Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

Kennametal Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Limitli süre geçerli olan tekliflerimizle az ödeyip daha az ödeyerek, üretim hacminizi yukarıda tutun! Şimdi Satın Alın

FAVORİ yeni parmak frezenizle tanışın! GOmill PRO

GOmill PRO, genel mühendislik, nakliye, enerji veya medikal endüstrilerinde çalışan ve çelikleri, paslanmaz çelikleri ve dökme demiri keserken çok yönlülük ve maliyet verimliliği arayan küçük ve orta ölçekli atölyeler için tercih edilen karbür parmak freze serisidir. Dört ağızlı, son teknoloji ürünü geometriye sahip ve %15’e varan performans iyileştirmeleri sunan GOmill PRO, bir sonraki seviye operasyonlar için güvenebileceğiniz hepsi bir arada bir parmak frezedir.

  • Daha iyi titreşim kontrolü, takım ömrü ve daha düzgün kesme için asimetrik bölünmüş ağız
  • Daha iyi titreşim kontrolü ve takım ömrü için değişken helis açısı
  • Daha iyi talaş boşaltma ve takım dayanımı için konik bir öz
  • Çelikler, paslanmaz çelikler ve dökme demir malzemelerde orta-yüksek kesmede yüksek performans için TiN kaplama
  • Daha yüksek kenar dayanıklılığı, daha iyi titreşim kontrolü ve iş parçası malzeme esnekliği için özel boşluk açılı tasarım

Kullanıldığı Sektörler

Filtreleri Seçin
Filtreler
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (133)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(133)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(133)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(133)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(133)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(133)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(133)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(133)
    • M Stainless Steel (133)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(133)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(133)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(133)
    • K Cast Iron (133)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(133)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(133)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(133)
    • N Non-Ferrous Materials (133)
      • N1
        Wrought Aluminum (133)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(133)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(133)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (133)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (133)
      • N6
        Carbon, Graphite Composites, CFRP (133)
      • N7
        MMC's (133)
    • S High-Temp Alloys (133)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(133)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(133)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(133)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(133)
    • H Hardened Materials (133)
      • H1
        Hardened Materials 44-48 HRC(133)
      • H2
        Hardened Materials 48-55 HRC(133)
      • H3
        Hardened Materials 56-60 HRC(133)
      • H4
        Hardened Materials >60 HRC(133)
    Applications
    Applications
    • PocketPocket (133)
    • Pocket HelicalPocket Helical (131)
    • Pocket MillingPocket Milling (133)
    • Profile MillingProfile Milling (14)
    • RampingRamping (119)
    • Shoulder Ball NoseShoulder Ball Nose (14)
    • Shoulder MillingShoulder Milling (133)
    • Shoulder Square EndShoulder Square End (119)
    • Slot Ball NoseSlot Ball Nose (14)
    • Slot MillingSlot Milling (133)
    • Slot Square EndSlot Square End (119)
    Cutting Diameter
    Cutting Diameter
    • 0.079 in(2)
    • 0.119 in(6)
    • 0.157 in(7)
    • 0.197 in(10)
    • 0.237 in(13)
    • 0.276 in(1)
    • 0.315 in(14)
    • 0.354 in(1)
    • 0.394 in(16)
    • 0.473 in(18)
    • 0.551 in(5)
    • 0.63 in(18)
    • 0.787 in(18)
    • 0.984 in(4)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 2.0 mm(2)
    • 3.0 mm(6)
    • 4.0 mm(7)
    • 5.0 mm(10)
    • 6.0 mm(13)
    • 7.0 mm(1)
    • 8.0 mm(14)
    • 9.0 mm(1)
    • 10.0 mm(16)
    • 12.0 mm(18)
    • 14.0 mm(5)
    • 16.0 mm(18)
    • 20.0 mm(18)
    • 25.0 mm(4)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 4.0 mm(1)
    • 6.0 mm(1)
    • 7.0 mm(2)
    • 8.0 mm(6)
    • 10.0 mm(2)
    • 11.0 mm(7)
    • 12.0 mm(2)
    • 13.0 mm(20)
    • 15.0 mm(2)
    • 19.0 mm(12)
    • 20.0 mm(2)
    • 22.0 mm(13)
    • 25.0 mm(3)
    • 26.0 mm(19)
    • 30.0 mm(1)
    • 32.0 mm(15)
    • 35.0 mm(2)
    • 38.0 mm(14)
    • 42.0 mm(2)
    • 45.0 mm(2)
    • 51.0 mm(1)
    • 52.0 mm(2)
    • 57.0 mm(2)
    Cutting Length Min-Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.157 in(1)
    • 0.237 in(1)
    • 0.276 in(2)
    • 0.315 in(6)
    • 0.394 in(2)
    • 0.433 in(7)
    • 0.473 in(2)
    • 0.512 in(20)
    • 0.591 in(2)
    • 0.748 in(12)
    • 0.787 in(2)
    • 0.866 in(13)
    • 0.984 in(3)
    • 1.024 in(19)
    • 1.181 in(1)
    • 1.26 in(15)
    • 1.379 in(2)
    • 1.496 in(14)
    • 1.655 in(2)
    • 1.772 in(2)
    • 2.008 in(1)
    • 2.047 in(2)
    • 2.244 in(2)
    Cutting Length Min-Cutting Length Max
    Reach
    Reach
    • 0.315 in(2)
    • 0.394 in(4)
    • 0.433 in(2)
    • 0.512 in(4)
    • 0.551 in(2)
    • 0.591 in(2)
    • 0.63 in(7)
    • 0.669 in(4)
    • 0.709 in(6)
    • 0.787 in(2)
    • 0.828 in(6)
    • 0.866 in(1)
    • 0.906 in(2)
    • 0.984 in(4)
    • 1.004 in(1)
    • 1.063 in(7)
    • 1.102 in(2)
    • 1.181 in(3)
    • 1.26 in(10)
    • 1.299 in(2)
    • 1.339 in(4)
    • 1.417 in(3)
    • 1.437 in(1)
    • 1.457 in(2)
    • 1.496 in(12)
    • 1.575 in(2)
    • 1.732 in(12)
    • 1.772 in(2)
    • 1.969 in(2)
    • 2.087 in(7)
    • 2.126 in(6)
    • 2.323 in(1)
    • 2.559 in(2)
    • 2.717 in(1)
    • 2.835 in(2)
    • 2.874 in(1)
    Reach Min-Reach Max
    Reach
    Reach
    • 8.0 mm(2)
    • 10.0 mm(4)
    • 11.0 mm(2)
    • 13.0 mm(4)
    • 14.0 mm(2)
    • 15.0 mm(2)
    • 16.0 mm(7)
    • 17.0 mm(4)
    • 18.0 mm(6)
    • 20.0 mm(2)
    • 21.0 mm(6)
    • 22.0 mm(1)
    • 23.0 mm(2)
    • 25.0 mm(4)
    • 25.5 mm(1)
    • 27.0 mm(7)
    • 28.0 mm(2)
    • 30.0 mm(3)
    • 32.0 mm(10)
    • 33.0 mm(2)
    • 34.0 mm(4)
    • 36.0 mm(3)
    • 36.5 mm(1)
    • 37.0 mm(2)
    • 38.0 mm(12)
    • 40.0 mm(2)
    • 44.0 mm(12)
    • 45.0 mm(2)
    • 50.0 mm(2)
    • 53.0 mm(7)
    • 54.0 mm(6)
    • 59.0 mm(1)
    • 65.0 mm(2)
    • 69.0 mm(1)
    • 72.0 mm(2)
    • 73.0 mm(1)
    Reach Min-Reach Max
    Connection Style
    Connection Style
    • Straight-Cylindrical (87)
    • Weldon (46)
    Over All Length [L]
    Over All Length [L]
    • 1.969 in(4)
    • 2.244 in(35)
    • 2.48 in(12)
    • 2.598 in(2)
    • 2.835 in(14)
    • 2.874 in(2)
    • 2.992 in(1)
    • 3.228 in(2)
    • 3.269 in(18)
    • 3.426 in(1)
    • 3.504 in(3)
    • 3.622 in(17)
    • 3.938 in(1)
    • 4.094 in(15)
    • 4.764 in(4)
    • 4.921 in(2)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 50.0 mm(4)
    • 57.0 mm(35)
    • 63.0 mm(12)
    • 66.0 mm(2)
    • 72.0 mm(14)
    • 73.0 mm(2)
    • 76.0 mm(1)
    • 82.0 mm(2)
    • 83.0 mm(18)
    • 87.0 mm(1)
    • 89.0 mm(3)
    • 92.0 mm(17)
    • 100.0 mm(1)
    • 104.0 mm(15)
    • 121.0 mm(4)
    • 125.0 mm(2)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • BALL NOSE (14)
    • CHAMFER (40)
    • RADIUS (57)
    • SQUARE END (22)
    Corner Radius
    Corner Radius
    • 0.0 in(62)
    • 0.008 in(3)
    • 0.016 in(6)
    • 0.02 in(21)
    • 0.039 in(8)
    • 0.06 in(4)
    • 0.079 in(5)
    • 0.098 in(6)
    • 0.119 in(5)
    • 0.157 in(5)
    • 0.197 in(2)
    • 0.237 in(2)
    • 0.315 in(2)
    • 0.394 in(2)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(62)
    • 0.2 mm(3)
    • 0.4 mm(6)
    • 0.5 mm(21)
    • 1.0 mm(8)
    • 1.5 mm(4)
    • 2.0 mm(5)
    • 2.5 mm(6)
    • 3.0 mm(5)
    • 4.0 mm(5)
    • 5.0 mm(2)
    • 6.0 mm(2)
    • 8.0 mm(2)
    • 10.0 mm(2)
    Corner Radius Min-Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(93)
    • 0.151 mm(15)
    • 0.2 mm(13)
    • 0.351 mm(12)
    Corner Chamfer Min-Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(93)
    • 0.006 in(15)
    • 0.008 in(13)
    • 0.014 in(12)
    Corner Chamfer Min-Corner Chamfer Max
    application
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 3.0 (119)
    Maximum Ramp Angle Min-Maximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.074 in(1)
    • 0.111 in(2)
    • 0.148 in(3)
    • 0.185 in(6)
    • 0.222 in(6)
    • 0.296 in(7)
    • 0.37 in(8)
    • 0.444 in(10)
    • 0.518 in(2)
    • 0.593 in(9)
    • 0.74 in(9)
    • 0.925 in(1)
    Neck Diameter Min-Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 1.875 mm(1)
    • 2.825 mm(2)
    • 3.75 mm(3)
    • 4.7 mm(6)
    • 5.65 mm(6)
    • 7.525 mm(7)
    • 9.4 mm(8)
    • 11.275 mm(10)
    • 13.15 mm(2)
    • 15.05 mm(9)
    • 18.8 mm(9)
    • 23.5 mm(1)
    Neck Diameter Min-Neck Diameter Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 6.0 mm(38)
    • 8.0 mm(15)
    • 10.0 mm(17)
    • 12.0 mm(18)
    • 14.0 mm(5)
    • 16.0 mm(18)
    • 20.0 mm(18)
    • 25.0 mm(4)
    Back-End Diameter Min-Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.237 in(38)
    • 0.315 in(15)
    • 0.394 in(17)
    • 0.473 in(18)
    • 0.551 in(5)
    • 0.63 in(18)
    • 0.787 in(18)
    • 0.984 in(4)
    Back-End Diameter Min-Back-End Diameter Max
    No filters matching ""
    GOmill™ PRO • Radiused • 4 Flutes • Necked • Plain Shank • Metric
    (39)

    GOmill™ PRO • Radiused • 4 Flutes • Necked • Plain Shank • Metric

    GOmill™ PRO • Chamfered • 4 Flutes • Necked • Weldon Shank • Metric
    (11)

    GOmill™ PRO • Chamfered • 4 Flutes • Necked • Weldon Shank • Metric

    GOmill™ PRO • Chamfered • 4 Flutes • Plain Shank • Metric
    (19)

    GOmill™ PRO • Chamfered • 4 Flutes • Plain Shank • Metric

    GOmill™ PRO • Chamfered • 4 Flutes • Weldon Shank • Metric
    (10)

    GOmill™ PRO • Chamfered • 4 Flutes • Weldon Shank • Metric

    GOmill™ PRO • Ball Nose • 4 Flutes • Necked • Plain Shank • Metric
    (7)

    GOmill™ PRO • Ball Nose • 4 Flutes • Necked • Plain Shank • Metric

    GOmill™ PRO • Radiused • 4 Flutes • Weldon Shank • Metric
    (9)

    GOmill™ PRO • Radiused • 4 Flutes • Weldon Shank • Metric

    GOmill™ PRO • Radiused • 4 Flutes • Plain Shank • Metric
    (9)

    GOmill™ PRO • Radiused • 4 Flutes • Plain Shank • Metric

    GOmill™ PRO • Square End • 4 Flutes • Weldon Shank • Metric
    (9)

    GOmill™ PRO • Square End • 4 Flutes • Weldon Shank • Metric

    GOmill™ PRO • Ball Nose • 4 Flutes • Necked • Weldon Shank • Metric
    (7)

    GOmill™ PRO • Ball Nose • 4 Flutes • Necked • Weldon Shank • Metric

    GOmill™ PRO • Square End • 4 Flutes • Plain Shank • Metric
    (13)

    GOmill™ PRO • Square End • 4 Flutes • Plain Shank • Metric

    Bize Sormak İstediğiniz Bir Şey Var Mı?

    Kalifiye personelimiz size yardımcı olmaya hazırdır.

    Satış ile İletişime Geçin
    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Lütfen geçerli bir ad girin
    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi
    Sepeti Görüntüle

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Katalog Numarası Kalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk