5)
  • 58.901 mm (5)
  • 66.8 mm (33)
  • 67.3 mm (1)
  • 68.9 mm (33)
  • 69.0 mm (4)
  • 75.9 mm (1)
  • 87.9 mm (28)
  • 88.601 mm (35)
  • 89.101 mm (1)
  • 111.7 mm (10)
  • 112.2 mm (16)
  • 333.901 mm (1)
Over All Length [L] Min - Over All Length [L] Max
cornerConfiguration
Corner Style
Corner Style
  • BALL NOSE (28)
  • CHAMFER (52)
  • RADIUS (307)
  • SQUARE END (26)
  • TORUS (17)
Corner Radius
Corner Radius
  • 0.0 in (78)
  • 0.014 in (3)
  • 0.015 in (25)
  • 0.016 in (9)
  • 0.02 in (14)
  • 0.024 in (2)
  • 0.025 in (2)
  • 0.03 in (51)
  • 0.031 in (2)
  • 0.039 in (35)
  • 0.047 in (2)
  • 0.049 in (2)
  • 0.06 in (47)
  • 0.063 in (1)
  • 0.079 in (12)
  • 0.09 in (20)
  • 0.098 in (22)
  • 0.119 in (13)
  • 0.12 in (23)
  • 0.157 in (18)
  • 0.187 in (1)
  • 0.188 in (2)
  • 0.197 in (13)
  • 0.237 in (5)
  • 0.25 in (12)
  • 0.313 in (3)
  • 0.315 in (3)
  • 0.375 in (3)
  • 0.394 in (3)
  • 0.492 in (2)
  • 0.5 in (2)
Corner Radius Min - Corner Radius Max