Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

Kennametal Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Ürün(ler) are being added to the cart
Sepeti Görüntüle
Çok geç olmadan bu özel tekliflerden faydalanın! Şimdi Satın Alın

Yüksek Performanslı Karbür Parmak Frezeler • Sert Çelikler

Filtreleri Seçin
Filtreler
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (116)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(116)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(5)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(116)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(5)
    • M Stainless Steel (5)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(5)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(5)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(5)
    • K Cast Iron (5)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(5)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(5)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(5)
    • S High-Temp Alloys (24)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(5)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(24)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(5)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(5)
    • H Hardened Materials (116)
      • H3
        Hardened Materials 56-60 HRC(116)
      • H2
        Hardened Materials 48-55 HRC(116)
      • H4
        Hardened Materials >60 HRC(111)
      • H1
        Hardened Materials 44-48 HRC(116)
    Applications
    Applications
    • DrillingDrilling (8)
    • PocketPocket (27)
    • Pocket HelicalPocket Helical (27)
    • Pocket MillingPocket Milling (27)
    • Profile MillingProfile Milling (81)
    • RampingRamping (24)
    • Shoulder Ball NoseShoulder Ball Nose (54)
    • Shoulder MillingShoulder Milling (41)
    • Shoulder Square EndShoulder Square End (62)
    • Slot Ball NoseSlot Ball Nose (6)
    • Slot MillingSlot Milling (27)
    • Slot Square EndSlot Square End (53)
    Cutting Diameter
    Cutting Diameter
    • 0.0394 in(1)
    • 0.0591 in(1)
    • 0.0787 in(5)
    • 0.1181 in(7)
    • 0.125 in(1)
    • 0.1575 in(8)
    • 0.1875 in(2)
    • 0.1969 in(8)
    • 0.2362 in(16)
    • 0.25 in(2)
    • 0.3125 in(1)
    • 0.315 in(16)
    • 0.375 in(2)
    • 0.3937 in(19)
    • 0.4724 in(12)
    • 0.5 in(2)
    • 0.625 in(1)
    • 0.6299 in(3)
    • 0.63 in(3)
    • 0.7874 in(4)
    • 0.9843 in(2)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 1.0 mm(1)
    • 1.5 mm(1)
    • 2.0 mm(5)
    • 3.0 mm(7)
    • 3.175 mm(1)
    • 4.0 mm(8)
    • 4.763 mm(2)
    • 5.0 mm(8)
    • 6.0 mm(16)
    • 6.35 mm(2)
    • 7.938 mm(1)
    • 8.0 mm(16)
    • 9.525 mm(2)
    • 10.0 mm(19)
    • 12.0 mm(12)
    • 12.7 mm(2)
    • 15.875 mm(1)
    • 16.0 mm(6)
    • 20.0 mm(4)
    • 25.0 mm(2)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 1.0 mm(2)
    • 1.5 mm(2)
    • 2.0 mm(5)
    • 2.5 mm(1)
    • 3.0 mm(6)
    • 3.175 mm(1)
    • 4.0 mm(10)
    • 4.763 mm(2)
    • 5.0 mm(10)
    • 6.0 mm(10)
    • 6.35 mm(2)
    • 7.938 mm(1)
    • 8.0 mm(8)
    • 9.0 mm(3)
    • 9.525 mm(2)
    • 10.0 mm(9)
    • 12.0 mm(12)
    • 12.7 mm(2)
    • 13.0 mm(1)
    • 15.0 mm(5)
    • 15.875 mm(1)
    • 16.0 mm(1)
    • 18.0 mm(3)
    • 19.0 mm(1)
    • 22.0 mm(1)
    • 24.0 mm(4)
    • 26.0 mm(1)
    • 30.0 mm(3)
    • 32.0 mm(1)
    • 36.0 mm(1)
    • 38.0 mm(1)
    • 45.0 mm(1)
    • 48.0 mm(1)
    • 60.0 mm(1)
    • 75.0 mm(1)
    Cutting Length Min-Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.0394 in(2)
    • 0.0591 in(2)
    • 0.0787 in(5)
    • 0.0984 in(1)
    • 0.1181 in(6)
    • 0.125 in(1)
    • 0.1575 in(10)
    • 0.1875 in(2)
    • 0.1969 in(10)
    • 0.2362 in(10)
    • 0.25 in(2)
    • 0.3125 in(1)
    • 0.315 in(8)
    • 0.3543 in(3)
    • 0.375 in(1)
    • 0.378 in(1)
    • 0.3937 in(9)
    • 0.4724 in(12)
    • 0.5 in(2)
    • 0.5118 in(1)
    • 0.5906 in(5)
    • 0.625 in(1)
    • 0.6299 in(1)
    • 0.7087 in(3)
    • 0.748 in(1)
    • 0.8661 in(1)
    • 0.9449 in(4)
    • 1.0236 in(1)
    • 1.1811 in(3)
    • 1.2598 in(1)
    • 1.4173 in(1)
    • 1.4961 in(1)
    • 1.7717 in(1)
    • 1.8898 in(1)
    • 2.3622 in(1)
    • 2.9528 in(1)
    Cutting Length Min-Cutting Length Max
    Reach
    Reach
    • 0.0787 in(1)
    • 0.1772 in(2)
    • 0.2165 in(2)
    • 0.2559 in(2)
    • 0.3089 in(1)
    • 0.3346 in(2)
    • 0.3543 in(3)
    • 0.4415 in(2)
    • 0.4724 in(3)
    • 0.4872 in(1)
    • 0.4921 in(2)
    • 0.4949 in(2)
    • 0.591 in(3)
    • 0.6102 in(2)
    • 0.6693 in(1)
    • 0.689 in(2)
    • 0.7087 in(3)
    • 0.7256 in(1)
    • 0.7283 in(2)
    • 0.7404 in(1)
    • 0.748 in(1)
    • 0.7573 in(1)
    • 0.7677 in(1)
    • 0.8416 in(2)
    • 0.9016 in(2)
    • 0.9449 in(3)
    • 1.0276 in(1)
    • 1.0778 in(2)
    • 1.1811 in(2)
    • 1.5551 in(1)
    • 1.6535 in(2)
    • 1.6761 in(2)
    • 1.6811 in(2)
    • 1.7077 in(5)
    • 1.8071 in(2)
    • 1.874 in(1)
    • 1.9291 in(2)
    • 2.0472 in(1)
    • 2.1014 in(4)
    • 2.2835 in(1)
    • 2.3323 in(6)
    • 2.367 in(1)
    • 2.441 in(1)
    • 2.4803 in(1)
    • 2.5291 in(4)
    Reach Min-Reach Max
    Reach
    Reach
    • 2.0 mm(1)
    • 4.5 mm(2)
    • 5.5 mm(2)
    • 6.5 mm(2)
    • 7.847 mm(1)
    • 8.5 mm(2)
    • 9.0 mm(3)
    • 11.2139 mm(2)
    • 12.0 mm(3)
    • 12.376 mm(1)
    • 12.5 mm(2)
    • 12.5717 mm(2)
    • 15.0 mm(3)
    • 15.5 mm(2)
    • 17.0 mm(1)
    • 17.5 mm(2)
    • 18.0 mm(3)
    • 18.43 mm(1)
    • 18.5 mm(2)
    • 18.806 mm(1)
    • 19.0 mm(1)
    • 19.235 mm(1)
    • 19.5 mm(1)
    • 21.376 mm(2)
    • 22.9 mm(2)
    • 24.0 mm(3)
    • 26.1 mm(1)
    • 27.376 mm(2)
    • 30.0 mm(2)
    • 39.5 mm(1)
    • 42.0 mm(2)
    • 42.5717 mm(1)
    • 42.572 mm(1)
    • 42.7 mm(2)
    • 43.3755 mm(4)
    • 43.376 mm(1)
    • 45.9 mm(2)
    • 47.6 mm(1)
    • 49.0 mm(2)
    • 52.0 mm(1)
    • 53.3755 mm(1)
    • 53.376 mm(3)
    • 58.0 mm(1)
    • 59.24 mm(4)
    • 59.2401 mm(2)
    • 60.0 mm(1)
    • 62.0 mm(1)
    • 63.0 mm(1)
    • 64.24 mm(2)
    • 64.2401 mm(2)
    Reach Min-Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 87.709 (1)
    • 87.99 (1)
    • 88.409 (1)
    • 88.452 (1)
    • 88.603 (1)
    • 88.625 (1)
    • 89.076 (1)
    • 89.215 (1)
    • 90.0 (104)
    Tool Cutting Edge Angle Min-Tool Cutting Edge Angle Max
    Number of Flutes
    Number of Flutes
    • 2 (44)
    • 3 (1)
    • 4 (57)
    • 6 (10)
    • 8 (4)
    Over All Length [L]
    Over All Length [L]
    • 1.5748 in(2)
    • 1.7717 in(5)
    • 1.9685 in(8)
    • 2.2441 in(1)
    • 2.3622 in(3)
    • 2.4409 in(1)
    • 2.4803 in(4)
    • 2.6772 in(1)
    • 2.7559 in(11)
    • 2.8346 in(1)
    • 2.9528 in(5)
    • 2.9921 in(5)
    • 3.0 in(3)
    • 3.1496 in(14)
    • 3.2677 in(1)
    • 3.5039 in(3)
    • 3.5433 in(6)
    • 3.622 in(1)
    • 3.6614 in(1)
    • 3.937 in(15)
    • 4.0 in(3)
    • 4.0945 in(3)
    • 4.252 in(1)
    • 4.3307 in(7)
    • 4.7638 in(1)
    • 4.9606 in(1)
    • 5.0 in(5)
    • 5.5118 in(1)
    • 5.9055 in(3)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(2)
    • 45.0 mm(5)
    • 50.0 mm(8)
    • 57.0 mm(1)
    • 60.0 mm(3)
    • 62.0 mm(1)
    • 63.0 mm(4)
    • 68.0 mm(1)
    • 70.0 mm(11)
    • 72.0 mm(1)
    • 75.0 mm(5)
    • 76.0 mm(5)
    • 76.2 mm(3)
    • 80.0 mm(14)
    • 83.0 mm(1)
    • 89.0 mm(3)
    • 90.0 mm(6)
    • 92.0 mm(1)
    • 93.0 mm(1)
    • 100.0 mm(15)
    • 101.6 mm(3)
    • 104.0 mm(3)
    • 108.0 mm(1)
    • 110.0 mm(7)
    • 121.0 mm(1)
    • 126.0 mm(1)
    • 127.0 mm(5)
    • 140.0 mm(1)
    • 150.0 mm(3)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • BALL NOSE (48)
    • RADIUS (31)
    • SQUARE END (4)
    • TORUS (33)
    Corner Radius
    Corner Radius
    • 0.0 in(4)
    • 0.01 in(1)
    • 0.012 in(1)
    • 0.02 in(25)
    • 0.03 in(5)
    • 0.039 in(23)
    • 0.04 in(1)
    • 0.059 in(9)
    • 0.063 in(1)
    • 0.079 in(9)
    • 0.094 in(1)
    • 0.098 in(7)
    • 0.118 in(7)
    • 0.125 in(1)
    • 0.157 in(7)
    • 0.188 in(1)
    • 0.197 in(6)
    • 0.236 in(4)
    • 0.25 in(1)
    • 0.313 in(1)
    • 0.315 in(1)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(4)
    • 0.25 mm(1)
    • 0.3 mm(1)
    • 0.5 mm(25)
    • 0.75 mm(5)
    • 1.0 mm(23)
    • 1.025 mm(1)
    • 1.5 mm(9)
    • 1.6 mm(1)
    • 2.0 mm(9)
    • 2.375 mm(1)
    • 2.5 mm(7)
    • 3.0 mm(7)
    • 3.175 mm(1)
    • 4.0 mm(7)
    • 4.775 mm(1)
    • 5.0 mm(6)
    • 6.0 mm(4)
    • 6.35 mm(1)
    • 7.95 mm(1)
    • 8.0 mm(1)
    Corner Radius Min-Corner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC633M (27)
    • KC639M (89)
    Rough Finish
    Rough Finish
    • F (111)
    • R (5)
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.063 in(1)
    • 0.0748 in(4)
    • 0.0945 in(1)
    • 0.1142 in(3)
    • 0.126 in(1)
    • 0.1496 in(4)
    • 0.1614 in(1)
    • 0.189 in(4)
    • 0.1929 in(1)
    • 0.2283 in(6)
    • 0.2559 in(1)
    • 0.307 in(1)
    • 0.3071 in(5)
    • 0.3228 in(1)
    • 0.3819 in(7)
    • 0.3858 in(2)
    • 0.3898 in(1)
    • 0.4606 in(5)
    • 0.5866 in(1)
    Neck Diameter Min-Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 1.6 mm(1)
    • 1.9 mm(4)
    • 2.4 mm(1)
    • 2.9 mm(3)
    • 3.2 mm(1)
    • 3.8 mm(4)
    • 4.1 mm(1)
    • 4.8 mm(4)
    • 4.9 mm(1)
    • 5.8 mm(6)
    • 6.5 mm(1)
    • 7.8 mm(6)
    • 8.2 mm(1)
    • 9.7 mm(7)
    • 9.8 mm(2)
    • 9.9 mm(1)
    • 11.7 mm(5)
    • 14.9 mm(1)
    Neck Diameter Min-Neck Diameter Max
    Center Cutting
    Center Cutting
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 4.0 mm(2)
    • 6.0 mm(41)
    • 6.35 mm(3)
    • 8.0 mm(16)
    • 9.525 mm(3)
    • 10.0 mm(19)
    • 12.0 mm(15)
    • 12.7 mm(2)
    • 15.875 mm(3)
    • 16.0 mm(6)
    • 20.0 mm(4)
    • 25.0 mm(2)
    Back-End Diameter Min-Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.1575 in(2)
    • 0.2362 in(41)
    • 0.25 in(3)
    • 0.315 in(16)
    • 0.375 in(3)
    • 0.3937 in(19)
    • 0.4724 in(15)
    • 0.5 in(2)
    • 0.625 in(3)
    • 0.6299 in(6)
    • 0.7874 in(4)
    • 0.9843 in(2)
    Back-End Diameter Min-Back-End Diameter Max
    No filters matching ""
    Yüksek Performanslı Sert İşleme • Masif Karbürlü Parmak Frezeler
    F6AV-F8AV...DL • DIN 6527 • Uzun ve Ekstra uzun
    (14)

    F6AV-F8AV...DL • DIN 6527 • Uzun ve Ekstra uzun

    F2AB...WL-WM-WX • Küresel başlı • Genişletilmiş boyun
    (14)

    F2AB...WL-WM-WX • Küresel başlı • Genişletilmiş boyun

    F4AL...WL-WM-WX • Küresel başlı • Konik boyun
    (12)

    F4AL...WL-WM-WX • Küresel başlı • Konik boyun

    F4AJ-F5AJ-F6AJ...WS-WL-WX • Ekstra uzun
    (4)

    F4AJ-F5AJ-F6AJ...WS-WL-WX • Ekstra uzun

    KenCut™ HM • HPRDM • Radiused • 4 Flutes • Plain Shank • Inch
    (5)

    KenCut™ HM • HPRDM • Radiused • 4 Flutes • Plain Shank • Inch

    F2AL...WL-WM-WX • Küresel başlı • Genişletilmiş boyun
    (8)

    F2AL...WL-WM-WX • Küresel başlı • Genişletilmiş boyun

    F4AT...WS-WM-WL • Yuvarlanma eğrisi yapan (trokoit) uç• Uzun erişimli
    (19)

    F4AT...WS-WM-WL • Yuvarlanma eğrisi yapan (trokoit) uç• Uzun erişimli

    F2AT...WM-WL-WX • Yuvarlanma eğrisi yapan (trokoit) uç • Uzun erişimli
    (13)

    F2AT...WM-WL-WX • Yuvarlanma eğrisi yapan (trokoit) uç • Uzun erişimli

    F2AL...WL-WM • Küresel başlı
    (5)

    F2AL...WL-WM • Küresel başlı

    KenCut™ HM • HPBNDM • Ball Nose • 4 Flutes • Plain Shank • Inch
    (6)

    KenCut™ HM • HPBNDM • Ball Nose • 4 Flutes • Plain Shank • Inch

    F2AL...WL-WM-WX • Küresel başlı • Uzun
    (4)

    F2AL...WL-WM-WX • Küresel başlı • Uzun

    F4AJ-F5AJ...WS-WM-WL-WX • Uzun
    (12)

    F4AJ-F5AJ...WS-WM-WL-WX • Uzun

    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Lütfen geçerli bir ad girin
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi
    Sepeti Görüntüle

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Katalog Numarası Kalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk